| Message ID | 1310742242-14647-2-git-send-email-nbowler@elliptictech.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 9e6b93b..d0d267a 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -318,6 +318,10 @@ static struct clk v2m_sp804_clk = { .rate = 1000000, }; +static struct clk v2m_ref_clk = { + .rate = 32768, +}; + static struct clk dummy_apb_pclk; static struct clk_lookup v2m_lookups[] = { @@ -348,6 +352,9 @@ static struct clk_lookup v2m_lookups[] = { }, { /* CLCD */ .dev_id = "mb:clcd", .clk = &osc1_clk, + }, { /* SP805 WDT */ + .dev_id = "mb:wdt", + .clk = &v2m_ref_clk, }, { /* SP804 timers */ .dev_id = "sp804", .con_id = "v2m-timer0",
It seems that an entry for the SP805 watchdog in the table of clocks was missing. This results in the sp805_wdt driver rejecting the device with the following errors: sp805-wdt mb:wdt: Clock not found sp805-wdt mb:wdt: Probe Failed!!! sp805-wdt: probe of mb:wdt failed with error -2 While not obviously stated in the hardware docs, the onboard SP810's "REFCLK" is connected to a 32.768KHz crystal, and this drives the watchdog. Add a struct clk and corresponding lookup entry for it. Signed-off-by: Nick Bowler <nbowler@elliptictech.com> --- arch/arm/mach-vexpress/v2m.c | 7 +++++++ 1 files changed, 7 insertions(+), 0 deletions(-)