@@ -1,5 +1,5 @@
# Common support
-obj-y := clock.o devices.o icoll.o iomux.o system.o timer.o
+obj-y := clock.o devices.o icoll.o iomux.o system.o timer.o usbh.o
obj-$(CONFIG_MXS_OCOTP) += ocotp.o
obj-$(CONFIG_PM) += pm.o
@@ -10,6 +10,7 @@
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/amba/bus.h>
+#include <linux/fsl_devices.h>
extern struct device mxs_apbh_bus;
@@ -42,6 +43,23 @@ struct mxs_auart_data {
struct platform_device *__init mxs_add_auart(
const struct mxs_auart_data *data);
+/* usb host */
+struct mxs_usb_private_date {
+ struct clk *usb_phy_clk;
+ int internal_phy_clk_already_on;
+ void __iomem *phy_regs; /* usb phy register base */
+ void __iomem *ctrl_regs; /* usb controller register base */
+};
+struct mxs_usbh_data {
+ int id;
+ resource_size_t iobase;
+ resource_size_t phy_iobase;
+ resource_size_t irq;
+};
+struct platform_device *__init mxs_add_mxs_usbh(
+ const struct mxs_usbh_data *data,
+ struct mxc_usbh_platform_data *pdata);
+
/* fec */
#include <linux/fec.h>
struct mxs_fec_data {
new file mode 100644
@@ -0,0 +1,240 @@
+/*
+ * Freescale USBPHY Register Definitions
+ *
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ * Xml Revision: 1.52
+ * Template revision: 26195
+ */
+
+#ifndef __ARCH_ARM_MXS__USBPHY_H
+#define __ARCH_ARM_MXS__USBPHY_H
+
+
+#define HW_USBPHY_PWD 0x00000000
+#define HW_USBPHY_PWD_SET 0x00000004
+#define HW_USBPHY_PWD_CLR 0x00000008
+#define HW_USBPHY_PWD_TOG 0x0000000c
+
+#define BM_USBPHY_PWD_RXPWDRX 0x00100000
+#define BM_USBPHY_PWD_RXPWDDIFF 0x00080000
+#define BM_USBPHY_PWD_RXPWD1PT1 0x00040000
+#define BM_USBPHY_PWD_RXPWDENV 0x00020000
+
+#define BM_USBPHY_PWD_TXPWDV2I 0x00001000
+#define BM_USBPHY_PWD_TXPWDIBIAS 0x00000800
+#define BM_USBPHY_PWD_TXPWDFS 0x00000400
+
+#define HW_USBPHY_TX 0x00000010
+#define HW_USBPHY_TX_SET 0x00000014
+#define HW_USBPHY_TX_CLR 0x00000018
+#define HW_USBPHY_TX_TOG 0x0000001c
+
+#define BP_USBPHY_TX_USBPHY_TX_EDGECTRL 26
+#define BM_USBPHY_TX_USBPHY_TX_EDGECTRL 0x1C000000
+#define BF_USBPHY_TX_USBPHY_TX_EDGECTRL(v) \
+ (((v) << 26) & BM_USBPHY_TX_USBPHY_TX_EDGECTRL)
+#define BM_USBPHY_TX_USBPHY_TX_SYNC_INVERT 0x02000000
+#define BM_USBPHY_TX_USBPHY_TX_SYNC_MUX 0x01000000
+
+#define BM_USBPHY_TX_TXENCAL45DP 0x00200000
+#define BP_USBPHY_TX_TXCAL45DP 16
+#define BM_USBPHY_TX_TXCAL45DP 0x000F0000
+#define BF_USBPHY_TX_TXCAL45DP(v) \
+ (((v) << 16) & BM_USBPHY_TX_TXCAL45DP)
+#define BM_USBPHY_TX_TXENCAL45DN 0x00002000
+#define BP_USBPHY_TX_TXCAL45DN 8
+#define BM_USBPHY_TX_TXCAL45DN 0x00000F00
+#define BF_USBPHY_TX_TXCAL45DN(v) \
+ (((v) << 8) & BM_USBPHY_TX_TXCAL45DN)
+
+#define BP_USBPHY_TX_D_CAL 0
+#define BM_USBPHY_TX_D_CAL 0x0000000F
+#define BF_USBPHY_TX_D_CAL(v) \
+ (((v) << 0) & BM_USBPHY_TX_D_CAL)
+
+#define HW_USBPHY_RX 0x00000020
+#define HW_USBPHY_RX_SET 0x00000024
+#define HW_USBPHY_RX_CLR 0x00000028
+#define HW_USBPHY_RX_TOG 0x0000002c
+
+#define BM_USBPHY_RX_RXDBYPASS 0x00400000
+#define BP_USBPHY_RX_DISCONADJ 4
+#define BM_USBPHY_RX_DISCONADJ 0x00000070
+#define BF_USBPHY_RX_DISCONADJ(v) \
+ (((v) << 4) & BM_USBPHY_RX_DISCONADJ)
+#define BP_USBPHY_RX_ENVADJ 0
+#define BM_USBPHY_RX_ENVADJ 0x00000007
+#define BF_USBPHY_RX_ENVADJ(v) \
+ (((v) << 0) & BM_USBPHY_RX_ENVADJ)
+
+#define HW_USBPHY_CTRL 0x00000030
+#define HW_USBPHY_CTRL_SET 0x00000034
+#define HW_USBPHY_CTRL_CLR 0x00000038
+#define HW_USBPHY_CTRL_TOG 0x0000003c
+
+#define BM_USBPHY_CTRL_SFTRST 0x80000000
+#define BM_USBPHY_CTRL_CLKGATE 0x40000000
+#define BM_USBPHY_CTRL_UTMI_SUSPENDM 0x20000000
+#define BM_USBPHY_CTRL_HOST_FORCE_LS_SE0 0x10000000
+#define BM_USBPHY_CTRL_ENAUTOSET_USBCLKS 0x04000000
+#define BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE 0x02000000
+#define BM_USBPHY_CTRL_FSDLL_RST_EN 0x01000000
+#define BM_USBPHY_CTRL_ENVBUSCHG_WKUP 0x00800000
+#define BM_USBPHY_CTRL_ENIDCHG_WKUP 0x00400000
+#define BM_USBPHY_CTRL_ENDPDMCHG_WKUP 0x00200000
+#define BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD 0x00100000
+#define BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE 0x00080000
+#define BM_USBPHY_CTRL_ENAUTO_PWRON_PLL 0x00040000
+#define BM_USBPHY_CTRL_WAKEUP_IRQ 0x00020000
+#define BM_USBPHY_CTRL_ENIRQWAKEUP 0x00010000
+#define BM_USBPHY_CTRL_ENUTMILEVEL3 0x00008000
+#define BM_USBPHY_CTRL_ENUTMILEVEL2 0x00004000
+#define BM_USBPHY_CTRL_DATA_ON_LRADC 0x00002000
+#define BM_USBPHY_CTRL_DEVPLUGIN_IRQ 0x00001000
+#define BM_USBPHY_CTRL_ENIRQDEVPLUGIN 0x00000800
+#define BM_USBPHY_CTRL_RESUME_IRQ 0x00000400
+#define BM_USBPHY_CTRL_ENIRQRESUMEDETECT 0x00000200
+#define BM_USBPHY_CTRL_RESUMEIRQSTICKY 0x00000100
+#define BM_USBPHY_CTRL_ENOTGIDDETECT 0x00000080
+#define BM_USBPHY_CTRL_DEVPLUGIN_POLARITY 0x00000020
+#define BM_USBPHY_CTRL_ENDEVPLUGINDETECT 0x00000010
+#define BM_USBPHY_CTRL_HOSTDISCONDETECT_IRQ 0x00000008
+#define BM_USBPHY_CTRL_ENIRQHOSTDISCON 0x00000004
+#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT 0x00000002
+
+#define HW_USBPHY_STATUS 0x00000040
+
+#define BM_USBPHY_STATUS_RESUME_STATUS 0x00000400
+#define BM_USBPHY_STATUS_OTGID_STATUS 0x00000100
+#define BM_USBPHY_STATUS_DEVPLUGIN_STATUS 0x00000040
+#define BM_USBPHY_STATUS_HOSTDISCONDETECT_STATUS 0x00000008
+
+#define HW_USBPHY_DEBUG 0x00000050
+#define HW_USBPHY_DEBUG_SET 0x00000054
+#define HW_USBPHY_DEBUG_CLR 0x00000058
+#define HW_USBPHY_DEBUG_TOG 0x0000005c
+
+#define BM_USBPHY_DEBUG_CLKGATE 0x40000000
+#define BM_USBPHY_DEBUG_HOST_RESUME_DEBUG 0x20000000
+#define BP_USBPHY_DEBUG_SQUELCHRESETLENGTH 25
+#define BM_USBPHY_DEBUG_SQUELCHRESETLENGTH 0x1E000000
+#define BF_USBPHY_DEBUG_SQUELCHRESETLENGTH(v) \
+ (((v) << 25) & BM_USBPHY_DEBUG_SQUELCHRESETLENGTH)
+#define BM_USBPHY_DEBUG_ENSQUELCHRESET 0x01000000
+#define BP_USBPHY_DEBUG_SQUELCHRESETCOUNT 16
+#define BM_USBPHY_DEBUG_SQUELCHRESETCOUNT 0x001F0000
+#define BF_USBPHY_DEBUG_SQUELCHRESETCOUNT(v) \
+ (((v) << 16) & BM_USBPHY_DEBUG_SQUELCHRESETCOUNT)
+#define BM_USBPHY_DEBUG_ENTX2RXCOUNT 0x00001000
+#define BP_USBPHY_DEBUG_TX2RXCOUNT 8
+#define BM_USBPHY_DEBUG_TX2RXCOUNT 0x00000F00
+#define BF_USBPHY_DEBUG_TX2RXCOUNT(v) \
+ (((v) << 8) & BM_USBPHY_DEBUG_TX2RXCOUNT)
+#define BP_USBPHY_DEBUG_ENHSTPULLDOWN 4
+#define BM_USBPHY_DEBUG_ENHSTPULLDOWN 0x00000030
+#define BF_USBPHY_DEBUG_ENHSTPULLDOWN(v) \
+ (((v) << 4) & BM_USBPHY_DEBUG_ENHSTPULLDOWN)
+#define BP_USBPHY_DEBUG_HSTPULLDOWN 2
+#define BM_USBPHY_DEBUG_HSTPULLDOWN 0x0000000C
+#define BF_USBPHY_DEBUG_HSTPULLDOWN(v) \
+ (((v) << 2) & BM_USBPHY_DEBUG_HSTPULLDOWN)
+#define BM_USBPHY_DEBUG_DEBUG_INTERFACE_HOLD 0x00000002
+#define BM_USBPHY_DEBUG_OTGIDPIOLOCK 0x00000001
+
+#define HW_USBPHY_DEBUG0_STATUS 0x00000060
+
+#define BP_USBPHY_DEBUG0_STATUS_SQUELCH_COUNT 26
+#define BM_USBPHY_DEBUG0_STATUS_SQUELCH_COUNT 0xFC000000
+#define BF_USBPHY_DEBUG0_STATUS_SQUELCH_COUNT(v) \
+ (((v) << 26) & BM_USBPHY_DEBUG0_STATUS_SQUELCH_COUNT)
+#define BP_USBPHY_DEBUG0_STATUS_UTMI_RXERROR_FAIL_COUNT 16
+#define BM_USBPHY_DEBUG0_STATUS_UTMI_RXERROR_FAIL_COUNT 0x03FF0000
+#define BF_USBPHY_DEBUG0_STATUS_UTMI_RXERROR_FAIL_COUNT(v) \
+ (((v) << 16) & BM_USBPHY_DEBUG0_STATUS_UTMI_RXERROR_FAIL_COUNT)
+#define BP_USBPHY_DEBUG0_STATUS_LOOP_BACK_FAIL_COUNT 0
+#define BM_USBPHY_DEBUG0_STATUS_LOOP_BACK_FAIL_COUNT 0x0000FFFF
+#define BF_USBPHY_DEBUG0_STATUS_LOOP_BACK_FAIL_COUNT(v) \
+ (((v) << 0) & BM_USBPHY_DEBUG0_STATUS_LOOP_BACK_FAIL_COUNT)
+
+#define HW_USBPHY_DEBUG1 0x00000070
+#define HW_USBPHY_DEBUG1_SET 0x00000074
+#define HW_USBPHY_DEBUG1_CLR 0x00000078
+#define HW_USBPHY_DEBUG1_TOG 0x0000007c
+
+#define BP_USBPHY_DEBUG1_ENTAILADJVD 13
+#define BM_USBPHY_DEBUG1_ENTAILADJVD 0x00006000
+#define BF_USBPHY_DEBUG1_ENTAILADJVD(v) \
+ (((v) << 13) & BM_USBPHY_DEBUG1_ENTAILADJVD)
+#define BM_USBPHY_DEBUG1_ENTX2TX 0x00001000
+#define BP_USBPHY_DEBUG1_DBG_ADDRESS 0
+#define BM_USBPHY_DEBUG1_DBG_ADDRESS 0x0000000F
+#define BF_USBPHY_DEBUG1_DBG_ADDRESS(v) \
+ (((v) << 0) & BM_USBPHY_DEBUG1_DBG_ADDRESS)
+
+#define HW_USBPHY_VERSION 0x00000080
+
+#define BP_USBPHY_VERSION_MAJOR 24
+#define BM_USBPHY_VERSION_MAJOR 0xFF000000
+#define BF_USBPHY_VERSION_MAJOR(v) \
+ (((v) << 24) & BM_USBPHY_VERSION_MAJOR)
+#define BP_USBPHY_VERSION_MINOR 16
+#define BM_USBPHY_VERSION_MINOR 0x00FF0000
+#define BF_USBPHY_VERSION_MINOR(v) \
+ (((v) << 16) & BM_USBPHY_VERSION_MINOR)
+#define BP_USBPHY_VERSION_STEP 0
+#define BM_USBPHY_VERSION_STEP 0x0000FFFF
+#define BF_USBPHY_VERSION_STEP(v) \
+ (((v) << 0) & BM_USBPHY_VERSION_STEP)
+
+#define HW_USBPHY_IP 0x00000090
+#define HW_USBPHY_IP_SET 0x00000094
+#define HW_USBPHY_IP_CLR 0x00000098
+#define HW_USBPHY_IP_TOG 0x0000009c
+
+#define BP_USBPHY_IP_DIV_SEL 23
+#define BM_USBPHY_IP_DIV_SEL 0x01800000
+#define BF_USBPHY_IP_DIV_SEL(v) \
+ (((v) << 23) & BM_USBPHY_IP_DIV_SEL)
+#define BV_USBPHY_IP_DIV_SEL__DEFAULT 0x0
+#define BV_USBPHY_IP_DIV_SEL__LOWER 0x1
+#define BV_USBPHY_IP_DIV_SEL__LOWEST 0x2
+#define BV_USBPHY_IP_DIV_SEL__UNDEFINED 0x3
+#define BP_USBPHY_IP_LFR_SEL 21
+#define BM_USBPHY_IP_LFR_SEL 0x00600000
+#define BF_USBPHY_IP_LFR_SEL(v) \
+ (((v) << 21) & BM_USBPHY_IP_LFR_SEL)
+#define BV_USBPHY_IP_LFR_SEL__DEFAULT 0x0
+#define BV_USBPHY_IP_LFR_SEL__TIMES_2 0x1
+#define BV_USBPHY_IP_LFR_SEL__TIMES_05 0x2
+#define BV_USBPHY_IP_LFR_SEL__UNDEFINED 0x3
+#define BP_USBPHY_IP_CP_SEL 19
+#define BM_USBPHY_IP_CP_SEL 0x00180000
+#define BF_USBPHY_IP_CP_SEL(v) \
+ (((v) << 19) & BM_USBPHY_IP_CP_SEL)
+#define BV_USBPHY_IP_CP_SEL__DEFAULT 0x0
+#define BV_USBPHY_IP_CP_SEL__TIMES_2 0x1
+#define BV_USBPHY_IP_CP_SEL__TIMES_05 0x2
+#define BV_USBPHY_IP_CP_SEL__UNDEFINED 0x3
+#define BM_USBPHY_IP_TSTI_TX_DP 0x00040000
+#define BM_USBPHY_IP_TSTI_TX_DM 0x00020000
+#define BM_USBPHY_IP_ANALOG_TESTMODE 0x00010000
+#define BM_USBPHY_IP_EN_USB_CLKS 0x00000004
+#define BM_USBPHY_IP_PLL_LOCKED 0x00000002
+#define BM_USBPHY_IP_PLL_POWER 0x00000001
+#endif /* __ARCH_ARM_MXS__USBPHY_H */
new file mode 100644
@@ -0,0 +1,182 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <mach/devices-common.h>
+#include "regs-usbphy-mxs.h"
+
+/* EHCI registers: */
+#define UOG_USBCMD (0x140) /* USB command register */
+#define UOG_USBSTS (0x144) /* USB status register */
+#define UOG_PORTSC1 (0x184) /* port status and control */
+/* x_PORTSCx */
+#define PORTSC_PTS_MASK (3 << 30) /* parallel xcvr mask */
+#define PORTSC_PTS_UTMI (0 << 30) /* UTMI/UTMI+ */
+#define PORTSC_PTW (1 << 28) /* UTMI width */
+/* USBCMD */
+#define UCMD_RUN_STOP (1 << 0) /* controller run/stop */
+#define UCMD_RESET (1 << 1) /* controller reset */
+
+#define HOSTPHY_CONNECT_STATE (1 << 3)
+#define STS_PCD (1 << 2) /* port change detect */
+
+static inline int fsl_platform_get_usb_connect_status
+ (struct mxs_usb_private_date *priv)
+{
+ u32 status;
+
+ status = __raw_readl(priv->phy_regs + HW_USBPHY_STATUS);
+
+ return ((status & HOSTPHY_CONNECT_STATE) == 0);
+}
+
+/* enable/disable high-speed disconnect detector of phy ctrl */
+static inline void fsl_platform_disconnect_detect
+ (struct mxs_usb_private_date *priv, int enable)
+{
+ if (enable) {
+ __raw_writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
+ priv->phy_regs + HW_USBPHY_CTRL_SET);
+ } else {
+ __raw_writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
+ priv->phy_regs + HW_USBPHY_CTRL_CLR);
+ }
+}
+
+void fsl_plt_usbh_irq_handler(struct mxc_usbh_platform_data *pdata)
+{
+ u32 status;
+ struct mxs_usb_private_date *priv = pdata->priv;
+
+ status = __raw_readl(priv->ctrl_regs + UOG_USBSTS);
+
+ if (status & STS_PCD)
+ fsl_platform_disconnect_detect(priv,
+ fsl_platform_get_usb_connect_status(priv));
+}
+
+static int usb_phy_enable(struct mxs_usb_private_date *priv)
+{
+ u32 tmp;
+ u32 i = 0;
+ void __iomem *usbcmd, *phy_ctrl, *portsc;
+
+ /* Reset USB IP */
+ /* Set run stop bit */
+ /* Send reset command */
+ usbcmd = priv->ctrl_regs + UOG_USBCMD;
+ tmp = __raw_readl(usbcmd); /* usb command */
+ tmp &= ~UCMD_RUN_STOP;
+ __raw_writel(tmp, usbcmd);
+ while (__raw_readl(usbcmd) & UCMD_RUN_STOP) {
+ i++;
+ if (i == 1000)
+ break;
+ mdelay(1);
+ }
+ tmp |= UCMD_RESET;
+ __raw_writel(tmp, usbcmd);
+ i = 0;
+ while (__raw_readl(usbcmd) & UCMD_RESET) {
+ i++;
+ if (i == 1000)
+ break;
+ mdelay(1);
+ }
+ mdelay(10);
+
+ /* Reset USBPHY module, set soft reset bit */
+ phy_ctrl = priv->phy_regs + HW_USBPHY_CTRL;
+ tmp = __raw_readl(phy_ctrl);
+ tmp |= BM_USBPHY_CTRL_SFTRST;
+ __raw_writel(tmp, phy_ctrl);
+ udelay(10);
+
+ /* clear CLKGATE and SFTRST bits to be out of reset mode*/
+ tmp = __raw_readl(phy_ctrl);
+ tmp &= ~(BM_USBPHY_CTRL_CLKGATE | BM_USBPHY_CTRL_SFTRST);
+ __raw_writel(tmp, phy_ctrl);
+ udelay(10);
+
+ /* set UTMI xcvr */
+ /* Workaround an IC issue for ehci driver:
+ * when turn off root hub port power, EHCI set
+ * PORTSC reserved bits to be 0, but PTW with 0
+ * means 8 bits tranceiver width, here change
+ * it back to be 16 bits and do PHY diable and
+ * then enable.
+ */
+ portsc = priv->ctrl_regs + UOG_PORTSC1;
+ tmp = __raw_readl(portsc);
+ tmp &= ~PORTSC_PTS_MASK;
+ tmp |= (PORTSC_PTS_UTMI | PORTSC_PTW);
+ __raw_writel(tmp, portsc);
+
+ /* Power up the PHY */
+ __raw_writel(0, priv->phy_regs + HW_USBPHY_PWD);
+ return 0;
+}
+
+static int fsl_usbh_init(struct platform_device *pdev)
+{
+ struct mxc_usbh_platform_data *pdata = pdev->dev.platform_data;
+ struct mxs_usb_private_date *priv = pdata->priv;
+ u32 tmp;
+
+ usb_phy_enable(priv);
+ /* enable FS/LS device */
+ tmp = __raw_readl(priv->phy_regs + HW_USBPHY_CTRL);
+ tmp |= (BM_USBPHY_CTRL_ENUTMILEVEL2 | BM_USBPHY_CTRL_ENUTMILEVEL3);
+ __raw_writel(tmp, priv->phy_regs + HW_USBPHY_CTRL);
+
+ return 0;
+}
+
+static void phy_clock_gate(struct mxs_usb_private_date *priv, bool on)
+{
+ u32 tmp;
+
+ if (on) {
+ priv->internal_phy_clk_already_on += 1;
+ if (priv->internal_phy_clk_already_on == 1) {
+ tmp = BM_USBPHY_CTRL_SFTRST | BM_USBPHY_CTRL_CLKGATE;
+ __raw_writel(tmp, priv->phy_regs + HW_USBPHY_CTRL_CLR);
+ }
+ } else {
+ priv->internal_phy_clk_already_on -= 1;
+ if (priv->internal_phy_clk_already_on == 0) {
+ tmp = BM_USBPHY_CTRL_CLKGATE;
+ __raw_writel(tmp, priv->phy_regs + HW_USBPHY_CTRL_SET);
+ }
+ }
+ if (WARN_ON(priv->internal_phy_clk_already_on < 0))
+ printk(KERN_ERR "please check phy clock ON/OFF sequence\n");
+
+}
+
+int fsl_usb_host_init(struct platform_device *pdev)
+{
+ struct mxc_usbh_platform_data *pdata = pdev->dev.platform_data;
+ struct mxs_usb_private_date *priv = pdata->priv;
+
+ clk_enable(priv->usb_phy_clk);
+ phy_clock_gate(priv, true);
+
+ return fsl_usbh_init(pdev);
+}
+
+int fsl_usb_host_uninit(struct platform_device *pdev)
+{
+ struct mxc_usbh_platform_data *pdata = pdev->dev.platform_data;
+ struct mxs_usb_private_date *priv = pdata->priv;
+
+ phy_clock_gate(priv, false);
+ clk_disable(priv->usb_phy_clk);
+
+ return 0;
+}
new file mode 100644
@@ -0,0 +1,13 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <linux/fsl_devices.h>
+#include <linux/platform_device.h>
+
+int fsl_usb_host_init(struct platform_device *pdev);
+int fsl_usb_host_uninit(struct platform_device *pdev);
+void fsl_plt_usbh_irq_handler(struct mxc_usbh_platform_data *pdata);
add usb phy register definitions and functions usb host driver will use these callback functions to initialize usb phy and change working mode These operations are platform specific although the PHY is integrated into SOC. Integrated SOC will have specific reset operation for example. Thus put these operations in platform layer as callback functions. Signed-off-by: Tony Lin <tony.lin@freescale.com> --- arch/arm/mach-mxs/Makefile | 2 +- arch/arm/mach-mxs/include/mach/devices-common.h | 18 ++ arch/arm/mach-mxs/regs-usbphy-mxs.h | 240 +++++++++++++++++++++++ arch/arm/mach-mxs/usbh.c | 182 +++++++++++++++++ arch/arm/mach-mxs/usbh.h | 13 ++ 5 files changed, 454 insertions(+), 1 deletions(-)