@@ -18,15 +18,10 @@
#include <linux/serial_reg.h>
-#include <asm/memory.h>
-
#include <mach/serial.h>
#define UART_SHIFT 2
-#define davinci_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET)
-#define davinci_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET)
-
.pushsection .data
davinci_uart_phys: .word 0
davinci_uart_virt: .word 0
@@ -35,37 +30,37 @@ davinci_uart_virt: .word 0
.macro addruart, rp, rv, tmp
/* Use davinci_uart_phys/virt if already configured */
-10: mrc p15, 0, \rp, c1, c0
- tst \rp, #1 @ MMU enabled?
- ldreq \rp, =davinci_uart_v2p(davinci_uart_phys)
- ldrne \rp, =davinci_uart_phys
- add \rv, \rp, #4 @ davinci_uart_virt
- ldr \rp, [\rp, #0]
- ldr \rv, [\rv, #0]
+10: adr \rp, 11f @ get effective addr of 11f
+ ldr \rv, [\rp] @ get absolute addr of 11f
+ sub \rv, \rv, \rp @ offset between the two
+ ldr \rp, [\rp, #4] @ abs addr of omap_uart_phys
+ sub \tmp, \rp, \rv @ make it effective
+ ldr \rp, [\tmp, #0] @ davinci_uart_phys
+ ldr \rv, [\tmp, #4] @ davinci_uart_virt
cmp \rp, #0 @ is port configured?
cmpne \rv, #0
bne 99f @ already configured
/* Check the debug UART address set in uncompress.h */
- mrc p15, 0, \rp, c1, c0
- tst \rp, #1 @ MMU enabled?
-
and \rp, pc, #0xff000000
ldr \rv, =DAVINCI_UART_INFO_OFS
add \rp, \rp, \rv
- ldreq \rv, =davinci_uart_v2p(davinci_uart_phys)
- ldrne \rv, =davinci_uart_phys
-
/* Copy uart phys address from decompressor uart info */
- ldr \tmp, [\rp, #0]
- str \tmp, [\rv, #0]
+ ldr \rv, [\rp, #0]
+ str \rv, [\tmp, #0]
/* Copy uart virt address from decompressor uart info */
- ldr \tmp, [\rp, #4]
- str \tmp, [\rv, #4]
+ ldr \rv, [\rp, #4]
+ str \rv, [\tmp, #4]
b 10b
+
+ .align
+11: .word .
+ .word davinci_uart_phys
+ .ltorg
+
99:
.endm
This achieves two goals: 1) Get rid of davinci_uart_v2p() and davinci_uart_p2v() which were the last users of PLAT_PHYS_OFFSET. 2) Remove the probing of the M bit in the CP15 control reg and make the access to the .data variables completely position independent. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> --- arch/arm/mach-davinci/include/mach/debug-macro.S | 39 +++++++++------------ 1 files changed, 17 insertions(+), 22 deletions(-)