| Message ID | 1311621941-4227-1-git-send-email-festevam@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hello Fabio, On Mon, Jul 25, 2011 at 04:25:41PM -0300, Fabio Estevam wrote: > - default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX51 || SOC_IMX53 > + default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX51 || SOC_IMX53 || SOC_IMX50 Maybe add i.MX50 between 35 and 51? I don't care much though. Uwe
On Mon, Jul 25, 2011 at 11:14:00PM +0200, Uwe Kleine-König wrote: > Hello Fabio, > > On Mon, Jul 25, 2011 at 04:25:41PM -0300, Fabio Estevam wrote: > > - default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX51 || SOC_IMX53 > > + default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX51 || SOC_IMX53 || SOC_IMX50 > Maybe add i.MX50 between 35 and 51? I don't care much though. Me neither. Applied. Sascha
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index b4e7c58..a303445 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -52,7 +52,6 @@ config MACH_MX50_RDP select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select IMX_HAVE_PLATFORM_SPI_IMX - select IMX_HAVE_PLATFORM_FEC help Include support for MX50 reference design platform (RDP) board. This includes specific configurations for the board and its peripherals. diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig index bd294ad..4c8b00b 100644 --- a/arch/arm/plat-mxc/devices/Kconfig +++ b/arch/arm/plat-mxc/devices/Kconfig @@ -1,6 +1,6 @@ config IMX_HAVE_PLATFORM_FEC bool - default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX51 || SOC_IMX53 + default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX51 || SOC_IMX53 || SOC_IMX50 config IMX_HAVE_PLATFORM_FLEXCAN select HAVE_CAN_FLEXCAN if CAN
Currently it is only the MX50_RDP board that selects IMX_HAVE_PLATFORM_FEC in its board Kconfig. Do like the other i.MX processors, which select IMX_HAVE_PLATFORM_FEC based on the processor type. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> --- arch/arm/mach-mx5/Kconfig | 1 - arch/arm/plat-mxc/devices/Kconfig | 2 +- 2 files changed, 1 insertions(+), 2 deletions(-)