diff mbox

[v6,4/7] ARM: dts: imx6q-sabrelite: add usb devices

Message ID 1342006425-21008-5-git-send-email-richard.zhao@freescale.com (mailing list archive)
State New, archived
Headers show

Commit Message

Richard Zhao July 11, 2012, 11:33 a.m. UTC 
- add usbphy devices
- add usb host controller and otg devices
- add on-board hub reset gpio pinctrl
- add usb h1 vbus regulator

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
---
 arch/arm/boot/dts/imx6q-sabrelite.dts |   28 +++++++++++++++++++++++++
 arch/arm/boot/dts/imx6q.dtsi          |   36 +++++++++++++++++++++++++++++++--
 2 files changed, 62 insertions(+), 2 deletions(-)

Comments

Shawn Guo July 12, 2012, 1:40 a.m. UTC | #1 
On Wed, Jul 11, 2012 at 07:33:42PM +0800, Richard Zhao wrote:
> - add usbphy devices
> - add usb host controller and otg devices
> - add on-board hub reset gpio pinctrl
> - add usb h1 vbus regulator
> 
> Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
> ---
>  arch/arm/boot/dts/imx6q-sabrelite.dts |   28 +++++++++++++++++++++++++
>  arch/arm/boot/dts/imx6q.dtsi          |   36 +++++++++++++++++++++++++++++++--
>  2 files changed, 62 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
> index e0ec929..5bba0d1 100644
> --- a/arch/arm/boot/dts/imx6q-sabrelite.dts
> +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
> @@ -41,10 +41,29 @@
>  					status = "okay";
>  				};
>  			};
> +			iomuxc@020e0000 {
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&pinctrl_gpio_hog>;
>  
> +				gpios {
> +					pinctrl_gpio_hog: gpiohog {
> +						fsl,pins = <1044 0x80000000	/* MX6Q_PAD_GPIO_17__GPIO_7_12 */

I guess this one is used for on-board hub reset.  Since you are using
it nowhere, please drop it for now.

Regards,
Shawn

> +							   144  0x80000000>;	/* MX6Q_PAD_EIM_D22__GPIO_3_22 */
> +					};
> +				};
> +			};
>  		};
diff mbox

Patch

diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index e0ec929..5bba0d1 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -41,10 +41,29 @@ 
 					status = "okay";
 				};
 			};
+			iomuxc@020e0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_gpio_hog>;
 
+				gpios {
+					pinctrl_gpio_hog: gpiohog {
+						fsl,pins = <1044 0x80000000	/* MX6Q_PAD_GPIO_17__GPIO_7_12 */
+							   144  0x80000000>;	/* MX6Q_PAD_EIM_D22__GPIO_3_22 */
+					};
+				};
+			};
 		};
 
 		aips-bus@02100000 { /* AIPS2 */
+			usb@02184000 { /* USB OTG */
+				vbus-supply = <&reg_usb_otg_vbus>;
+				status = "okay";
+			};
+
+			usb@02184200 { /* USB1 */
+				status = "okay";
+			};
+
 			ethernet@02188000 {
 				phy-mode = "rgmii";
 				phy-reset-gpios = <&gpio3 23 0>;
@@ -111,6 +130,15 @@ 
 			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
+
+		reg_usb_otg_vbus: usb_otg_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 0>;
+			enable-active-high;
+		};
 	};
 
 	sound {
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 16a3884..5e4f100 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -461,12 +461,14 @@ 
 				};
 			};
 
-			usbphy@020c9000 { /* USBPHY1 */
+			usbphy1: usbphy@020c9000 {
+				compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
 				reg = <0x020c9000 0x1000>;
 				interrupts = <0 44 0x04>;
 			};
 
-			usbphy@020ca000 { /* USBPHY2 */
+			usbphy2: usbphy@020ca000 {
+				compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
 				reg = <0x020ca000 0x1000>;
 				interrupts = <0 45 0x04>;
 			};
@@ -614,6 +616,36 @@ 
 				reg = <0x0217c000 0x4000>;
 			};
 
+			usb@02184000 { /* USB OTG */
+				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+				reg = <0x02184000 0x200>;
+				interrupts = <0 43 0x04>;
+				fsl,usbphy = <&usbphy1>;
+				status = "disabled";
+			};
+
+			usb@02184200 { /* USB1 */
+				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+				reg = <0x02184200 0x200>;
+				interrupts = <0 40 0x04>;
+				fsl,usbphy = <&usbphy2>;
+				status = "disabled";
+			};
+
+			usb@02184400 { /* USB2 */
+				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+				reg = <0x02184400 0x200>;
+				interrupts = <0 41 0x04>;
+				status = "disabled";
+			};
+
+			usb@02184600 { /* USB3 */
+				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
+				reg = <0x02184600 0x200>;
+				interrupts = <0 42 0x04>;
+				status = "disabled";
+			};
+
 			ethernet@02188000 {
 				compatible = "fsl,imx6q-fec";
 				reg = <0x02188000 0x4000>;