| Message ID | 1312215637-716-2-git-send-email-thomas.abraham@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon, Aug 01, 2011 at 05:20:36PM +0100, Thomas Abraham wrote: > Add a new basic Exynos4 machine with device tree support that can boot > on a Exynos4 processor based board and bring up the console. This acts > as a stating point to add device tree support for Exynos4 architecture. > > Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Hi Thomas, As discussed f2f at Linaro Connect, we'll defer this board support patch to v3.2, and use this week to eliminate the 'special' uart handling code. g. > --- > arch/arm/mach-exynos4/Kconfig | 10 +++ > arch/arm/mach-exynos4/Makefile | 1 + > arch/arm/mach-exynos4/mach-exynos4-dt.c | 118 +++++++++++++++++++++++++++++++ > 3 files changed, 129 insertions(+), 0 deletions(-) > create mode 100644 arch/arm/mach-exynos4/mach-exynos4-dt.c > > diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig > index 0c77ab9..c29de4e 100644 > --- a/arch/arm/mach-exynos4/Kconfig > +++ b/arch/arm/mach-exynos4/Kconfig > @@ -218,6 +218,16 @@ config MACH_NURI > help > Machine support for Samsung Mobile NURI Board. > > +config MACH_EXYNOS4_DT > + bool "Samsung Exynos4 Machine using device tree" > + select CPU_EXYNOS4210 > + select USE_OF > + select S3C_DEV_HSMMC > + select S3C_DEV_HSMMC2 > + select EXYNOS4_SETUP_SDHCI > + help > + Machine support for Samsung Exynos4 machine with device tree enabled. > + > endmenu > > comment "Configuration for HSMMC bus width" > diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile > index b7fe1d7..d2bf5bf 100644 > --- a/arch/arm/mach-exynos4/Makefile > +++ b/arch/arm/mach-exynos4/Makefile > @@ -30,6 +30,7 @@ obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o > obj-$(CONFIG_MACH_ARMLEX4210) += mach-armlex4210.o > obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o > obj-$(CONFIG_MACH_NURI) += mach-nuri.o > +obj-$(CONFIG_MACH_EXYNOS4_DT) += mach-exynos4-dt.o > > # device support > > diff --git a/arch/arm/mach-exynos4/mach-exynos4-dt.c b/arch/arm/mach-exynos4/mach-exynos4-dt.c > new file mode 100644 > index 0000000..8e9d2d7 > --- /dev/null > +++ b/arch/arm/mach-exynos4/mach-exynos4-dt.c > @@ -0,0 +1,118 @@ > +/* > + * Samsung's Exynos4 device tree enabled machine. > + * > + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. > + * http://www.samsung.com > + * Copyright (c) 2010-2011 Linaro Ltd. > + * www.linaro.org > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +#include <linux/serial_core.h> > +#include <linux/platform_device.h> > +#include <linux/io.h> > +#include <linux/of_platform.h> > +#include <linux/irq.h> > +#include <linux/irqdomain.h> > + > +#include <asm/mach/arch.h> > +#include <asm/mach-types.h> > + > +#include <plat/regs-serial.h> > +#include <plat/exynos4.h> > +#include <plat/cpu.h> > +#include <plat/sdhci.h> > + > +#include <mach/map.h> > + > +/* Following are default values for UCON, ULCON and UFCON UART registers */ > +#define SMDKV310_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ > + S3C2410_UCON_RXILEVEL | \ > + S3C2410_UCON_TXIRQMODE | \ > + S3C2410_UCON_RXIRQMODE | \ > + S3C2410_UCON_RXFIFO_TOI | \ > + S3C2443_UCON_RXERR_IRQEN) > + > +#define SMDKV310_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ > + S5PV210_UFCON_TXTRIG4 | \ > + S5PV210_UFCON_RXTRIG4) > + > +static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = { > + [0] = { > + .hwport = 0, > + .ucon = SMDKV310_UCON_DEFAULT, > + .ufcon = SMDKV310_UFCON_DEFAULT, > + }, > + [1] = { > + .hwport = 1, > + .ucon = SMDKV310_UCON_DEFAULT, > + .ufcon = SMDKV310_UFCON_DEFAULT, > + }, > + [2] = { > + .hwport = 2, > + .ucon = SMDKV310_UCON_DEFAULT, > + .ufcon = SMDKV310_UFCON_DEFAULT, > + }, > + [3] = { > + .hwport = 3, > + .ucon = SMDKV310_UCON_DEFAULT, > + .ufcon = SMDKV310_UFCON_DEFAULT, > + }, > +}; > + > +/* > + * The following lookup table is used to override device names when devices > + * are registered from device tree. This is temporarily added to enable > + * device tree support addition for the Exynos4 architecture. > + * > + * For drivers that require platform data to be provided from the machine > + * file, a platform data pointer can also be supplied along with the > + * devices names. Usually, the platform data elements that cannot be parsed > + * from the device tree by the drivers (example: function pointers) are > + * supplied. But it should be noted that this is a temporary mechanism and > + * at some point, the drivers should be capable of parsing all the platform > + * data from the device tree. > + */ > +static const struct of_dev_auxdata exynos4_auxdata_lookup[] __initconst = { > + OF_DEV_AUXDATA("samsung,s3c6410-sdhci", EXYNOS4_PA_HSMMC(2), > + "s3c-sdhci.2", &s3c_hsmmc2_def_platdata), > + OF_DEV_AUXDATA("samsung,s3c6410-sdhci", EXYNOS4_PA_HSMMC(0), > + "s3c-sdhci.0", &s3c_hsmmc0_def_platdata), > + {}, > +}; > + > +static void __init exynos4_dt_map_io(void) > +{ > + s5p_init_io(NULL, 0, S5P_VA_CHIPID); > + s3c24xx_init_clocks(24000000); > + s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs)); > +} > + > +static const struct of_device_id intc_of_match[] __initconst = { > + { .compatible = "samsung,exynos4-gic", }, > + {}, > +}; > + > +static void __init exynos4_dt_machine_init(void) > +{ > + irq_domain_generate_simple(intc_of_match, EXYNOS4_PA_GIC_DIST, 0); > + of_platform_populate(NULL, of_default_bus_match_table, > + exynos4_auxdata_lookup, NULL); > +} > + > +static char const *exynos4_dt_compat[] __initdata = { > + "samsung,exynos4", > + NULL > +}; > + > +DT_MACHINE_START(SMDKV310, "Samsung Exynos4 DT") > + /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ > + .init_irq = exynos4_init_irq, > + .map_io = exynos4_dt_map_io, > + .init_machine = exynos4_dt_machine_init, > + .timer = &exynos4_timer, > + .dt_compat = exynos4_dt_compat, > +MACHINE_END > -- > 1.7.4.1 >
diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig index 0c77ab9..c29de4e 100644 --- a/arch/arm/mach-exynos4/Kconfig +++ b/arch/arm/mach-exynos4/Kconfig @@ -218,6 +218,16 @@ config MACH_NURI help Machine support for Samsung Mobile NURI Board. +config MACH_EXYNOS4_DT + bool "Samsung Exynos4 Machine using device tree" + select CPU_EXYNOS4210 + select USE_OF + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC2 + select EXYNOS4_SETUP_SDHCI + help + Machine support for Samsung Exynos4 machine with device tree enabled. + endmenu comment "Configuration for HSMMC bus width" diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile index b7fe1d7..d2bf5bf 100644 --- a/arch/arm/mach-exynos4/Makefile +++ b/arch/arm/mach-exynos4/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o obj-$(CONFIG_MACH_ARMLEX4210) += mach-armlex4210.o obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o obj-$(CONFIG_MACH_NURI) += mach-nuri.o +obj-$(CONFIG_MACH_EXYNOS4_DT) += mach-exynos4-dt.o # device support diff --git a/arch/arm/mach-exynos4/mach-exynos4-dt.c b/arch/arm/mach-exynos4/mach-exynos4-dt.c new file mode 100644 index 0000000..8e9d2d7 --- /dev/null +++ b/arch/arm/mach-exynos4/mach-exynos4-dt.c @@ -0,0 +1,118 @@ +/* + * Samsung's Exynos4 device tree enabled machine. + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2010-2011 Linaro Ltd. + * www.linaro.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/serial_core.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/of_platform.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +#include <plat/regs-serial.h> +#include <plat/exynos4.h> +#include <plat/cpu.h> +#include <plat/sdhci.h> + +#include <mach/map.h> + +/* Following are default values for UCON, ULCON and UFCON UART registers */ +#define SMDKV310_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ + S3C2410_UCON_RXILEVEL | \ + S3C2410_UCON_TXIRQMODE | \ + S3C2410_UCON_RXIRQMODE | \ + S3C2410_UCON_RXFIFO_TOI | \ + S3C2443_UCON_RXERR_IRQEN) + +#define SMDKV310_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ + S5PV210_UFCON_TXTRIG4 | \ + S5PV210_UFCON_RXTRIG4) + +static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .ucon = SMDKV310_UCON_DEFAULT, + .ufcon = SMDKV310_UFCON_DEFAULT, + }, + [1] = { + .hwport = 1, + .ucon = SMDKV310_UCON_DEFAULT, + .ufcon = SMDKV310_UFCON_DEFAULT, + }, + [2] = { + .hwport = 2, + .ucon = SMDKV310_UCON_DEFAULT, + .ufcon = SMDKV310_UFCON_DEFAULT, + }, + [3] = { + .hwport = 3, + .ucon = SMDKV310_UCON_DEFAULT, + .ufcon = SMDKV310_UFCON_DEFAULT, + }, +}; + +/* + * The following lookup table is used to override device names when devices + * are registered from device tree. This is temporarily added to enable + * device tree support addition for the Exynos4 architecture. + * + * For drivers that require platform data to be provided from the machine + * file, a platform data pointer can also be supplied along with the + * devices names. Usually, the platform data elements that cannot be parsed + * from the device tree by the drivers (example: function pointers) are + * supplied. But it should be noted that this is a temporary mechanism and + * at some point, the drivers should be capable of parsing all the platform + * data from the device tree. + */ +static const struct of_dev_auxdata exynos4_auxdata_lookup[] __initconst = { + OF_DEV_AUXDATA("samsung,s3c6410-sdhci", EXYNOS4_PA_HSMMC(2), + "s3c-sdhci.2", &s3c_hsmmc2_def_platdata), + OF_DEV_AUXDATA("samsung,s3c6410-sdhci", EXYNOS4_PA_HSMMC(0), + "s3c-sdhci.0", &s3c_hsmmc0_def_platdata), + {}, +}; + +static void __init exynos4_dt_map_io(void) +{ + s5p_init_io(NULL, 0, S5P_VA_CHIPID); + s3c24xx_init_clocks(24000000); + s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs)); +} + +static const struct of_device_id intc_of_match[] __initconst = { + { .compatible = "samsung,exynos4-gic", }, + {}, +}; + +static void __init exynos4_dt_machine_init(void) +{ + irq_domain_generate_simple(intc_of_match, EXYNOS4_PA_GIC_DIST, 0); + of_platform_populate(NULL, of_default_bus_match_table, + exynos4_auxdata_lookup, NULL); +} + +static char const *exynos4_dt_compat[] __initdata = { + "samsung,exynos4", + NULL +}; + +DT_MACHINE_START(SMDKV310, "Samsung Exynos4 DT") + /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ + .init_irq = exynos4_init_irq, + .map_io = exynos4_dt_map_io, + .init_machine = exynos4_dt_machine_init, + .timer = &exynos4_timer, + .dt_compat = exynos4_dt_compat, +MACHINE_END
Add a new basic Exynos4 machine with device tree support that can boot on a Exynos4 processor based board and bring up the console. This acts as a stating point to add device tree support for Exynos4 architecture. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> --- arch/arm/mach-exynos4/Kconfig | 10 +++ arch/arm/mach-exynos4/Makefile | 1 + arch/arm/mach-exynos4/mach-exynos4-dt.c | 118 +++++++++++++++++++++++++++++++ 3 files changed, 129 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-exynos4/mach-exynos4-dt.c