From patchwork Sat Jul 30 18:53:21 2011 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Shawn Guo X-Patchwork-Id: 1022872 Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) by demeter1.kernel.org (8.14.4/8.14.4) with ESMTP id p6UIfxhp014084 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO) for ; Sat, 30 Jul 2011 18:42:19 GMT Received: from canuck.infradead.org ([2001:4978:20e::1]) by merlin.infradead.org with esmtps (Exim 4.76 #1 (Red Hat Linux)) id 1QnETn-0007tW-VG; Sat, 30 Jul 2011 18:41:44 +0000 Received: from localhost ([127.0.0.1] helo=canuck.infradead.org) by canuck.infradead.org with esmtp (Exim 4.76 #1 (Red Hat Linux)) id 1QnETm-0005ka-UX; Sat, 30 Jul 2011 18:41:43 +0000 Received: from mail-pz0-f43.google.com ([209.85.210.43]) by canuck.infradead.org with esmtps (Exim 4.76 #1 (Red Hat Linux)) id 1QnESv-0005cV-54 for linux-arm-kernel@lists.infradead.org; Sat, 30 Jul 2011 18:40:59 +0000 Received: by pzk1 with SMTP id 1so8483951pzk.16 for ; Sat, 30 Jul 2011 11:40:47 -0700 (PDT) Received: by 10.68.31.39 with SMTP id x7mr4974202pbh.226.1312051246904; Sat, 30 Jul 2011 11:40:46 -0700 (PDT) Received: from localhost.localdomain ([114.216.144.205]) by mx.google.com with ESMTPS id e6sm3488539pbm.87.2011.07.30.11.40.38 (version=TLSv1/SSLv3 cipher=OTHER); Sat, 30 Jul 2011 11:40:46 -0700 (PDT) From: Shawn Guo To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 3/3] arm/mx5: add device tree support for imx51 babbage Date: Sun, 31 Jul 2011 02:53:21 +0800 Message-Id: <1312052001-16660-4-git-send-email-shawn.guo@linaro.org> X-Mailer: git-send-email 1.7.4.1 In-Reply-To: <1312052001-16660-1-git-send-email-shawn.guo@linaro.org> References: <1312052001-16660-1-git-send-email-shawn.guo@linaro.org> X-CRM114-Version: 20090807-BlameThorstenAndJenny ( TRE 0.7.6 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20110730_144050_228243_5089B3E9 X-CRM114-Status: GOOD ( 15.53 ) X-Spam-Score: -0.7 (/) X-Spam-Report: SpamAssassin version 3.3.1 on canuck.infradead.org summary: Content analysis details: (-0.7 points) pts rule name description ---- ---------------------- -------------------------------------------------- -0.7 RCVD_IN_DNSWL_LOW RBL: Sender listed at http://www.dnswl.org/, low trust [209.85.210.43 listed in list.dnswl.org] Cc: Grant Likely , devicetree-discuss@lists.ozlabs.org, Shawn Guo , Sascha Hauer , patches@linaro.org X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.12 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Sender: linux-arm-kernel-bounces@lists.infradead.org Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org X-Greylist: IP, sender and recipient auto-whitelisted, not delayed by milter-greylist-4.2.6 (demeter1.kernel.org [140.211.167.41]); Sat, 30 Jul 2011 18:42:20 +0000 (UTC) It adds device tree support for imx51 babbage board. Signed-off-by: Shawn Guo Cc: Grant Likely Cc: Sascha Hauer --- .../devicetree/bindings/arm/fsl/boards.txt | 4 + arch/arm/boot/dts/imx51-babbage.dts | 548 +++++++++ arch/arm/boot/dts/imx51.dtsi | 1190 ++++++++++++++++++++ arch/arm/mach-mx5/Kconfig | 8 + arch/arm/mach-mx5/Makefile | 1 + arch/arm/mach-mx5/imx51-dt.c | 101 ++ 6 files changed, 1852 insertions(+), 0 deletions(-) create mode 100644 arch/arm/boot/dts/imx51-babbage.dts create mode 100644 arch/arm/boot/dts/imx51.dtsi create mode 100644 arch/arm/mach-mx5/imx51-dt.c diff --git a/Documentation/devicetree/bindings/arm/fsl/boards.txt b/Documentation/devicetree/bindings/arm/fsl/boards.txt index d1e8d6f..e2401cd 100644 --- a/Documentation/devicetree/bindings/arm/fsl/boards.txt +++ b/Documentation/devicetree/bindings/arm/fsl/boards.txt @@ -1,3 +1,7 @@ +i.MX51 Babbage Board +Required root node properties: + - compatible = "fsl,imx51-babbage", "fsl,imx51"; + i.MX53 Automotive Reference Design Board Required root node properties: - compatible = "fsl,imx53-ard", "fsl,imx53"; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts new file mode 100644 index 0000000..114253d --- /dev/null +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -0,0 +1,548 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx51.dtsi" + +/ { + model = "Freescale i.MX51 Babbage Board"; + compatible = "fsl,imx51-babbage", "fsl,imx51"; + + chosen { + bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait"; + }; + + memory { + reg = <0x90000000 0x20000000>; + }; + + aips@70000000 { /* aips-1 */ + spba@70000000 { + esdhc@70004000 { /* ESDHC1 */ + fsl,cd-internal; + fsl,wp-internal; + }; + + esdhc@70008000 { /* ESDHC2 */ + cd-gpios = <&gpio0 6 0>; /* GPIO1_6 */ + wp-gpios = <&gpio0 5 0>; /* GPIO1_5 */ + }; + + uart2: uart@7000c000 { /* UART3 */ + fsl,uart-has-rtscts; + }; + + ecspi@70010000 { /* ECSPI1 */ + fsl,spi-num-chipselects = <2>; + cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */ + <&gpio3 25 0>; /* GPIO4_25 */ + + pmic: mc13892@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mc13892"; + spi-max-frequency = <6000000>; + reg = <0>; + mc13xxx-irq-gpios = <&gpio0 8 0>; /* GPIO1_8 */ + fsl,mc13xxx-uses-regulator; + }; + + flash: at45db321d@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <25000000>; + reg = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "Kernel"; + reg = <0x40000 0x3c0000>; + }; + }; + }; + + esdhc@70020000 { /* ESDHC3 */ + status = "disabled"; + }; + + esdhc@70024000 { /* ESDHC4 */ + status = "disabled"; + }; + + i2c@70038000 { /* HS-I2C */ + status = "disabled"; + }; + }; + + iomuxc@73fa8000 { + /* + * UART1 + */ + uart1-rxd { + fsl,iomuxc-mux-mode = <0>; + fsl,iomuxc-select-input = <0x9e4 0x0>; + fsl,iomuxc-pad-ctl = <0x1c5>; + }; + + uart1-txd { + fsl,iomuxc-mux-mode = <0>; + fsl,iomuxc-pad-ctl = <0x1c5>; + }; + + uart1-rts { + fsl,iomuxc-mux-mode = <0>; + fsl,iomuxc-select-input = <0x9e0 0x0>; + fsl,iomuxc-pad-ctl = <0x1c5>; + }; + + uart1-cts { + fsl,iomuxc-mux-mode = <0>; + fsl,iomuxc-pad-ctl = <0x1c5>; + }; + + /* + * UART2 + */ + uart2-rxd { + fsl,iomuxc-mux-mode = <0>; + fsl,iomuxc-select-input = <0x9ec 0x2>; + fsl,iomuxc-pad-ctl = <0x1c5>; + }; + + uart2-txd { + fsl,iomuxc-mux-mode = <0>; + fsl,iomuxc-pad-ctl = <0x1c5>; + }; + + /* + * UART3 + */ + eim-d25 { /* UART3_RXD */ + fsl,iomuxc-mux-mode = <3>; + fsl,iomuxc-select-input = <0x9f4 0x0>; + fsl,iomuxc-pad-ctl = <0x1c5>; + }; + + eim-d26 { /* UART3_TXD */ + fsl,iomuxc-mux-mode = <3>; + fsl,iomuxc-pad-ctl = <0x1c5>; + }; + + eim-d27 { /* UART3_RTS */ + fsl,iomuxc-mux-mode = <3>; + fsl,iomuxc-select-input = <0x9f0 0x3>; + fsl,iomuxc-pad-ctl = <0x1c5>; + }; + + eim-d24 { /* UART3_CTS */ + fsl,iomuxc-mux-mode = <3>; + fsl,iomuxc-pad-ctl = <0x1c5>; + }; + + /* + * I2C1 + */ + eim-d16 { /* I2C1_SDA */ + fsl,iomuxc-mux-mode = <4>; + fsl,iomuxc-sion; + fsl,iomuxc-select-input = <0x9b4 0x0>; + fsl,iomuxc-pad-ctl = <0x1ec>; + }; + + eim-d19 { /* I2C1_SCL */ + fsl,iomuxc-mux-mode = <4>; + fsl,iomuxc-sion; + fsl,iomuxc-select-input = <0x9b0 0x0>; + fsl,iomuxc-pad-ctl = <0x1ec>; + }; + + /* + * I2C2 + */ + key-col4 { /* I2C2_SCL */ + fsl,iomuxc-mux-mode = <3>; + fsl,iomuxc-sion; + fsl,iomuxc-select-input = <0x9b8 0x1>; + fsl,iomuxc-pad-ctl = <0x1ec>; + }; + + key-col5 { /* I2C2_SDA */ + fsl,iomuxc-mux-mode = <3>; + fsl,iomuxc-sion; + fsl,iomuxc-select-input = <0x9bc 0x1>; + fsl,iomuxc-pad-ctl = <0x1ec>; + }; + + /* + * HS-I2C + */ + i2c1-clk { + fsl,iomuxc-mux-mode = <0>; + fsl,iomuxc-sion; + fsl,iomuxc-pad-ctl = <0x1ec>; + }; + + i2c1-dat { + fsl,iomuxc-mux-mode = <0>; + fsl,iomuxc-sion; + fsl,iomuxc-pad-ctl = <0x1ec>; + }; + + /* + * USB HOST1 + */ + usbh1-clk { + fsl,iomuxc-mux-mode = <0>; + fsl,iomuxc-pad-ctl = <0x1e4>; + }; + + usbh1-dir { + fsl,iomuxc-mux-mode = <0>; + fsl,iomuxc-pad-ctl = <0x1e4>; + }; + + usbh1-stp { + fsl,iomuxc-mux-mode = <0>; + fsl,iomuxc-pad-ctl = <0x1e4>; + }; + + usbh1-nxt { + fsl,iomuxc-mux-mode = <0>; + fsl,iomuxc-pad-ctl = <0x1e4>; + }; + + usbh1-data0 { + fsl,iomuxc-mux-mode = <0>; + fsl,iomuxc-pad-ctl = <0x1e4>; + }; + + usbh1-data1 { + fsl,iomuxc-mux-mode = <0>; + fsl,iomuxc-pad-ctl = <0x1e4>; + }; + + usbh1-data2 { + fsl,iomuxc-mux-mode = <0>; + fsl,iomuxc-pad-ctl = <0x1e4>; + }; + + usbh1-data3 { + fsl,iomuxc-mux-mode = <0>; + fsl,iomuxc-pad-ctl = <0x1e4>; + }; + + usbh1-data4 { + fsl,iomuxc-mux-mode = <0>; + fsl,iomuxc-pad-ctl = <0x1e4>; + }; + + usbh1-data5 { + fsl,iomuxc-mux-mode = <0>; + fsl,iomuxc-pad-ctl = <0x1e4>; + }; + + usbh1-data6 { + fsl,iomuxc-mux-mode = <0>; + fsl,iomuxc-pad-ctl = <0x1e4>; + }; + + usbh1-data7 { + fsl,iomuxc-mux-mode = <0>; + fsl,iomuxc-pad-ctl = <0x1e4>; + }; + + gpio1-7 { /* RST_USB_HUB_B */ + fsl,iomuxc-mux-mode = <0>; + }; + + eim-d21 { /* GPIO2_5: RST_USB_PHY_B */ + fsl,iomuxc-mux-mode = <1>; + fsl,iomuxc-pad-ctl = <0x85>; + }; + + /* + * FEC + */ + eim-eb2 { /* FEC_MDIO */ + fsl,iomuxc-mux-mode = <3>; + fsl,iomuxc-select-input = <0x954 0x0>; + fsl,iomuxc-pad-ctl = <0x1e5>; + }; + + eim-eb3 { /* FEC_RDATA1 */ + fsl,iomuxc-mux-mode = <3>; + fsl,iomuxc-select-input = <0x95c 0x0>; + }; + + eim-cs2 { /* FEC_RDATA2 */ + fsl,iomuxc-mux-mode = <3>; + fsl,iomuxc-select-input = <0x960 0x0>; + }; + + eim-cs3 { /* FEC_RDATA3 */ + fsl,iomuxc-mux-mode = <3>; + fsl,iomuxc-select-input = <0x964 0x0>; + }; + + eim-cs4 { /* FEC_RX_ER */ + fsl,iomuxc-mux-mode = <3>; + fsl,iomuxc-select-input = <0x970 0x0>; + fsl,iomuxc-pad-ctl = <0x185>; + }; + + eim-cs5 { /* FEC_CRS */ + fsl,iomuxc-mux-mode = <3>; + fsl,iomuxc-select-input = <0x950 0x0>; + fsl,iomuxc-pad-ctl = <0x185>; + }; + + nandf-rb2 { /* FEC_COL */ + fsl,iomuxc-mux-mode = <1>; + fsl,iomuxc-select-input = <0x94c 0x0>; + fsl,iomuxc-pad-ctl = <0x185>; + }; + + nandf-rb3 { /* FEC_RX_CLK */ + fsl,iomuxc-mux-mode = <1>; + fsl,iomuxc-select-input = <0x968 0x0>; + fsl,iomuxc-pad-ctl = <0x185>; + }; + + nandf-d9 { /* FEC_RDATA0 */ + fsl,iomuxc-mux-mode = <2>; + fsl,iomuxc-sion; + fsl,iomuxc-select-input = <0x958 0x0>; + fsl,iomuxc-pad-ctl = <0x2180>; + }; + + nandf-d8 { /* FEC_TDATA0 */ + fsl,iomuxc-mux-mode = <2>; + fsl,iomuxc-pad-ctl = <0x2004>; + }; + + nandf-cs2 { /* FEC_TX_ER */ + fsl,iomuxc-mux-mode = <2>; + fsl,iomuxc-pad-ctl = <0x2004>; + }; + + nandf-cs3 { /* FEC_MDC */ + fsl,iomuxc-mux-mode = <2>; + fsl,iomuxc-pad-ctl = <0x2004>; + }; + + nandf-cs4 { /* FEC_TDATA1 */ + fsl,iomuxc-mux-mode = <2>; + fsl,iomuxc-pad-ctl = <0x2004>; + }; + + nandf-cs5 { /* FEC_TDATA2 */ + fsl,iomuxc-mux-mode = <2>; + fsl,iomuxc-pad-ctl = <0x2004>; + }; + + nandf-cs6 { /* FEC_TDATA3 */ + fsl,iomuxc-mux-mode = <2>; + fsl,iomuxc-pad-ctl = <0x2004>; + }; + + nandf-cs7 { /* FEC_TX_EN */ + fsl,iomuxc-mux-mode = <1>; + fsl,iomuxc-pad-ctl = <0x2004>; + }; + + nandf-rdy-int { /* FEC_TX_CLK */ + fsl,iomuxc-mux-mode = <1>; + fsl,iomuxc-select-input = <0x974 0x0>; + fsl,iomuxc-pad-ctl = <0x2180>; + }; + + eim-a20 { /* GPIO2_14: RST_ENET_B */ + fsl,iomuxc-mux-mode = <1>; + fsl,iomuxc-pad-ctl = <0x85>; + }; + + /* + * SD1 + */ + sd1-cmd { + fsl,iomuxc-mux-mode = <0>; + fsl,iomuxc-sion; + fsl,iomuxc-pad-ctl = <0x20d5>; + }; + + sd1-clk { + fsl,iomuxc-mux-mode = <0>; + fsl,iomuxc-sion; + fsl,iomuxc-pad-ctl = <0x21d5>; + }; + + sd1-data0 { + fsl,iomuxc-mux-mode = <0>; + fsl,iomuxc-sion; + fsl,iomuxc-pad-ctl = <0x20d5>; + }; + + sd1-data1 { + fsl,iomuxc-mux-mode = <0>; + fsl,iomuxc-sion; + fsl,iomuxc-pad-ctl = <0x20d5>; + }; + + sd1-data2 { + fsl,iomuxc-mux-mode = <0>; + fsl,iomuxc-sion; + fsl,iomuxc-pad-ctl = <0x20d5>; + }; + + sd1-data3 { + fsl,iomuxc-mux-mode = <0>; + fsl,iomuxc-sion; + fsl,iomuxc-pad-ctl = <0x20d5>; + }; + + gpio1-0 { /* SD1_CD */ + fsl,iomuxc-mux-mode = <0>; + fsl,iomuxc-pad-ctl = <0x20d5>; + }; + + gpio1-1 { /* SD1_WP */ + fsl,iomuxc-mux-mode = <0>; + fsl,iomuxc-pad-ctl = <0x20d5>; + }; + + /* + * SD2 + */ + sd2-cmd { + fsl,iomuxc-mux-mode = <0>; + fsl,iomuxc-sion; + fsl,iomuxc-pad-ctl = <0x20d5>; + }; + + sd2-clk { + fsl,iomuxc-mux-mode = <0>; + fsl,iomuxc-sion; + fsl,iomuxc-pad-ctl = <0x21d5>; + }; + + sd2-data0 { + fsl,iomuxc-mux-mode = <0>; + fsl,iomuxc-sion; + fsl,iomuxc-pad-ctl = <0x20d5>; + }; + + sd2-data1 { + fsl,iomuxc-mux-mode = <0>; + fsl,iomuxc-sion; + fsl,iomuxc-pad-ctl = <0x20d5>; + }; + + sd2-data2 { + fsl,iomuxc-mux-mode = <0>; + fsl,iomuxc-sion; + fsl,iomuxc-pad-ctl = <0x20d5>; + }; + + sd2-data3 { + fsl,iomuxc-mux-mode = <0>; + fsl,iomuxc-sion; + fsl,iomuxc-pad-ctl = <0x20d5>; + }; + + gpio1-5 { /* SD2_WP */ + fsl,iomuxc-mux-mode = <0>; + }; + + gpio1-6 { /* SD2_CD */ + fsl,iomuxc-mux-mode = <0>; + }; + + /* + * ECSPI1 + */ + cspi1-mosi { + fsl,iomuxc-mux-mode = <0>; + fsl,iomuxc-pad-ctl = <0x185>; + }; + + cspi1-miso { + fsl,iomuxc-mux-mode = <0>; + fsl,iomuxc-pad-ctl = <0x185>; + }; + + cspi1-sclk { + fsl,iomuxc-mux-mode = <0>; + fsl,iomuxc-pad-ctl = <0x185>; + }; + + cspi1-ss0 { /* GPIO4_24 */ + fsl,iomuxc-mux-mode = <3>; + fsl,iomuxc-pad-ctl = <0x85>; + }; + + cspi1-ss1 { /* GPIO4_25 */ + fsl,iomuxc-mux-mode = <3>; + fsl,iomuxc-pad-ctl = <0x85>; + }; + }; + + uart0: uart@73fbc000 { + fsl,uart-has-rtscts; + }; + }; + + aips@80000000 { /* aips-2 */ + ecspi@83fac000 { /* ECSPI2 */ + status = "disabled"; + }; + + sdma@83fb0000 { + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin"; + }; + + cspi@83fc0000 { + status = "disabled"; + }; + + i2c@83fc4000 { /* I2C2 */ + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + }; + }; + + i2c@83fc8000 { /* I2C1 */ + status = "disabled"; + }; + + fec@83fec000 { + phy-mode = "mii"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power Button"; + gpios = <&gpio1 21 0>; + linux,code = <116>; /* KEY_POWER */ + gpio-key,wakeup; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi new file mode 100644 index 0000000..484d145 --- /dev/null +++ b/arch/arm/boot/dts/imx51.dtsi @@ -0,0 +1,1190 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + interrupt-parent = <&tzic>; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + }; + + tzic: tz-interrupt-controller@e0000000 { + compatible = "fsl,imx51-tzic", "fsl,tzic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xe0000000 0x4000>; + }; + + aips@70000000 { /* AIPS1 */ + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x70000000 0x10000000>; + ranges; + + spba@70000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x70000000 0x40000>; + ranges; + + esdhc@70004000 { /* ESDHC1 */ + compatible = "fsl,imx51-esdhc"; + reg = <0x70004000 0x4000>; + interrupts = <1>; + }; + + esdhc@70008000 { /* ESDHC2 */ + compatible = "fsl,imx51-esdhc"; + reg = <0x70008000 0x4000>; + interrupts = <2>; + }; + + uart2: uart@7000c000 { /* UART3 */ + compatible = "fsl,imx51-uart", "fsl,imx21-uart"; + reg = <0x7000c000 0x4000>; + interrupts = <33>; + }; + + ecspi@70010000 { /* ECSPI1 */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx51-ecspi"; + reg = <0x70010000 0x4000>; + interrupts = <36>; + }; + + esdhc@70020000 { /* ESDHC3 */ + compatible = "fsl,imx51-esdhc"; + reg = <0x70020000 0x4000>; + interrupts = <3>; + }; + + esdhc@70024000 { /* ESDHC4 */ + compatible = "fsl,imx51-esdhc"; + reg = <0x70024000 0x4000>; + interrupts = <4>; + }; + + i2c@70038000 { /* HS-I2C */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx51-i2c", "fsl,imx1-i2c"; + reg = <0x70038000 0x4000>; + interrupts = <64>; + clock-frequency = <400000>; + }; + }; + + gpio0: gpio@73f84000 { /* GPIO1 */ + compatible = "fsl,imx51-gpio", "fsl,imx31-gpio"; + reg = <0x73f84000 0x4000>; + interrupts = <50 51>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio1: gpio@73f88000 { /* GPIO2 */ + compatible = "fsl,imx51-gpio", "fsl,imx31-gpio"; + reg = <0x73f88000 0x4000>; + interrupts = <52 53>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio2: gpio@73f8c000 { /* GPIO3 */ + compatible = "fsl,imx51-gpio", "fsl,imx31-gpio"; + reg = <0x73f8c000 0x4000>; + interrupts = <54 55>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio3: gpio@73f90000 { /* GPIO4 */ + compatible = "fsl,imx51-gpio", "fsl,imx31-gpio"; + reg = <0x73f90000 0x4000>; + interrupts = <56 57>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + wdt@73f98000 { /* WDOG1 */ + compatible = "fsl,imx51-wdt", "fsl,imx21-wdt"; + reg = <0x73f98000 0x4000>; + interrupts = <58>; + }; + + iomuxc@73fa8000 { + #address-cells = <2>; + #size-cells = <0>; + compatible = "fsl,imx51-iomuxc"; + reg = <0x73fa8000 0x4000>; + + eim-d16 { + reg = <0x5c 0x3f0>; + }; + + eim-d17 { + reg = <0x60 0x3f4>; + }; + + eim-d18 { + reg = <0x64 0x3f8>; + }; + + eim-d19 { + reg = <0x68 0x3fc>; + }; + + eim-d20 { + reg = <0x6c 0x400>; + }; + + eim-d21 { + reg = <0x70 0x404>; + }; + + eim-d22 { + reg = <0x74 0x408>; + }; + + eim-d23 { + reg = <0x78 0x40c>; + }; + + eim-d24 { + reg = <0x7c 0x410>; + }; + + eim-d25 { + reg = <0x80 0x414>; + }; + + eim-d26 { + reg = <0x84 0x418>; + }; + + eim-d27 { + reg = <0x88 0x41c>; + }; + + eim-d28 { + reg = <0x8c 0x420>; + }; + + eim-d29 { + reg = <0x90 0x424>; + }; + + eim-d30 { + reg = <0x94 0x428>; + }; + + eim-d31 { + reg = <0x98 0x42c>; + }; + + eim-a16 { + reg = <0x9c 0x430>; + }; + + eim-a17 { + reg = <0xa0 0x434>; + }; + + eim-a18 { + reg = <0xa4 0x438>; + }; + + eim-a19 { + reg = <0xa8 0x43c>; + }; + + eim-a20 { + reg = <0xac 0x440>; + }; + + eim-a21 { + reg = <0xb0 0x444>; + }; + + eim-a22 { + reg = <0xb4 0x448>; + }; + + eim-a23 { + reg = <0xb8 0x44c>; + }; + + eim-a24 { + reg = <0xbc 0x450>; + }; + + eim-a25 { + reg = <0xc0 0x454>; + }; + + eim-a26 { + reg = <0xc4 0x458>; + }; + + eim-a27 { + reg = <0xc8 0x45c>; + }; + + eim-eb0 { + reg = <0xcc 0x460>; + }; + + eim-eb1 { + reg = <0xd0 0x464>; + }; + + eim-eb2 { + reg = <0xd4 0x468>; + }; + + eim-eb3 { + reg = <0xd8 0x46c>; + }; + + eim-oe { + reg = <0xdc 0x470>; + }; + + eim-cs0 { + reg = <0xe0 0x474>; + }; + + eim-cs1 { + reg = <0xe4 0x478>; + }; + + eim-cs2 { + reg = <0xe8 0x47c>; + }; + + eim-cs3 { + reg = <0xec 0x480>; + }; + + eim-cs4 { + reg = <0xf0 0x484>; + }; + + eim-cs5 { + reg = <0xf4 0x488>; + }; + + eim-dtack { + reg = <0xf8 0x48c>; + }; + + eim-lba { + reg = <0xfc 0x494>; + }; + + eim-cre { + reg = <0x100 0x4a0>; + }; + + dram-cs1 { + reg = <0x104 0x4d0>; + }; + + nandf-we-b { + reg = <0x108 0x4e4>; + }; + + nandf-re-b { + reg = <0x10c 0x4e8>; + }; + + nandf-ale { + reg = <0x110 0x4ec>; + }; + + nandf-cle { + reg = <0x114 0x4f0>; + }; + + nandf-wp-b { + reg = <0x118 0x4f4>; + }; + + nandf-rb0 { + reg = <0x11c 0x4f8>; + }; + + nandf-rb1 { + reg = <0x120 0x4fc>; + }; + + nandf-rb2 { + reg = <0x124 0x500>; + }; + + nandf-rb3 { + reg = <0x128 0x504>; + }; + + gpio-nand { + reg = <0x12c 0x514>; + }; + + nandf-cs0 { + reg = <0x130 0x518>; + }; + + nandf-cs1 { + reg = <0x134 0x51c>; + }; + + nandf-cs2 { + reg = <0x138 0x520>; + }; + + nandf-cs3 { + reg = <0x13c 0x524>; + }; + + nandf-cs4 { + reg = <0x140 0x528>; + }; + + nandf-cs5 { + reg = <0x144 0x52c>; + }; + + nandf-cs6 { + reg = <0x148 0x530>; + }; + + nandf-cs7 { + reg = <0x14c 0x534>; + }; + + nandf-rdy-int { + reg = <0x150 0x538>; + }; + + nandf-d15 { + reg = <0x154 0x53c>; + }; + + nandf-d14 { + reg = <0x158 0x540>; + }; + + nandf-d13 { + reg = <0x15c 0x544>; + }; + + nandf-d12 { + reg = <0x160 0x548>; + }; + + nandf-d11 { + reg = <0x164 0x54c>; + }; + + nandf-d10 { + reg = <0x168 0x550>; + }; + + nandf-d9 { + reg = <0x16c 0x554>; + }; + + nandf-d8 { + reg = <0x170 0x558>; + }; + + nandf-d7 { + reg = <0x174 0x55c>; + }; + + nandf-d6 { + reg = <0x178 0x560>; + }; + + nandf-d5 { + reg = <0x17c 0x564>; + }; + + nandf-d4 { + reg = <0x180 0x568>; + }; + + nandf-d3 { + reg = <0x184 0x56c>; + }; + + nandf-d2 { + reg = <0x188 0x570>; + }; + + nandf-d1 { + reg = <0x18c 0x574>; + }; + + nandf-d0 { + reg = <0x190 0x578>; + }; + + csi1-d8 { + reg = <0x194 0x57c>; + }; + + csi1-d9 { + reg = <0x198 0x580>; + }; + + csi1-d10 { + reg = <0x19c 0x584>; + }; + + csi1-d11 { + reg = <0x1a0 0x588>; + }; + + csi1-d12 { + reg = <0x1a4 0x58c>; + }; + + csi1-d13 { + reg = <0x1a8 0x590>; + }; + + csi1-d14 { + reg = <0x1ac 0x594>; + }; + + csi1-d15 { + reg = <0x1b0 0x598>; + }; + + csi1-d16 { + reg = <0x1b4 0x59c>; + }; + + csi1-d17 { + reg = <0x1b8 0x5a0>; + }; + + csi1-d18 { + reg = <0x1bc 0x5a4>; + }; + + csi1-d19 { + reg = <0x1c0 0x5a8>; + }; + + csi1-vsync { + reg = <0x1c4 0x5ac>; + }; + + csi1-hsync { + reg = <0x1c8 0x5b0>; + }; + + csi1-pixclk { + reg = <0x000 0x5b4>; + }; + + csi1-mclk { + reg = <0x000 0x5b8>; + }; + + csi2-d12 { + reg = <0x1cc 0x5bc>; + }; + + csi2-d13 { + reg = <0x1d0 0x5c0>; + }; + + csi2-d14 { + reg = <0x1d4 0x5c4>; + }; + + csi2-d15 { + reg = <0x1d8 0x5c8>; + }; + + csi2-d16 { + reg = <0x1dc 0x5cc>; + }; + + csi2-d17 { + reg = <0x1e0 0x5d0>; + }; + + csi2-d18 { + reg = <0x1e4 0x5d4>; + }; + + csi2-d19 { + reg = <0x1e8 0x5d8>; + }; + + csi2-vsync { + reg = <0x1ec 0x5dc>; + }; + + csi2-hsync { + reg = <0x1f0 0x5e0>; + }; + + csi2-pixclk { + reg = <0x1f4 0x5e4>; + }; + + i2c1-clk { + reg = <0x1f8 0x5e8>; + }; + + i2c1-dat { + reg = <0x1fc 0x5ec>; + }; + + aud3-bb-txd { + reg = <0x200 0x5f0>; + }; + + aud3-bb-rxd { + reg = <0x204 0x5f4>; + }; + + aud3-bb-ck { + reg = <0x208 0x5f8>; + }; + + aud3-bb-fs { + reg = <0x20c 0x5fc>; + }; + + cspi1-mosi { + reg = <0x210 0x600>; + }; + + cspi1-miso { + reg = <0x214 0x604>; + }; + + cspi1-ss0 { + reg = <0x218 0x608>; + }; + + cspi1-ss1 { + reg = <0x21c 0x60c>; + }; + + cspi1-rdy { + reg = <0x220 0x610>; + }; + + cspi1-sclk { + reg = <0x224 0x614>; + }; + + uart1-rxd { + reg = <0x228 0x618>; + }; + + uart1-txd { + reg = <0x22c 0x61c>; + }; + + uart1-rts { + reg = <0x230 0x620>; + }; + + uart1-cts { + reg = <0x234 0x624>; + }; + + uart2-rxd { + reg = <0x238 0x628>; + }; + + uart2-txd { + reg = <0x23c 0x62c>; + }; + + uart3-rxd { + reg = <0x240 0x630>; + }; + + uart3-txd { + reg = <0x244 0x634>; + }; + + owire-line { + reg = <0x248 0x638>; + }; + + key-row0 { + reg = <0x24c 0x63c>; + }; + + key-row1 { + reg = <0x250 0x640>; + }; + + key-row2 { + reg = <0x254 0x644>; + }; + + key-row3 { + reg = <0x258 0x648>; + }; + + key-col0 { + reg = <0x25c 0x64c>; + }; + + key-col1 { + reg = <0x260 0x650>; + }; + + key-col2 { + reg = <0x264 0x654>; + }; + + key-col3 { + reg = <0x268 0x658>; + }; + + key-col4 { + reg = <0x26c 0x65c>; + }; + + key-col5 { + reg = <0x270 0x660>; + }; + + usbh1-clk { + reg = <0x278 0x678>; + }; + + usbh1-dir { + reg = <0x27c 0x67c>; + }; + + usbh1-stp { + reg = <0x280 0x680>; + }; + + usbh1-nxt { + reg = <0x284 0x684>; + }; + + usbh1-data0 { + reg = <0x288 0x688>; + }; + + usbh1-data1 { + reg = <0x28c 0x68c>; + }; + + usbh1-data2 { + reg = <0x290 0x690>; + }; + + usbh1-data3 { + reg = <0x294 0x694>; + }; + + usbh1-data4 { + reg = <0x298 0x698>; + }; + + usbh1-data5 { + reg = <0x29c 0x69c>; + }; + + usbh1-data6 { + reg = <0x2a0 0x6a0>; + }; + + usbh1-data7 { + reg = <0x2a4 0x6a4>; + }; + + di1-pin11 { + reg = <0x2a8 0x6a8>; + }; + + di1-pin12 { + reg = <0x2ac 0x6ac>; + }; + + di1-pin13 { + reg = <0x2b0 0x6b0>; + }; + + di1-d0-cs { + reg = <0x2b4 0x6b4>; + }; + + di1-d1-cs { + reg = <0x2b8 0x6b8>; + }; + + dispb2-ser-din { + reg = <0x2bc 0x6bc>; + }; + + dispb2-ser-dio { + reg = <0x2c0 0x6c0>; + }; + + dispb2-ser-clk { + reg = <0x2c4 0x6c4>; + }; + + dispb2-ser-rs { + reg = <0x2c8 0x6c8>; + }; + + disp1-dat0 { + reg = <0x2cc 0x6cc>; + }; + + disp1-dat1 { + reg = <0x2d0 0x6d0>; + }; + + disp1-dat2 { + reg = <0x2d4 0x6d4>; + }; + + disp1-dat3 { + reg = <0x2d8 0x6d8>; + }; + + disp1-dat4 { + reg = <0x2dc 0x6dc>; + }; + + disp1-dat5 { + reg = <0x2e0 0x6e0>; + }; + + disp1-dat6 { + reg = <0x2e4 0x6e4>; + }; + + disp1-dat7 { + reg = <0x2e8 0x6e8>; + }; + + disp1-dat8 { + reg = <0x2ec 0x6ec>; + }; + + disp1-dat9 { + reg = <0x2f0 0x6f0>; + }; + + disp1-dat10 { + reg = <0x2f4 0x6f4>; + }; + + disp1-dat11 { + reg = <0x2f8 0x6f8>; + }; + + disp1-dat12 { + reg = <0x2fc 0x6fc>; + }; + + disp1-dat13 { + reg = <0x300 0x700>; + }; + + disp1-dat14 { + reg = <0x304 0x704>; + }; + + disp1-dat15 { + reg = <0x308 0x708>; + }; + + disp1-dat16 { + reg = <0x30c 0x70c>; + }; + + disp1-dat17 { + reg = <0x310 0x710>; + }; + + disp1-dat18 { + reg = <0x314 0x714>; + }; + + disp1-dat19 { + reg = <0x318 0x718>; + }; + + disp1-dat20 { + reg = <0x31c 0x71c>; + }; + + disp1-dat21 { + reg = <0x320 0x720>; + }; + + disp1-dat22 { + reg = <0x324 0x724>; + }; + + disp1-dat23 { + reg = <0x328 0x728>; + }; + + di1-pin3 { + reg = <0x32c 0x72c>; + }; + + di1-pin2 { + reg = <0x330 0x734>; + }; + + di-gp2 { + reg = <0x338 0x740>; + }; + + di-gp3 { + reg = <0x33c 0x744>; + }; + + di2-pin4 { + reg = <0x340 0x748>; + }; + + di2-pin2 { + reg = <0x344 0x74c>; + }; + + di2-pin3 { + reg = <0x348 0x750>; + }; + + di2-disp-clk { + reg = <0x34c 0x754>; + }; + + di-gp4 { + reg = <0x350 0x758>; + }; + + disp2-dat0 { + reg = <0x354 0x75c>; + }; + + disp2-dat1 { + reg = <0x358 0x760>; + }; + + disp2-dat2 { + reg = <0x35c 0x764>; + }; + + disp2-dat3 { + reg = <0x360 0x768>; + }; + + disp2-dat4 { + reg = <0x364 0x76c>; + }; + + disp2-dat5 { + reg = <0x368 0x770>; + }; + + disp2-dat6 { + reg = <0x36c 0x774>; + }; + + disp2-dat7 { + reg = <0x370 0x778>; + }; + + disp2-dat8 { + reg = <0x374 0x77c>; + }; + + disp2-dat9 { + reg = <0x378 0x780>; + }; + + disp2-dat10 { + reg = <0x37c 0x784>; + }; + + disp2-dat11 { + reg = <0x380 0x788>; + }; + + disp2-dat12 { + reg = <0x384 0x78c>; + }; + + disp2-dat13 { + reg = <0x388 0x790>; + }; + + disp2-dat14 { + reg = <0x38c 0x794>; + }; + + disp2-dat15 { + reg = <0x390 0x798>; + }; + + sd1-cmd { + reg = <0x394 0x79c>; + }; + + sd1-clk { + reg = <0x398 0x7a0>; + }; + + sd1-data0 { + reg = <0x39c 0x7a4>; + }; + + eim-da0 { + reg = <0x01c 0x000>; + }; + + eim-da1 { + reg = <0x020 0x000>; + }; + + eim-da2 { + reg = <0x024 0x000>; + }; + + eim-da3 { + reg = <0x028 0x000>; + }; + + sd1-data1 { + reg = <0x3a0 0x7a8>; + }; + + eim-da4 { + reg = <0x02c 0x000>; + }; + + eim-da5 { + reg = <0x030 0x000>; + }; + + eim-da6 { + reg = <0x034 0x000>; + }; + + eim-da7 { + reg = <0x038 0x000>; + }; + + sd1-data2 { + reg = <0x3a4 0x7ac>; + }; + + eim-da10 { + reg = <0x044 0x000>; + }; + + eim-da11 { + reg = <0x048 0x000>; + }; + + eim-da8 { + reg = <0x03c 0x000>; + }; + + eim-da9 { + reg = <0x040 0x000>; + }; + + sd1-data3 { + reg = <0x3a8 0x7b0>; + }; + + gpio1-0 { + reg = <0x3ac 0x7b4>; + }; + + gpio1-1 { + reg = <0x3b0 0x7b8>; + }; + + eim-da12 { + reg = <0x04c 0x000>; + }; + + eim-da13 { + reg = <0x050 0x000>; + }; + + eim-da14 { + reg = <0x054 0x000>; + }; + + eim-da15 { + reg = <0x058 0x000>; + }; + + sd2-cmd { + reg = <0x3b4 0x000>; + }; + + sd2-clk { + reg = <0x3b8 0x7c0>; + }; + + sd2-data0 { + reg = <0x3bc 0x7c4>; + }; + + sd2-data1 { + reg = <0x3c0 0x7c8>; + }; + + sd2-data2 { + reg = <0x3c4 0x7cc>; + }; + + sd2-data3 { + reg = <0x3c8 0x7d0>; + }; + + gpio1-2 { + reg = <0x3cc 0x7d4>; + }; + + gpio1-3 { + reg = <0x3d0 0x7d8>; + }; + + pmic-int-req { + reg = <0x3d4 0x7fc>; + }; + + gpio1-4 { + reg = <0x3d8 0x804>; + }; + + gpio1-5 { + reg = <0x3dc 0x808>; + }; + + gpio1-6 { + reg = <0x3e0 0x80c>; + }; + + gpio1-7 { + reg = <0x3e4 0x810>; + }; + + gpio1-8 { + reg = <0x3e8 0x814>; + }; + + gpio1-9 { + reg = <0x3ec 0x818>; + }; + }; + + uart0: uart@73fbc000 { + compatible = "fsl,imx51-uart", "fsl,imx21-uart"; + reg = <0x73fbc000 0x4000>; + interrupts = <31>; + }; + + uart1: uart@73fc0000 { + compatible = "fsl,imx51-uart", "fsl,imx21-uart"; + reg = <0x73fc0000 0x4000>; + interrupts = <32>; + }; + }; + + aips@80000000 { /* AIPS2 */ + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x80000000 0x10000000>; + ranges; + + ecspi@83fac000 { /* ECSPI2 */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx51-ecspi"; + reg = <0x83fac000 0x4000>; + interrupts = <37>; + }; + + sdma@83fb0000 { + compatible = "fsl,imx51-sdma", "fsl,imx35-sdma"; + reg = <0x83fb0000 0x4000>; + interrupts = <6>; + }; + + cspi@83fc0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx51-cspi", "fsl,imx35-cspi"; + reg = <0x83fc0000 0x4000>; + interrupts = <38>; + }; + + i2c@83fc4000 { /* I2C2 */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx51-i2c", "fsl,imx1-i2c"; + reg = <0x83fc4000 0x4000>; + interrupts = <63>; + }; + + i2c@83fc8000 { /* I2C1 */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx51-i2c", "fsl,imx1-i2c"; + reg = <0x83fc8000 0x4000>; + interrupts = <62>; + }; + + fec@83fec000 { + compatible = "fsl,imx51-fec", "fsl,imx27-fec"; + reg = <0x83fec000 0x4000>; + interrupts = <87>; + }; + }; +}; diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index 9f60dc1..a2e8f3a 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -62,6 +62,14 @@ endif # ARCH_MX50_SUPPORTED if ARCH_MX51 comment "i.MX51 machines:" +config MACH_IMX51_DT + bool "Support i.MX51 platforms from device tree" + select SOC_IMX51 + select USE_OF + help + Include support for Freescale i.MX51 based platforms + using the device tree for discovery + config MACH_MX51_BABBAGE bool "Support MX51 BABBAGE platforms" select SOC_IMX51 diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile index a1fd712..f751115 100644 --- a/arch/arm/mach-mx5/Makefile +++ b/arch/arm/mach-mx5/Makefile @@ -24,4 +24,5 @@ obj-$(CONFIG_MACH_MX51_EFIKASB) += board-mx51_efikasb.o obj-$(CONFIG_MACH_MX50_RDP) += board-mx50_rdp.o obj-$(CONFIG_OF) += iomuxc-dt.o +obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o diff --git a/arch/arm/mach-mx5/imx51-dt.c b/arch/arm/mach-mx5/imx51-dt.c new file mode 100644 index 0000000..99effcf --- /dev/null +++ b/arch/arm/mach-mx5/imx51-dt.c @@ -0,0 +1,101 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include +#include +#include +#include +#include +#include + +/* + * Lookup table for attaching a specific name and platform_data pointer to + * devices as they get created by of_platform_populate(). Ideally this table + * would not exist, but the current clock implementation depends on some devices + * having a specific name. + */ +static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = { + OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART1_BASE_ADDR, "imx21-uart.0", NULL), + OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART2_BASE_ADDR, "imx21-uart.1", NULL), + OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART3_BASE_ADDR, "imx21-uart.2", NULL), + OF_DEV_AUXDATA("fsl,imx51-fec", MX51_FEC_BASE_ADDR, "imx27-fec.0", NULL), + OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC1_BASE_ADDR, "sdhci-esdhc-imx51.0", NULL), + OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC2_BASE_ADDR, "sdhci-esdhc-imx51.1", NULL), + OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC3_BASE_ADDR, "sdhci-esdhc-imx51.2", NULL), + OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC4_BASE_ADDR, "sdhci-esdhc-imx51.3", NULL), + OF_DEV_AUXDATA("fsl,imx51-ecspi", MX51_ECSPI1_BASE_ADDR, "imx51-ecspi.0", NULL), + OF_DEV_AUXDATA("fsl,imx51-ecspi", MX51_ECSPI2_BASE_ADDR, "imx51-ecspi.1", NULL), + OF_DEV_AUXDATA("fsl,imx51-cspi", MX51_CSPI_BASE_ADDR, "imx35-cspi.0", NULL), + OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C1_BASE_ADDR, "imx-i2c.0", NULL), + OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C2_BASE_ADDR, "imx-i2c.1", NULL), + OF_DEV_AUXDATA("fsl,imx51-sdma", MX51_SDMA_BASE_ADDR, "imx35-sdma", NULL), + OF_DEV_AUXDATA("fsl,imx51-wdt", MX51_WDOG1_BASE_ADDR, "imx2-wdt.0", NULL), + { /* sentinel */ } +}; + +static const struct of_device_id imx51_tzic_of_match[] __initconst = { + { .compatible = "fsl,imx51-tzic", }, + { /* sentinel */ } +}; + +static const struct of_device_id imx51_gpio_of_match[] __initconst = { + { .compatible = "fsl,imx51-gpio", }, + { /* sentinel */ } +}; + +static const struct of_device_id imx51_iomuxc_of_match[] __initconst = { + { .compatible = "fsl,imx51-iomuxc", }, + { /* sentinel */ } +}; + +static void __init imx51_dt_init(void) +{ + int gpio_irq = MXC_INTERNAL_IRQS + ARCH_NR_GPIOS; + + mxc_iomuxc_dt_init(imx51_iomuxc_of_match); + + irq_domain_generate_simple(imx51_tzic_of_match, MX51_TZIC_BASE_ADDR, 0); + gpio_irq -= 32; + irq_domain_generate_simple(imx51_gpio_of_match, MX51_GPIO1_BASE_ADDR, gpio_irq); + gpio_irq -= 32; + irq_domain_generate_simple(imx51_gpio_of_match, MX51_GPIO2_BASE_ADDR, gpio_irq); + gpio_irq -= 32; + irq_domain_generate_simple(imx51_gpio_of_match, MX51_GPIO3_BASE_ADDR, gpio_irq); + gpio_irq -= 32; + irq_domain_generate_simple(imx51_gpio_of_match, MX51_GPIO4_BASE_ADDR, gpio_irq); + + of_platform_populate(NULL, of_default_bus_match_table, + imx51_auxdata_lookup, NULL); +} + +static void __init imx51_timer_init(void) +{ + mx51_clocks_init(32768, 24000000, 22579200, 0); +} + +static struct sys_timer imx51_timer = { + .init = imx51_timer_init, +}; + +static const char *imx51_dt_board_compat[] __initdata = { + "fsl,imx51-babbage", + NULL +}; + +DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)") + .map_io = mx51_map_io, + .init_early = imx51_init_early, + .init_irq = mx51_init_irq, + .timer = &imx51_timer, + .init_machine = imx51_dt_init, + .dt_compat = imx51_dt_board_compat, +MACHINE_END