| Message ID | 1310252796-10596-4-git-send-email-philippe.retornaz@epfl.ch (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hello, On Sun, Jul 10, 2011 at 01:06:36AM +0200, Philippe Rétornaz wrote: > The leds and buttons subdevices cannot be used without additional > platform data. > > Use the presence of the platform data to enable the device instead > of an additional flag. I guess you could make some people happy by splitting this patch into: - mfd/mc13xxx: implicitly enable leds and buttons (and regulators?) - drop MC13XXX_USE_... in arch code because the patches have different paths into mainline (unless it's handled otherwise). And I wonder why you introduce MC13XXX_USE_BUTTON in the first place. Best regards Uwe
On Sun, Jul 10, 2011 at 10:04:50AM +0200, Uwe Kleine-König wrote: > - mfd/mc13xxx: implicitly enable leds and buttons (and > regulators?) It's nicer to enable regulators unconditionally, even if they're not controlled by software in the system reading their state can still be useful.
Le dimanche 10 juillet 2011 10:04:50, Uwe Kleine-König a écrit : > Hello, > > On Sun, Jul 10, 2011 at 01:06:36AM +0200, Philippe Rétornaz wrote: > > The leds and buttons subdevices cannot be used without additional > > platform data. > > > > Use the presence of the platform data to enable the device instead > > of an additional flag. > > I guess you could make some people happy by splitting this patch into: > > - mfd/mc13xxx: implicitly enable leds and buttons (and > regulators?) > - drop MC13XXX_USE_... in arch code But this mean that between the two commit the build will be broken or the behavior will change. Which will break bissections. For the regulator stuff, I don't want to change the behavior of others board as some (mx31lite) enable the regualtor without platform data. That's why I did not changed it. Moreover for the mc13892 chip (which share the same flag), the probe() does modify some registers, so it's not just some cosmetic change, it will change the behavior on some boards. BTW I will be on holydays next week so I won't be able to produce new patches soon. Thanks, Philippe
Hello Philippe, On Sun, Jul 10, 2011 at 01:33:09PM +0200, Philippe Rétornaz wrote: > Le dimanche 10 juillet 2011 10:04:50, Uwe Kleine-König a écrit : > > Hello, > > > > On Sun, Jul 10, 2011 at 01:06:36AM +0200, Philippe Rétornaz wrote: > > > The leds and buttons subdevices cannot be used without additional > > > platform data. > > > > > > Use the presence of the platform data to enable the device instead > > > of an additional flag. > > > > I guess you could make some people happy by splitting this patch into: > > > > - mfd/mc13xxx: implicitly enable leds and buttons (and > > regulators?) > > - drop MC13XXX_USE_... in arch code > > But this mean that between the two commit the build will be broken or the > behavior will change. Which will break bissections. If you don't remove the MC13XXX_USE_... constants the unconverted boards should still compile. > > For the regulator stuff, I don't want to change the behavior of others > board as some (mx31lite) enable the regualtor without platform data. > That's why I did not changed it. If having pdata=NULL is a valid config then either we need to keep the constant for regulators or (as Mark suggested) register unconditionally. > Moreover for the mc13892 chip (which share the same flag), the probe() does > modify some registers, so it's not just some cosmetic change, it will change > the behavior on some boards. no fear, that's what the -rc phase is there for. When improving something you often have to change behaviour. Best regards Uwe
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index 447143b..c4cd6b8 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -279,7 +279,7 @@ static struct mc13xxx_platform_data moboard_pmic = { .leds = &moboard_leds, .buttons = &moboard_buttons, .flags = MC13XXX_USE_REGULATOR | MC13XXX_USE_RTC | - MC13XXX_USE_ADC | MC13XXX_USE_LED | MC13XXX_USE_BUTTON, + MC13XXX_USE_ADC, }; static struct spi_board_info moboard_spi_board_info[] __initdata = { diff --git a/drivers/mfd/mc13xxx-core.c b/drivers/mfd/mc13xxx-core.c index 44edf78..130781f 100644 --- a/drivers/mfd/mc13xxx-core.c +++ b/drivers/mfd/mc13xxx-core.c @@ -774,11 +774,11 @@ err_revision: if (pdata->flags & MC13XXX_USE_TOUCHSCREEN) mc13xxx_add_subdevice(mc13xxx, "%s-ts"); - if (pdata->flags & MC13XXX_USE_LED) + if (pdata->leds) mc13xxx_add_subdevice_pdata(mc13xxx, "%s-led", pdata->leds, sizeof(*pdata->leds)); - if (pdata->flags & MC13XXX_USE_BUTTON) + if (pdata->buttons) mc13xxx_add_subdevice_pdata(mc13xxx, "%s-pwrbutton", pdata->buttons, sizeof(*pdata->buttons)); diff --git a/include/linux/mfd/mc13783.h b/include/linux/mfd/mc13783.h index bd4fbac..61dca4c 100644 --- a/include/linux/mfd/mc13783.h +++ b/include/linux/mfd/mc13783.h @@ -114,7 +114,6 @@ static inline int mc13783_irq_ack(struct mc13783 *mc13783, int irq) #define MC13783_USE_ADC MC13XXX_USE_ADC #define MC13783_USE_RTC MC13XXX_USE_RTC #define MC13783_USE_REGULATOR MC13XXX_USE_REGULATOR -#define MC13783_USE_LED MC13XXX_USE_LED #define MC13783_ADC_MODE_TS 1 #define MC13783_ADC_MODE_SINGLE_CHAN 2 diff --git a/include/linux/mfd/mc13xxx.h b/include/linux/mfd/mc13xxx.h index 22d8930..6c4b854 100644 --- a/include/linux/mfd/mc13xxx.h +++ b/include/linux/mfd/mc13xxx.h @@ -159,8 +159,6 @@ struct mc13xxx_platform_data { #define MC13XXX_USE_ADC (1 << 2) #define MC13XXX_USE_RTC (1 << 3) #define MC13XXX_USE_REGULATOR (1 << 4) -#define MC13XXX_USE_LED (1 << 5) -#define MC13XXX_USE_BUTTON (1 << 6) unsigned int flags; struct mc13xxx_regulator_platform_data regulators;
The leds and buttons subdevices cannot be used without additional platform data. Use the presence of the platform data to enable the device instead of an additional flag. Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> --- arch/arm/mach-imx/mach-mx31moboard.c | 2 +- drivers/mfd/mc13xxx-core.c | 4 ++-- include/linux/mfd/mc13783.h | 1 - include/linux/mfd/mc13xxx.h | 2 -- 4 files changed, 3 insertions(+), 6 deletions(-)