diff mbox

[2/5] marzen: add SDHI0 support

Message ID 1346833244-30432-3-git-send-email-horms@verge.net.au (mailing list archive)
State New, archived
Headers show

Commit Message

Simon Horman Sept. 5, 2012, 8:20 a.m. UTC 
From: Phil Edworthy <phil.edworthy@renesas.com>

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/configs/marzen_defconfig     |    4 +--
 arch/arm/mach-shmobile/board-marzen.c |   52 ++++++++++++++++++++++++++++++++-
 2 files changed, 53 insertions(+), 3 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig
index 864f9a5..bf42ad2 100644
--- a/arch/arm/configs/marzen_defconfig
+++ b/arch/arm/configs/marzen_defconfig
@@ -71,12 +71,12 @@  CONFIG_GPIO_SYSFS=y
 CONFIG_SSB=y
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_SDHI=y
 CONFIG_UIO=y
 CONFIG_UIO_PDRV_GENIRQ=y
 # CONFIG_IOMMU_SUPPORT is not set
 # CONFIG_FILE_LOCKING is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index 3a528cf..dec3ffc 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -30,6 +30,8 @@ 
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/smsc911x.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
+#include <linux/mfd/tmio.h>
 #include <mach/hardware.h>
 #include <mach/r8a7779.h>
 #include <mach/common.h>
@@ -39,6 +41,12 @@ 
 #include <asm/hardware/gic.h>
 #include <asm/traps.h>
 
+/* Fixed 3.3V regulator to be used by SDHI0 */
+static struct regulator_consumer_supply fixed3v3_power_consumers[] = {
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+};
+
 /* Dummy supplies, where voltage doesn't matter */
 static struct regulator_consumer_supply dummy_supplies[] = {
 	REGULATOR_SUPPLY("vddvario", "smsc911x"),
@@ -75,13 +83,45 @@  static struct platform_device eth_device = {
 	.num_resources	= ARRAY_SIZE(smsc911x_resources),
 };
 
+static struct resource sdhi0_resources[] = {
+	[0] = {
+		.name	= "sdhi0",
+		.start	= 0xffe4c000,
+		.end	= 0xffe4c0ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_spi(104),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_mobile_sdhi_info sdhi0_platform_data = {
+	.tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
+	.tmio_caps = MMC_CAP_SD_HIGHSPEED,
+};
+
+static struct platform_device sdhi0_device = {
+	.name = "sh_mobile_sdhi",
+	.num_resources = ARRAY_SIZE(sdhi0_resources),
+	.resource = sdhi0_resources,
+	.id = 0,
+	.dev = {
+		.platform_data = &sdhi0_platform_data,
+	}
+};
+
 static struct platform_device *marzen_devices[] __initdata = {
 	&eth_device,
+	&sdhi0_device,
 };
 
 static void __init marzen_init(void)
 {
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+	regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
+				ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+	regulator_register_fixed(0, dummy_supplies,
+				ARRAY_SIZE(dummy_supplies));
 
 	r8a7779_pinmux_init();
 
@@ -97,6 +137,16 @@  static void __init marzen_init(void)
 	gpio_request(GPIO_FN_EX_CS0, NULL); /* nCS */
 	gpio_request(GPIO_FN_IRQ1_B, NULL); /* IRQ + PME */
 
+	/* SD0 (CN20) */
+	gpio_request(GPIO_FN_SD0_CLK, NULL);
+	gpio_request(GPIO_FN_SD0_CMD, NULL);
+	gpio_request(GPIO_FN_SD0_DAT0, NULL);
+	gpio_request(GPIO_FN_SD0_DAT1, NULL);
+	gpio_request(GPIO_FN_SD0_DAT2, NULL);
+	gpio_request(GPIO_FN_SD0_DAT3, NULL);
+	gpio_request(GPIO_FN_SD0_CD, NULL);
+	gpio_request(GPIO_FN_SD0_WP, NULL);
+
 	r8a7779_add_standard_devices();
 	platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices));
 }