@@ -54,14 +54,6 @@ obj-$(CONFIG_ARCH_OMAP850) += gpio7xx.o
obj-$(CONFIG_ARCH_OMAP15XX) += gpio15xx.o
obj-$(CONFIG_ARCH_OMAP16XX) += gpio16xx.o
-# LEDs support
-led-$(CONFIG_MACH_OMAP_H2) += leds-h2p2-debug.o
-led-$(CONFIG_MACH_OMAP_H3) += leds-h2p2-debug.o
-led-$(CONFIG_MACH_OMAP_INNOVATOR) += leds-innovator.o
-led-$(CONFIG_MACH_OMAP_PERSEUS2) += leds-h2p2-debug.o
-led-$(CONFIG_MACH_OMAP_OSK) += leds-osk.o
-obj-$(CONFIG_LEDS) += $(led-y)
-
ifneq ($(CONFIG_FB_OMAP),)
obj-y += lcd_dma.o
endif
@@ -30,9 +30,10 @@
#include <linux/input.h>
#include <linux/i2c/tps65010.h>
#include <linux/smc91x.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
#include <mach/hardware.h>
-#include <asm/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -331,6 +332,32 @@ static struct platform_device h2_lcd_device = {
.id = -1,
};
+static struct gpio_led h2_gpio_led_pins[] = {
+ {
+ .name = "h2:red",
+ .default_trigger = "heartbeat",
+ .gpio = 3,
+ },
+ {
+ .name = "h2:green",
+ .default_trigger = "cpu",
+ .gpio = OMAP_MPUIO(4),
+ },
+};
+
+static struct gpio_led_platform_data h2_gpio_led_data = {
+ .leds = h2_gpio_led_pins,
+ .num_leds = ARRAY_SIZE(h2_gpio_led_pins),
+};
+
+static struct platform_device h2_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &h2_gpio_led_data,
+ },
+};
+
static struct platform_device *h2_devices[] __initdata = {
&h2_nor_device,
&h2_nand_device,
@@ -338,6 +365,7 @@ static struct platform_device *h2_devices[] __initdata = {
&h2_irda_device,
&h2_kp_device,
&h2_lcd_device,
+ &h2_gpio_leds,
};
static void __init h2_init_smc91x(void)
@@ -444,6 +472,10 @@ static void __init h2_init(void)
omap_cfg_reg(E19_1610_KBR4);
omap_cfg_reg(N19_1610_KBR5);
+ /* GPIO based LEDs */
+ omap_cfg_reg(P18_1610_GPIO3);
+ omap_cfg_reg(MPUIO4);
+
platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
omap_board_config = h2_config;
omap_board_config_size = ARRAY_SIZE(h2_config);
@@ -30,11 +30,12 @@
#include <linux/spi/spi.h>
#include <linux/i2c/tps65010.h>
#include <linux/smc91x.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
#include <asm/setup.h>
#include <asm/page.h>
#include <mach/hardware.h>
-#include <asm/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -344,6 +345,32 @@ static struct spi_board_info h3_spi_board_info[] __initdata = {
},
};
+static struct gpio_led h3_gpio_led_pins[] = {
+ {
+ .name = "h3:red",
+ .default_trigger = "heartbeat",
+ .gpio = 3,
+ },
+ {
+ .name = "h3:green",
+ .default_trigger = "cpu",
+ .gpio = OMAP_MPUIO(4),
+ },
+};
+
+static struct gpio_led_platform_data h3_gpio_led_data = {
+ .leds = h3_gpio_led_pins,
+ .num_leds = ARRAY_SIZE(h3_gpio_led_pins),
+};
+
+static struct platform_device h3_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &h3_gpio_led_data,
+ },
+};
+
static struct platform_device *devices[] __initdata = {
&nor_device,
&nand_device,
@@ -351,6 +378,7 @@ static struct platform_device *devices[] __initdata = {
&intlat_device,
&h3_kp_device,
&h3_lcd_device,
+ &h3_gpio_leds,
};
static struct omap_usb_config h3_usb_config __initdata = {
@@ -424,6 +452,10 @@ static void __init h3_init(void)
omap_cfg_reg(E19_1610_KBR4);
omap_cfg_reg(N19_1610_KBR5);
+ /* GPIO based LEDs */
+ omap_cfg_reg(P18_1610_GPIO3);
+ omap_cfg_reg(MPUIO4);
+
platform_add_devices(devices, ARRAY_SIZE(devices));
spi_register_board_info(h3_spi_board_info,
ARRAY_SIZE(h3_spi_board_info));
@@ -398,10 +398,37 @@ static struct platform_device osk5912_lcd_device = {
.id = -1,
};
+static struct gpio_led mistral_gpio_led_pins[] = {
+ {
+ .name = "mistral:red",
+ .default_trigger = "heartbeat",
+ .gpio = 3,
+ },
+ {
+ .name = "mistral:green",
+ .default_trigger = "cpu",
+ .gpio = OMAP_MPUIO(4),
+ },
+};
+
+static struct gpio_led_platform_data mistral_gpio_led_data = {
+ .leds = mistral_gpio_led_pins,
+ .num_leds = ARRAY_SIZE(mistral_gpio_led_pins),
+};
+
+static struct platform_device mistral_gpio_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &mistral_gpio_led_data,
+ },
+};
+
static struct platform_device *mistral_devices[] __initdata = {
&osk5912_kp_device,
&mistral_bl_device,
&osk5912_lcd_device,
+ &mistral_gpio_leds,
};
static int mistral_get_pendown_state(void)
@@ -526,6 +553,12 @@ static void __init osk_mistral_init(void)
if (gpio_request(2, "lcd_pwr") == 0)
gpio_direction_output(2, 1);
+ /*
+ * GPIO based LEDs
+ */
+ omap_cfg_reg(P18_1610_GPIO3);
+ omap_cfg_reg(MPUIO4);
+
i2c_register_board_info(1, mistral_i2c_board_info,
ARRAY_SIZE(mistral_i2c_board_info));
deleted file mode 100644
@@ -1,167 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds-h2p2-debug.c
- *
- * Copyright 2003 by Texas Instruments Incorporated
- *
- * There are 16 LEDs on the debug board (all green); four may be used
- * for logical 'green', 'amber', 'red', and 'blue' (after "claiming").
- *
- * The "surfer" expansion board and H2 sample board also have two-color
- * green+red LEDs (in parallel), used here for timer and idle indicators.
- */
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/sched.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/system.h>
-#include <asm/mach-types.h>
-
-#include <plat/fpga.h>
-#include <mach/gpio.h>
-
-#include "leds.h"
-
-
-#define GPIO_LED_RED 3
-#define GPIO_LED_GREEN OMAP_MPUIO(4)
-
-
-#define LED_STATE_ENABLED 0x01
-#define LED_STATE_CLAIMED 0x02
-#define LED_TIMER_ON 0x04
-
-#define GPIO_IDLE GPIO_LED_GREEN
-#define GPIO_TIMER GPIO_LED_RED
-
-
-void h2p2_dbg_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- static struct h2p2_dbg_fpga __iomem *fpga;
- static u16 led_state, hw_led_state;
-
- local_irq_save(flags);
-
- if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
- goto done;
-
- switch (evt) {
- case led_start:
- if (!fpga)
- fpga = ioremap(H2P2_DBG_FPGA_START,
- H2P2_DBG_FPGA_SIZE);
- if (fpga) {
- led_state |= LED_STATE_ENABLED;
- __raw_writew(~0, &fpga->leds);
- }
- break;
-
- case led_stop:
- case led_halted:
- /* all leds off during suspend or shutdown */
-
- if (! machine_is_omap_perseus2()) {
- gpio_set_value(GPIO_TIMER, 0);
- gpio_set_value(GPIO_IDLE, 0);
- }
-
- __raw_writew(~0, &fpga->leds);
- led_state &= ~LED_STATE_ENABLED;
- if (evt == led_halted) {
- iounmap(fpga);
- fpga = NULL;
- }
-
- goto done;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- led_state ^= LED_TIMER_ON;
-
- if (machine_is_omap_perseus2())
- hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER;
- else {
- gpio_set_value(GPIO_TIMER, led_state & LED_TIMER_ON);
- goto done;
- }
-
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- if (machine_is_omap_perseus2())
- hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE;
- else {
- gpio_set_value(GPIO_IDLE, 1);
- goto done;
- }
-
- break;
-
- case led_idle_end:
- if (machine_is_omap_perseus2())
- hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE;
- else {
- gpio_set_value(GPIO_IDLE, 0);
- goto done;
- }
-
- break;
-#endif
-
- case led_green_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_GREEN;
- break;
- case led_green_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_GREEN;
- break;
-
- case led_amber_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_AMBER;
- break;
- case led_amber_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_AMBER;
- break;
-
- case led_red_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_RED;
- break;
- case led_red_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_RED;
- break;
-
- case led_blue_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_BLUE;
- break;
- case led_blue_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_BLUE;
- break;
-
- default:
- break;
- }
-
-
- /*
- * Actually burn the LEDs
- */
- if (led_state & LED_STATE_ENABLED)
- __raw_writew(~hw_led_state, &fpga->leds);
-
-done:
- local_irq_restore(flags);
-}
deleted file mode 100644
@@ -1,99 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds-innovator.c
- */
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/system.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED 1
-#define LED_STATE_CLAIMED 2
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-void innovator_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch (evt) {
- case led_start:
- hw_led_state = 0;
- led_state = LED_STATE_ENABLED;
- break;
-
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- hw_led_state = 0;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state ^= 0;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state |= 0;
- break;
-
- case led_idle_end:
- if (!(led_state & LED_STATE_CLAIMED))
- hw_led_state &= ~0;
- break;
-#endif
-
- case led_halted:
- break;
-
- case led_green_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~0;
- break;
-
- case led_green_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= 0;
- break;
-
- case led_amber_on:
- break;
-
- case led_amber_off:
- break;
-
- case led_red_on:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state &= ~0;
- break;
-
- case led_red_off:
- if (led_state & LED_STATE_CLAIMED)
- hw_led_state |= 0;
- break;
-
- default:
- break;
- }
-
- local_irq_restore(flags);
-}
deleted file mode 100644
@@ -1,115 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds-osk.c
- *
- * LED driver for OSK with optional Mistral QVGA board
- */
-#include <linux/init.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/system.h>
-
-#include <mach/gpio.h>
-
-#include "leds.h"
-
-
-#define LED_STATE_ENABLED (1 << 0)
-#define LED_STATE_CLAIMED (1 << 1)
-static u8 led_state;
-
-#define TIMER_LED (1 << 3) /* Mistral board */
-#define IDLE_LED (1 << 4) /* Mistral board */
-static u8 hw_led_state;
-
-
-#ifdef CONFIG_OMAP_OSK_MISTRAL
-
-/* For now, all system indicators require the Mistral board, since that
- * LED can be manipulated without a task context. This LED is either red,
- * or green, but not both; it can't give the full "disco led" effect.
- */
-
-#define GPIO_LED_RED 3
-#define GPIO_LED_GREEN OMAP_MPUIO(4)
-
-static void mistral_setled(void)
-{
- int red = 0;
- int green = 0;
-
- if (hw_led_state & TIMER_LED)
- red = 1;
- else if (hw_led_state & IDLE_LED)
- green = 1;
- /* else both sides are disabled */
-
- gpio_set_value(GPIO_LED_GREEN, green);
- gpio_set_value(GPIO_LED_RED, red);
-}
-
-#endif
-
-void osk_leds_event(led_event_t evt)
-{
- unsigned long flags;
- u16 leds;
-
- local_irq_save(flags);
-
- if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
- goto done;
-
- leds = hw_led_state;
- switch (evt) {
- case led_start:
- led_state |= LED_STATE_ENABLED;
- hw_led_state = 0;
- leds = ~0;
- break;
-
- case led_halted:
- case led_stop:
- led_state &= ~LED_STATE_ENABLED;
- hw_led_state = 0;
- break;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = 0;
- leds = ~0;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
-#ifdef CONFIG_OMAP_OSK_MISTRAL
-
- case led_timer:
- hw_led_state ^= TIMER_LED;
- mistral_setled();
- break;
-
- case led_idle_start: /* idle == off */
- hw_led_state &= ~IDLE_LED;
- mistral_setled();
- break;
-
- case led_idle_end:
- hw_led_state |= IDLE_LED;
- mistral_setled();
- break;
-
-#endif /* CONFIG_OMAP_OSK_MISTRAL */
-
- default:
- break;
- }
-
- leds ^= hw_led_state;
-
-done:
- local_irq_restore(flags);
-}
deleted file mode 100644
@@ -1,69 +0,0 @@
-/*
- * linux/arch/arm/mach-omap1/leds.c
- *
- * OMAP LEDs dispatcher
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include <mach/gpio.h>
-#include <plat/mux.h>
-
-#include "leds.h"
-
-static int __init
-omap_leds_init(void)
-{
- if (!cpu_class_is_omap1())
- return -ENODEV;
-
- if (machine_is_omap_innovator())
- leds_event = innovator_leds_event;
-
- else if (machine_is_omap_h2()
- || machine_is_omap_h3()
- || machine_is_omap_perseus2())
- leds_event = h2p2_dbg_leds_event;
-
- else if (machine_is_omap_osk())
- leds_event = osk_leds_event;
-
- else
- return -1;
-
- if (machine_is_omap_h2()
- || machine_is_omap_h3()
-#ifdef CONFIG_OMAP_OSK_MISTRAL
- || machine_is_omap_osk()
-#endif
- ) {
-
- /* LED1/LED2 pins can be used as GPIO (as done here), or by
- * the LPG (works even in deep sleep!), to drive a bicolor
- * LED on the H2 sample board, and another on the H2/P2
- * "surfer" expansion board.
- *
- * The same pins drive a LED on the OSK Mistral board, but
- * that's a different kind of LED (just one color at a time).
- */
- omap_cfg_reg(P18_1610_GPIO3);
- if (gpio_request(3, "LED red") == 0)
- gpio_direction_output(3, 1);
- else
- printk(KERN_WARNING "LED: can't get GPIO3/red?\n");
-
- omap_cfg_reg(MPUIO4);
- if (gpio_request(OMAP_MPUIO(4), "LED green") == 0)
- gpio_direction_output(OMAP_MPUIO(4), 1);
- else
- printk(KERN_WARNING "LED: can't get MPUIO4/green?\n");
- }
-
- leds_event(led_start);
- return 0;
-}
-
-__initcall(omap_leds_init);
deleted file mode 100644
@@ -1,3 +0,0 @@
-extern void innovator_leds_event(led_event_t evt);
-extern void h2p2_dbg_leds_event(led_event_t evt);
-extern void osk_leds_event(led_event_t evt);
@@ -47,7 +47,6 @@
#include <asm/system.h>
#include <mach/hardware.h>
-#include <asm/leds.h>
#include <asm/irq.h>
#include <asm/sched_clock.h>
@@ -48,7 +48,6 @@
#include <asm/system.h>
#include <mach/hardware.h>
-#include <asm/leds.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
@@ -34,9 +34,8 @@ config OMAP_DEBUG_DEVICES
For debug cards on TI reference boards.
config OMAP_DEBUG_LEDS
- bool
+ def_bool y if NEW_LEDS
depends on OMAP_DEBUG_DEVICES
- default y if LEDS_CLASS
config OMAP_SMARTREFLEX
bool "SmartReflex support"
@@ -1,6 +1,7 @@
/*
* linux/arch/arm/plat-omap/debug-leds.c
*
+ * Copyright 2011 by Bryan Wu <bryan.wu@canonical.com>
* Copyright 2003 by Texas Instruments Incorporated
*
* This program is free software; you can redistribute it and/or modify
@@ -8,274 +9,111 @@
* published by the Free Software Foundation.
*/
+#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <mach/hardware.h>
-#include <asm/leds.h>
#include <asm/system.h>
#include <asm/mach-types.h>
#include <plat/fpga.h>
-#include <mach/gpio.h>
-
/* Many OMAP development platforms reuse the same "debug board"; these
* platforms include H2, H3, H4, and Perseus2. There are 16 LEDs on the
* debug board (all green), accessed through FPGA registers.
- *
- * The "surfer" expansion board and H2 sample board also have two-color
- * green+red LEDs (in parallel), used here for timer and idle indicators
- * in preference to the ones on the debug board, for a "Disco LED" effect.
- *
- * This driver exports either the original ARM LED API, the new generic
- * one, or both.
- */
-
-static spinlock_t lock;
-static struct h2p2_dbg_fpga __iomem *fpga;
-static u16 led_state, hw_led_state;
-
-
-#ifdef CONFIG_OMAP_DEBUG_LEDS
-#define new_led_api() 1
-#else
-#define new_led_api() 0
-#endif
-
-
-/*-------------------------------------------------------------------------*/
-
-/* original ARM debug LED API:
- * - timer and idle leds (some boards use non-FPGA leds here);
- * - up to 4 generic leds, easily accessed in-kernel (any context)
*/
-#define GPIO_LED_RED 3
-#define GPIO_LED_GREEN OMAP_MPUIO(4)
-
-#define LED_STATE_ENABLED 0x01
-#define LED_STATE_CLAIMED 0x02
-#define LED_TIMER_ON 0x04
-
-#define GPIO_IDLE GPIO_LED_GREEN
-#define GPIO_TIMER GPIO_LED_RED
-
-static void h2p2_dbg_leds_event(led_event_t evt)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&lock, flags);
-
- if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
- goto done;
+static struct h2p2_dbg_fpga __iomem *fpga;
- switch (evt) {
- case led_start:
- if (fpga)
- led_state |= LED_STATE_ENABLED;
- break;
-
- case led_stop:
- case led_halted:
- /* all leds off during suspend or shutdown */
-
- if (!(machine_is_omap_perseus2() || machine_is_omap_h4())) {
- gpio_set_value(GPIO_TIMER, 0);
- gpio_set_value(GPIO_IDLE, 0);
- }
-
- __raw_writew(~0, &fpga->leds);
- led_state &= ~LED_STATE_ENABLED;
- goto done;
-
- case led_claim:
- led_state |= LED_STATE_CLAIMED;
- hw_led_state = 0;
- break;
-
- case led_release:
- led_state &= ~LED_STATE_CLAIMED;
- break;
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- led_state ^= LED_TIMER_ON;
-
- if (machine_is_omap_perseus2() || machine_is_omap_h4())
- hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER;
- else {
- gpio_set_value(GPIO_TIMER,
- led_state & LED_TIMER_ON);
- goto done;
- }
-
- break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
- /* LED lit iff busy */
- case led_idle_start:
- if (machine_is_omap_perseus2() || machine_is_omap_h4())
- hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE;
- else {
- gpio_set_value(GPIO_IDLE, 1);
- goto done;
- }
-
- break;
-
- case led_idle_end:
- if (machine_is_omap_perseus2() || machine_is_omap_h4())
- hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE;
- else {
- gpio_set_value(GPIO_IDLE, 0);
- goto done;
- }
-
- break;
-#endif
-
- case led_green_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_GREEN;
- break;
- case led_green_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_GREEN;
- break;
-
- case led_amber_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_AMBER;
- break;
- case led_amber_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_AMBER;
- break;
-
- case led_red_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_RED;
- break;
- case led_red_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_RED;
- break;
-
- case led_blue_on:
- hw_led_state |= H2P2_DBG_FPGA_LED_BLUE;
- break;
- case led_blue_off:
- hw_led_state &= ~H2P2_DBG_FPGA_LED_BLUE;
- break;
-
- default:
- break;
- }
-
-
- /*
- * Actually burn the LEDs
- */
- if (led_state & LED_STATE_ENABLED)
- __raw_writew(~hw_led_state, &fpga->leds);
-
-done:
- spin_unlock_irqrestore(&lock, flags);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* "new" LED API
- * - with syfs access and generic triggering
- * - not readily accessible to in-kernel drivers
- */
+static u16 fpga_led_state;
struct dbg_led {
struct led_classdev cdev;
u16 mask;
};
-static struct dbg_led dbg_leds[] = {
- /* REVISIT at least H2 uses different timer & cpu leds... */
-#ifndef CONFIG_LEDS_TIMER
- { .mask = 1 << 0, .cdev.name = "d4:green",
- .cdev.default_trigger = "heartbeat", },
-#endif
-#ifndef CONFIG_LEDS_CPU
- { .mask = 1 << 1, .cdev.name = "d5:green", }, /* !idle */
-#endif
- { .mask = 1 << 2, .cdev.name = "d6:green", },
- { .mask = 1 << 3, .cdev.name = "d7:green", },
-
- { .mask = 1 << 4, .cdev.name = "d8:green", },
- { .mask = 1 << 5, .cdev.name = "d9:green", },
- { .mask = 1 << 6, .cdev.name = "d10:green", },
- { .mask = 1 << 7, .cdev.name = "d11:green", },
-
- { .mask = 1 << 8, .cdev.name = "d12:green", },
- { .mask = 1 << 9, .cdev.name = "d13:green", },
- { .mask = 1 << 10, .cdev.name = "d14:green", },
- { .mask = 1 << 11, .cdev.name = "d15:green", },
-
-#ifndef CONFIG_LEDS
- { .mask = 1 << 12, .cdev.name = "d16:green", },
- { .mask = 1 << 13, .cdev.name = "d17:green", },
- { .mask = 1 << 14, .cdev.name = "d18:green", },
- { .mask = 1 << 15, .cdev.name = "d19:green", },
-#endif
+static const struct {
+ const char *name;
+ const char *trigger;
+} dbg_leds[] = {
+ { "dbg:d4", "heartbeat", },
+ { "dbg:d5", "cpu", },
+ { "dbg:d6", "default-on", },
+ { "dbg:d7", },
+ { "dbg:d8", },
+ { "dbg:d9", },
+ { "dbg:d10", },
+ { "dbg:d11", },
+ { "dbg:d12", },
+ { "dbg:d13", },
+ { "dbg:d14", },
+ { "dbg:d15", },
+ { "dbg:d16", },
+ { "dbg:d17", },
+ { "dbg:d18", },
+ { "dbg:d19", },
};
-static void
-fpga_led_set(struct led_classdev *cdev, enum led_brightness value)
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static void dbg_led_set(struct led_classdev *cdev,
+ enum led_brightness b)
{
- struct dbg_led *led = container_of(cdev, struct dbg_led, cdev);
- unsigned long flags;
+ struct dbg_led *led = container_of(cdev, struct dbg_led, cdev);
+ u16 reg;
- spin_lock_irqsave(&lock, flags);
- if (value == LED_OFF)
- hw_led_state &= ~led->mask;
+ reg = __raw_readw(&fpga->leds);
+ if (b != LED_OFF)
+ reg |= led->mask;
else
- hw_led_state |= led->mask;
- __raw_writew(~hw_led_state, &fpga->leds);
- spin_unlock_irqrestore(&lock, flags);
+ reg &= ~led->mask;
+ __raw_writew(reg, &fpga->leds);
}
-static void __init newled_init(struct device *dev)
+static enum led_brightness dbg_led_get(struct led_classdev *cdev)
{
- unsigned i;
- struct dbg_led *led;
- int status;
+ struct dbg_led *led = container_of(cdev, struct dbg_led, cdev);
+ u16 reg;
- for (i = 0, led = dbg_leds; i < ARRAY_SIZE(dbg_leds); i++, led++) {
- led->cdev.brightness_set = fpga_led_set;
- status = led_classdev_register(dev, &led->cdev);
- if (status < 0)
- break;
- }
- return;
+ reg = __raw_readw(&fpga->leds);
+ return (reg & led->mask) ? LED_FULL : LED_OFF;
}
-
-/*-------------------------------------------------------------------------*/
-
-static int /* __init */ fpga_probe(struct platform_device *pdev)
+static int fpga_probe(struct platform_device *pdev)
{
struct resource *iomem;
-
- spin_lock_init(&lock);
+ int i;
iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!iomem)
return -ENODEV;
fpga = ioremap(iomem->start, H2P2_DBG_FPGA_SIZE);
- __raw_writew(~0, &fpga->leds);
+ __raw_writew(0xff, &fpga->leds);
+
+ for (i = 0; i < ARRAY_SIZE(dbg_leds); i++) {
+ struct dbg_led *led;
+
+ led = kzalloc(sizeof(*led), GFP_KERNEL);
+ if (!led)
+ break;
-#ifdef CONFIG_LEDS
- leds_event = h2p2_dbg_leds_event;
- leds_event(led_start);
-#endif
+ led->cdev.name = dbg_leds[i].name;
+ led->cdev.brightness_set = dbg_led_set;
+ led->cdev.brightness_get = dbg_led_get;
+ led->cdev.default_trigger = dbg_leds[i].trigger;
+ led->mask = BIT(i);
- if (new_led_api()) {
- newled_init(&pdev->dev);
+ if (led_classdev_register(NULL, &led->cdev) < 0) {
+ kfree(led);
+ break;
+ }
}
return 0;
@@ -283,13 +121,15 @@ static int /* __init */ fpga_probe(struct platform_device *pdev)
static int fpga_suspend_noirq(struct device *dev)
{
- __raw_writew(~0, &fpga->leds);
+ fpga_led_state = __raw_readw(&fpga->leds);
+ __raw_writew(0xff, &fpga->leds);
+
return 0;
}
static int fpga_resume_noirq(struct device *dev)
{
- __raw_writew(~hw_led_state, &fpga->leds);
+ __raw_writew(~fpga_led_state, &fpga->leds);
return 0;
}