| Message ID | 1310251913-9877-1-git-send-email-troy.kisky@boundarydevices.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 11 Jul 09, Troy Kisky wrote: > The i.MX51 UART_PADDR value does not work for MX50/53. > > Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Amit Kucheria <amit.kucheria@canonical.com> but I think we should switch to runtime detection of the machine (machine ID?) and then set the port address. See arch/arm/plat-omap/include/plat/uncompress.h for a possible scheme. > --- > arch/arm/plat-mxc/include/mach/debug-macro.S | 9 ++++++++- > 1 files changed, 8 insertions(+), 1 deletions(-) > > diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S > index 8e8d175..3919ad4 100644 > --- a/arch/arm/plat-mxc/include/mach/debug-macro.S > +++ b/arch/arm/plat-mxc/include/mach/debug-macro.S > @@ -37,13 +37,20 @@ > #define UART_PADDR MX3x_UART1_BASE_ADDR > #endif > > -#ifdef CONFIG_ARCH_MX5 > +#ifdef CONFIG_ARCH_MX51 > #ifdef UART_PADDR > #error "CONFIG_DEBUG_LL is incompatible with multiple archs" > #endif > #define UART_PADDR MX51_UART1_BASE_ADDR > #endif > > +#if defined(CONFIG_ARCH_MX50) || defined(CONFIG_ARCH_MX53) > +#ifdef UART_PADDR > +#error "CONFIG_DEBUG_LL is incompatible with multiple archs" > +#endif > +#define UART_PADDR MX53_UART1_BASE_ADDR > +#endif > + > #define UART_VADDR IMX_IO_ADDRESS(UART_PADDR) > > .macro addruart, rp, rv > -- > 1.7.0.4 >
On Mon, Jul 11, 2011 at 12:06:09PM +0300, Amit Kucheria wrote: > On 11 Jul 09, Troy Kisky wrote: > > The i.MX51 UART_PADDR value does not work for MX50/53. > > > > Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> > > Acked-by: Amit Kucheria <amit.kucheria@canonical.com> > > but I think we should switch to runtime detection of the machine (machine > ID?) and then set the port address. > > See arch/arm/plat-omap/include/plat/uncompress.h for a possible scheme. mach/debug-macro.S and mach/uncompress.h are two different things. And the uncompress stuff is dynamic for mxc AFAIK. > > --- > > arch/arm/plat-mxc/include/mach/debug-macro.S | 9 ++++++++- > > 1 files changed, 8 insertions(+), 1 deletions(-) > > > > diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S > > index 8e8d175..3919ad4 100644 > > --- a/arch/arm/plat-mxc/include/mach/debug-macro.S > > +++ b/arch/arm/plat-mxc/include/mach/debug-macro.S > > @@ -37,13 +37,20 @@ > > #define UART_PADDR MX3x_UART1_BASE_ADDR > > #endif > > > > -#ifdef CONFIG_ARCH_MX5 > > +#ifdef CONFIG_ARCH_MX51 > > #ifdef UART_PADDR > > #error "CONFIG_DEBUG_LL is incompatible with multiple archs" > > #endif > > #define UART_PADDR MX51_UART1_BASE_ADDR > > #endif > > > > +#if defined(CONFIG_ARCH_MX50) || defined(CONFIG_ARCH_MX53) > > +#ifdef UART_PADDR > > +#error "CONFIG_DEBUG_LL is incompatible with multiple archs" > > +#endif > > +#define UART_PADDR MX53_UART1_BASE_ADDR > > +#endif > > + Hm, even though it's obvious, maybe add a comment that MX50_UART1_BASE_ADDR is identical to MX53_UART1_BASE_ADDR? Best regards Uwe
On 11 Jul 11, Uwe Kleine-König wrote: > On Mon, Jul 11, 2011 at 12:06:09PM +0300, Amit Kucheria wrote: > > On 11 Jul 09, Troy Kisky wrote: > > > The i.MX51 UART_PADDR value does not work for MX50/53. > > > > > > Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> > > > > Acked-by: Amit Kucheria <amit.kucheria@canonical.com> > > > > but I think we should switch to runtime detection of the machine (machine > > ID?) and then set the port address. > > > > See arch/arm/plat-omap/include/plat/uncompress.h for a possible scheme. > mach/debug-macro.S and mach/uncompress.h are two different things. And > the uncompress stuff is dynamic for mxc AFAIK. Indeed they're different. But it seems to me that arch/arm/mach-omap2/include/mach/debug-macro.S and arch/arm/plat-omap/include/plat/uncompress.h show clearly how we can deal with the serial port addresses (for DEBUG_LL) dynamically. No? > > > --- > > > arch/arm/plat-mxc/include/mach/debug-macro.S | 9 ++++++++- > > > 1 files changed, 8 insertions(+), 1 deletions(-) > > > > > > diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S > > > index 8e8d175..3919ad4 100644 > > > --- a/arch/arm/plat-mxc/include/mach/debug-macro.S > > > +++ b/arch/arm/plat-mxc/include/mach/debug-macro.S > > > @@ -37,13 +37,20 @@ > > > #define UART_PADDR MX3x_UART1_BASE_ADDR > > > #endif > > > > > > -#ifdef CONFIG_ARCH_MX5 > > > +#ifdef CONFIG_ARCH_MX51 > > > #ifdef UART_PADDR > > > #error "CONFIG_DEBUG_LL is incompatible with multiple archs" > > > #endif > > > #define UART_PADDR MX51_UART1_BASE_ADDR > > > #endif > > > > > > +#if defined(CONFIG_ARCH_MX50) || defined(CONFIG_ARCH_MX53) > > > +#ifdef UART_PADDR > > > +#error "CONFIG_DEBUG_LL is incompatible with multiple archs" > > > +#endif > > > +#define UART_PADDR MX53_UART1_BASE_ADDR > > > +#endif > > > + > Hm, even though it's obvious, maybe add a comment that > MX50_UART1_BASE_ADDR is identical to MX53_UART1_BASE_ADDR? >
On Mon, Jul 11, 2011 at 01:08:38PM +0300, Amit Kucheria wrote: > On 11 Jul 11, Uwe Kleine-König wrote: > > On Mon, Jul 11, 2011 at 12:06:09PM +0300, Amit Kucheria wrote: > > > On 11 Jul 09, Troy Kisky wrote: > > > > The i.MX51 UART_PADDR value does not work for MX50/53. > > > > > > > > Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> > > > > > > Acked-by: Amit Kucheria <amit.kucheria@canonical.com> > > > > > > but I think we should switch to runtime detection of the machine (machine > > > ID?) and then set the port address. > > > > > > See arch/arm/plat-omap/include/plat/uncompress.h for a possible scheme. > > mach/debug-macro.S and mach/uncompress.h are two different things. And > > the uncompress stuff is dynamic for mxc AFAIK. > > Indeed they're different. But it seems to me that > arch/arm/mach-omap2/include/mach/debug-macro.S and arch/arm/plat-omap/include/plat/uncompress.h > show clearly how we can deal with the serial port addresses (for DEBUG_LL) > dynamically. No? Looking at arch/arm/mach-omap2/include/mach/debug-macro.S it doesn't look easy. And considering that debug-macro.S is only needed for early board bringup, it's totally OK to have hardcoded values for only a single SOC at a time in it. And I really like to keep this simple as it is the first working debug mechanism during boot. Best regards Uwe
Troy, On Sat, Jul 09, 2011 at 03:51:53PM -0700, Troy Kisky wrote: > The i.MX51 UART_PADDR value does not work for MX50/53. > > Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Please rebase the patch on my for-next branch and use CONFIG_SOC_IMX* instead of CONFIG_ARCH_*. Sascha > --- > arch/arm/plat-mxc/include/mach/debug-macro.S | 9 ++++++++- > 1 files changed, 8 insertions(+), 1 deletions(-) > > diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S > index 8e8d175..3919ad4 100644 > --- a/arch/arm/plat-mxc/include/mach/debug-macro.S > +++ b/arch/arm/plat-mxc/include/mach/debug-macro.S > @@ -37,13 +37,20 @@ > #define UART_PADDR MX3x_UART1_BASE_ADDR > #endif > > -#ifdef CONFIG_ARCH_MX5 > +#ifdef CONFIG_ARCH_MX51 > #ifdef UART_PADDR > #error "CONFIG_DEBUG_LL is incompatible with multiple archs" > #endif > #define UART_PADDR MX51_UART1_BASE_ADDR > #endif > > +#if defined(CONFIG_ARCH_MX50) || defined(CONFIG_ARCH_MX53) > +#ifdef UART_PADDR > +#error "CONFIG_DEBUG_LL is incompatible with multiple archs" > +#endif > +#define UART_PADDR MX53_UART1_BASE_ADDR > +#endif > + > #define UART_VADDR IMX_IO_ADDRESS(UART_PADDR) > > .macro addruart, rp, rv > -- > 1.7.0.4 > >
On 7/12/2011 6:32 AM, Sascha Hauer wrote: > Troy, > > On Sat, Jul 09, 2011 at 03:51:53PM -0700, Troy Kisky wrote: >> The i.MX51 UART_PADDR value does not work for MX50/53. >> >> Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> > > Please rebase the patch on my for-next branch and use CONFIG_SOC_IMX* > instead of CONFIG_ARCH_*. > > Sascha > >> --- From arch/arm/mach-mx5/Kconfig # ARCH_MX5/50/53 are left to mark places where prevent multi-soc in single # image. So for most time, SOC_IMX50/51/53 should be used. So, it would seem to me that the ARCH variant would be correct. Troy
On Tue, Jul 12, 2011 at 10:04:39AM -0700, Troy Kisky wrote: > On 7/12/2011 6:32 AM, Sascha Hauer wrote: > > Troy, > > > > On Sat, Jul 09, 2011 at 03:51:53PM -0700, Troy Kisky wrote: > >> The i.MX51 UART_PADDR value does not work for MX50/53. > >> > >> Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> > > > > Please rebase the patch on my for-next branch and use CONFIG_SOC_IMX* > > instead of CONFIG_ARCH_*. > > > > Sascha > > > >> --- > > From arch/arm/mach-mx5/Kconfig > > # ARCH_MX5/50/53 are left to mark places where prevent multi-soc in single > # image. So for most time, SOC_IMX50/51/53 should be used. > > > So, it would seem to me that the ARCH variant would be correct. No, we want to get rid of CONFIG_ARCH_MX*. The debug macro stuff is a bit special as we intentionally disable multi soc kernels for the low level debug case. Sascha
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S index 8e8d175..3919ad4 100644 --- a/arch/arm/plat-mxc/include/mach/debug-macro.S +++ b/arch/arm/plat-mxc/include/mach/debug-macro.S @@ -37,13 +37,20 @@ #define UART_PADDR MX3x_UART1_BASE_ADDR #endif -#ifdef CONFIG_ARCH_MX5 +#ifdef CONFIG_ARCH_MX51 #ifdef UART_PADDR #error "CONFIG_DEBUG_LL is incompatible with multiple archs" #endif #define UART_PADDR MX51_UART1_BASE_ADDR #endif +#if defined(CONFIG_ARCH_MX50) || defined(CONFIG_ARCH_MX53) +#ifdef UART_PADDR +#error "CONFIG_DEBUG_LL is incompatible with multiple archs" +#endif +#define UART_PADDR MX53_UART1_BASE_ADDR +#endif + #define UART_VADDR IMX_IO_ADDRESS(UART_PADDR) .macro addruart, rp, rv
The i.MX51 UART_PADDR value does not work for MX50/53. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> --- arch/arm/plat-mxc/include/mach/debug-macro.S | 9 ++++++++- 1 files changed, 8 insertions(+), 1 deletions(-)