diff mbox

[v7] ARM: dts: imx6q-sabrelite: add usbmisc device

Message ID 1347604966-11956-1-git-send-email-richard.zhao@freescale.com (mailing list archive)
State New, archived
Headers show

Commit Message

Richard Zhao Sept. 14, 2012, 6:42 a.m. UTC 
- add usbmisc device
- set property fsl,usbmisc for usb controllers
- set disable-over-current for imx6q-sabrelite usb otg

Signed-off-by: Richard Zhao <richard.zhao@freescale.com>
---
Changes form v6:
 - include clk that describe using clk lookup dt binding

 arch/arm/boot/dts/imx6q-sabrelite.dts |    1 +
 arch/arm/boot/dts/imx6q.dtsi          |   11 +++++++++++
 2 files changed, 12 insertions(+)

Comments

Shawn Guo Sept. 17, 2012, 7:13 a.m. UTC | #1 
On Fri, Sep 14, 2012 at 02:42:45PM +0800, Richard Zhao wrote:
> - add usbmisc device
> - set property fsl,usbmisc for usb controllers
> - set disable-over-current for imx6q-sabrelite usb otg
> 
> Signed-off-by: Richard Zhao <richard.zhao@freescale.com>

Applied, thanks.
diff mbox

Patch

diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index cfdbe53..66fc765 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -63,6 +63,7 @@ 
 		aips-bus@02100000 { /* AIPS2 */
 			usb@02184000 { /* USB OTG */
 				vbus-supply = <&reg_usb_otg_vbus>;
+				disable-over-current;
 				status = "okay";
 			};
 
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 925da33..6b832d5 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -665,6 +665,7 @@ 
 				interrupts = <0 43 0x04>;
 				clocks = <&clks 162>;
 				fsl,usbphy = <&usbphy1>;
+				fsl,usbmisc = <&usbmisc 0>;
 				status = "disabled";
 			};
 
@@ -674,6 +675,7 @@ 
 				interrupts = <0 40 0x04>;
 				clocks = <&clks 162>;
 				fsl,usbphy = <&usbphy2>;
+				fsl,usbmisc = <&usbmisc 1>;
 				status = "disabled";
 			};
 
@@ -682,6 +684,7 @@ 
 				reg = <0x02184400 0x200>;
 				interrupts = <0 41 0x04>;
 				clocks = <&clks 162>;
+				fsl,usbmisc = <&usbmisc 2>;
 				status = "disabled";
 			};
 
@@ -690,9 +693,17 @@ 
 				reg = <0x02184600 0x200>;
 				interrupts = <0 42 0x04>;
 				clocks = <&clks 162>;
+				fsl,usbmisc = <&usbmisc 3>;
 				status = "disabled";
 			};
 
+			usbmisc: usbmisc@02184800 {
+				#index-cells = <1>;
+				compatible = "fsl,imx6q-usbmisc";
+				reg = <0x02184800 0x200>;
+				clocks = <&clks 162>;
+			};
+
 			ethernet@02188000 {
 				compatible = "fsl,imx6q-fec";
 				reg = <0x02188000 0x4000>;