From patchwork Fri Sep 14 15:18:42 2012 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Hunter, Jon" X-Patchwork-Id: 1459271 Return-Path: X-Original-To: patchwork-linux-arm@patchwork.kernel.org Delivered-To: patchwork-process-083081@patchwork2.kernel.org Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) by patchwork2.kernel.org (Postfix) with ESMTP id 65CEADF280 for ; Fri, 14 Sep 2012 15:23:23 +0000 (UTC) Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.76 #1 (Red Hat Linux)) id 1TCXfv-0002MW-GO; Fri, 14 Sep 2012 15:19:23 +0000 Received: from bear.ext.ti.com ([192.94.94.41]) by merlin.infradead.org with esmtps (Exim 4.76 #1 (Red Hat Linux)) id 1TCXfi-0002KO-0l for linux-arm-kernel@lists.infradead.org; Fri, 14 Sep 2012 15:19:11 +0000 Received: from dlelxv30.itg.ti.com ([172.17.2.17]) by bear.ext.ti.com (8.13.7/8.13.7) with ESMTP id q8EFIpCQ012275; Fri, 14 Sep 2012 10:18:51 -0500 Received: from DFLE72.ent.ti.com (dfle72.ent.ti.com [128.247.5.109]) by dlelxv30.itg.ti.com (8.13.8/8.13.8) with ESMTP id q8EFIpcO027870; Fri, 14 Sep 2012 10:18:51 -0500 Received: from dlelxv24.itg.ti.com (172.17.1.199) by dfle72.ent.ti.com (128.247.5.109) with Microsoft SMTP Server id 14.1.323.3; Fri, 14 Sep 2012 10:18:51 -0500 Received: from legion.dal.design.ti.com (legion.dal.design.ti.com [128.247.22.53]) by dlelxv24.itg.ti.com (8.13.8/8.13.8) with ESMTP id q8EFIpUR022672; Fri, 14 Sep 2012 10:18:51 -0500 Received: from localhost (h1-27.vpn.ti.com [172.24.1.27]) by legion.dal.design.ti.com (8.11.7p1+Sun/8.11.7) with ESMTP id q8EFInw11980; Fri, 14 Sep 2012 10:18:49 -0500 (CDT) From: Jon Hunter To: device-tree , linux-omap , linux-arm Subject: [PATCH V5 1/2] of: Add generic device tree DMA helpers Date: Fri, 14 Sep 2012 10:18:42 -0500 Message-ID: <1347635923-30166-2-git-send-email-jon-hunter@ti.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1347635923-30166-1-git-send-email-jon-hunter@ti.com> References: <1347635923-30166-1-git-send-email-jon-hunter@ti.com> MIME-Version: 1.0 X-Spam-Note: CRM114 invocation failed X-Spam-Score: -7.4 (-------) X-Spam-Report: SpamAssassin version 3.3.2 on merlin.infradead.org summary: Content analysis details: (-7.4 points) pts rule name description ---- ---------------------- -------------------------------------------------- -5.0 RCVD_IN_DNSWL_HI RBL: Sender listed at http://www.dnswl.org/, high trust [192.94.94.41 listed in list.dnswl.org] -0.0 SPF_PASS SPF: sender matches SPF record -0.5 RP_MATCHES_RCVD Envelope sender domain matches handover relay domain -1.9 BAYES_00 BODY: Bayes spam probability is 0 to 1% [score: 0.0000] Cc: Stephen Warren , Benoit Cousson , Arnd Bergmann , Vinod Koul , Nicolas Ferre , Rob Herring , Grant Likely , Jon Hunter , Dan Williams , Russell King X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linux-arm-kernel-bounces@lists.infradead.org Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org This is based upon the work by Benoit Cousson [1] and Nicolas Ferre [2] to add some basic helpers to retrieve a DMA controller device_node and the DMA request/channel information. Aim of DMA helpers - The purpose of device-tree is to describe the capabilites of the hardware. Thinking about DMA controllers purely from the context of the hardware to begin with, we can describe a device in terms of a DMA controller as follows ... 1. Number of DMA controllers 2. Number of channels (maybe physical or logical) 3. Mapping of DMA requests signals to DMA controller 4. Number of DMA interrupts 5. Mapping of DMA interrupts to channels - With the above in mind the aim of the DT DMA helper functions is to extract the above information from the DT and provide to the appropriate driver. However, due to the vast number of DMA controllers and not all are using a common driver (such as DMA Engine) it has been seen that this is not a trivial task. In previous discussions on this topic the following concerns have been raised ... 1. How does the binding support devices with multiple DMA controllers? 2. How to support both legacy DMA controllers not using DMA Engine as well as those that support DMA Engine. 3. When using with DMA Engine how do we support the various implementations where the opaque filter function parameter differs between implementations? 4. How do we handle DMA channels that are identified with a string versus a integer? - Hence the design of the DMA helpers has to accomodate the above or align on an agreement what can be or should be supported. Design of DMA helpers 1. Registering DMA controllers In the case of DMA controllers that are using DMA Engine, requesting a channel is performed by calling the following function. struct dma_chan *dma_request_channel(dma_cap_mask_t mask, dma_filter_fn filter_fn, void *filter_param); The mask variable is used to match a type of the device controller in a list of controllers. The filter_fn and filter_param are used to identify the required dma channel and return a handle to the dma channel of type dma_chan. From the examples I have seen, the mask and filter_fn are constant for a given DMA controller and therefore, we can specify these as controller specific data when registering the DMA controller with the device-tree DMA helpers. The filter_param variable is of an unknown type and is typically specific to the DMA engine implementation for a given DMA controller. To allow some flexibility in the type and formating of this filter_param we employ an xlate to translate the device-tree binding information into the appropriate format. The xlate function used for a DMA controller can also be specified when registering the DMA controller with the device-tree DMA helpers. Based upon the above, a function for registering the DMA controller with the DMA helpers now looks like the below. The data variable is used to pass a pointer to DMA controller specific data used by the xlate function. int of_dma_controller_register(struct device_node *np, struct dma_chan *(*of_dma_xlate) (struct of_phandle_args *, struct of_dma *), void *data) For example, in the case where DMA engine is used, we define the following structure (that stores the DMA engine capability mask and filter function) and pass this to the data variable in the above function. struct of_dma_filter_info { dma_cap_mask_t dma_cap; dma_filter_fn filter_fn; }; 2. Representing and requesting channel information Please see the dma binding documentation included in this patch for a description of how DMA controllers and client information should be represented with device-tree. For more information on how this binding came about please see [3]. In addition to this, feedback received from the Linux kernel summit showed a consensus (among those who attended) to use a name to identify DMA client information [4]. A DMA channel can be requested by calling the following function, where name is a required parameter used for identifying a DMA channel. This function has been designed to return a structure of type dma_chan to work with the DMA engine driver. Note that if DMA engine is used then drivers should be using the DMA engine API dma_request_slave_channel() (implemented in part 2 of this series, "dmaengine: add helper function to request a slave DMA channel") which will in turn call the below function if device-tree is present. The aim being to have a common DMA engine interface regardless of whether device tree is being used. struct dma_chan *of_dma_request_slave_channel(struct device_node *np, char *name) 3. Supporting legacy devices not using DMA Engine These devices present a problem, as there may not be a uniform way to easily support them with regard to device tree. Ideally, these should be migrated to DMA engine. However, if this is not possible, then they should still be able to use this binding, the only constaint imposed by this implementation is that when requesting a DMA channel via of_dma_request_slave_channel(), it will return a type of dma_chan. This implementation has been tested on OMAP4430 using the kernel v3.6-rc5. I have validated that MMC is working on the PANDA board with this implementation. My development branch for testing on OMAP can be found here [5]. v5: - minor update to binding documentation - added loop to exhaustively search for a slave channel in the case where there could be alternative channels available v4: - revert the removal of xlate function from v3 - update the proposed binding format and APIs based upon discussions [3] v3: - avoid passing an xlate function and instead pass DMA engine parameters - define number of dma channels and requests in dma-controller node v2: - remove of_dma_to_resource API - make property #dma-cells required (no fallback anymore) - another check in of_dma_xlate_onenumbercell() function [1] http://article.gmane.org/gmane.linux.drivers.devicetree/12022 [2] http://article.gmane.org/gmane.linux.ports.arm.omap/73622 [3] http://marc.info/?l=linux-omap&m=133582085008539&w=2 [4] http://pad.linaro.org/arm-mini-summit-2012 [5] https://github.com/jonhunter/linux/tree/dev-dt-dma Cc: Nicolas Ferre Cc: Benoit Cousson Cc: Stephen Warren Cc: Grant Likely Cc: Russell King Cc: Rob Herring Cc: Arnd Bergmann Cc: Vinod Koul Cc: Dan Williams Signed-off-by: Jon Hunter Reviewed-by: Arnd Bergmann Reviewed-by: Nicolas Ferre --- Documentation/devicetree/bindings/dma/dma.txt | 80 +++++++++ drivers/of/Makefile | 2 +- drivers/of/dma.c | 219 +++++++++++++++++++++++++ include/linux/of_dma.h | 45 +++++ 4 files changed, 345 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/dma/dma.txt create mode 100644 drivers/of/dma.c create mode 100644 include/linux/of_dma.h diff --git a/Documentation/devicetree/bindings/dma/dma.txt b/Documentation/devicetree/bindings/dma/dma.txt new file mode 100644 index 0000000..c5f8430 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/dma.txt @@ -0,0 +1,80 @@ +* Generic DMA Controller and DMA request bindings + +Generic binding to provide a way for a driver using DMA Engine to retrieve the +DMA request or channel information that goes from a hardware device to a DMA +controller. + + +* DMA controller + +Required property: +- #dma-cells: Must be at least 1. Used to provide DMA controller + specific information. See DMA client binding below for + more details. + +Optional properties: +- #dma-channels: Number of DMA channels supported by the controller. +- #dma-requests: Number of DMA requests signals supported by the + controller. + +Example: + + dma: dma@48000000 { + compatible = "ti,omap-sdma" + reg = <0x48000000 0x1000>; + interrupts = <0 12 0x4 + 0 13 0x4 + 0 14 0x4 + 0 15 0x4>; + #dma-cells = <1>; + #dma-channels = <32>; + #dma-requests = <127>; + }; + + +* DMA client + +Client drivers should specify the DMA property using a phandle to the controller +followed by DMA controller specific data. + +Required property: +- dmas: List of one or more DMA specifiers, each consisting of + - A phandle pointing to DMA controller node + - A single integer cell containing DMA controller + specific information. This typically contains a dma + request line number or a channel number, but can + contain any data that is used required for configuring + a channel. +- dma-names: Contains one identifier string for each DMA specifier in + the dmas property. The specific strings that can be used + are defined in the binding of the DMA client device. + Multiple DMA specifiers can be used to represent + alternatives and in this case the dma-names for those + DMA specifiers must be identical (see examples). + +Examples: + +1. A device with one DMA read channel, one DMA write channel: + + i2c1: i2c@1 { + ... + dmas = <&dma 2 /* read channel */ + &dma 3>; /* write channel */ + dma-names = "rx", "tx" + ... + }; + +2. A single read-write channel with two alternative dma controllers: + + dmas = <&dma1 5 + &dma2 7 + &dma3 2>; + dma-names = "rx-tx", "rx-tx", "rx-tx" + +3. A device with three channels, one of which has two alternatives: + + dmas = <&dma1 2 /* read channel */ + &dma1 3 /* write channel */ + &dma2 0 /* error read */ + &dma3 0>; /* alternative error read */ + dma-names = "rx", "tx", "error", "error"; diff --git a/drivers/of/Makefile b/drivers/of/Makefile index e027f44..eafa107 100644 --- a/drivers/of/Makefile +++ b/drivers/of/Makefile @@ -1,4 +1,4 @@ -obj-y = base.o +obj-y = base.o dma.o obj-$(CONFIG_OF_FLATTREE) += fdt.o obj-$(CONFIG_OF_PROMTREE) += pdt.o obj-$(CONFIG_OF_ADDRESS) += address.o diff --git a/drivers/of/dma.c b/drivers/of/dma.c new file mode 100644 index 0000000..19ad37c --- /dev/null +++ b/drivers/of/dma.c @@ -0,0 +1,219 @@ +/* + * Device tree helpers for DMA request / controller + * + * Based on of_gpio.c + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +static LIST_HEAD(of_dma_list); + +/** + * of_dma_find_controller - Find a DMA controller in DT DMA helpers list + * @np: device node of DMA controller + */ +static struct of_dma *of_dma_find_controller(struct device_node *np) +{ + struct of_dma *ofdma; + + if (list_empty(&of_dma_list)) { + pr_err("empty DMA controller list\n"); + return NULL; + } + + list_for_each_entry_rcu(ofdma, &of_dma_list, of_dma_controllers) + if (ofdma->of_node == np) + return ofdma; + + return NULL; +} + +/** + * of_dma_controller_register - Register a DMA controller to DT DMA helpers + * @np: device node of DMA controller + * @of_dma_xlate: translation function which converts a phandle + * arguments list into a dma_chan structure + * @data pointer to controller specific data to be used by + * translation function + * + * Returns 0 on success or appropriate errno value on error. + * + * Allocated memory should be freed with appropriate of_dma_controller_free() + * call. + */ +int of_dma_controller_register(struct device_node *np, + struct dma_chan *(*of_dma_xlate) + (struct of_phandle_args *, struct of_dma *), + void *data) +{ + struct of_dma *ofdma; + int nbcells; + + if (!np || !of_dma_xlate) { + pr_err("%s: not enough information provided\n", __func__); + return -EINVAL; + } + + ofdma = kzalloc(sizeof(*ofdma), GFP_KERNEL); + if (!ofdma) + return -ENOMEM; + + nbcells = be32_to_cpup(of_get_property(np, "#dma-cells", NULL)); + if (!nbcells) { + pr_err("%s: #dma-cells property is missing or invalid\n", + __func__); + return -EINVAL; + } + + ofdma->of_node = np; + ofdma->of_dma_nbcells = nbcells; + ofdma->of_dma_xlate = of_dma_xlate; + ofdma->of_dma_data = data; + + /* Now queue of_dma controller structure in list */ + list_add_tail_rcu(&ofdma->of_dma_controllers, &of_dma_list); + + return 0; +} +EXPORT_SYMBOL_GPL(of_dma_controller_register); + +/** + * of_dma_controller_free - Remove a DMA controller from DT DMA helpers list + * @np: device node of DMA controller + * + * Memory allocated by of_dma_controller_register() is freed here. + */ +void of_dma_controller_free(struct device_node *np) +{ + struct of_dma *ofdma; + + ofdma = of_dma_find_controller(np); + if (ofdma) { + list_del_rcu(&ofdma->of_dma_controllers); + kfree(ofdma); + } +} +EXPORT_SYMBOL_GPL(of_dma_controller_free); + +/** + * of_dma_find_channel - Find a DMA channel by name + * @np: device node to look for DMA channels + * @name: name of desired channel + * @dma_spec: pointer to DMA specifier as found in the device tree + * + * Find a DMA channel by the name. Returns 0 on success or appropriate + * errno value on error. + */ +static int of_dma_find_channel(struct device_node *np, char *name, + struct of_phandle_args *dma_spec) +{ + int count, i; + const char *s; + + count = of_property_count_strings(np, "dma-names"); + if (count < 0) + return count; + + for (i = 0; i < count; i++) { + if (of_property_read_string_index(np, "dma-names", i, &s)) + continue; + + if (strcmp(name, s)) + continue; + + if (!of_parse_phandle_with_args(np, "dmas", "#dma-cells", i, + dma_spec)) + return 0; + } + + return -ENODEV; +} + +/** + * of_dma_request_slave_channel - Get the DMA slave channel + * @np: device node to get DMA request from + * @name: name of desired channel + * + * Returns pointer to appropriate dma channel on success or NULL on error. + */ +struct dma_chan *of_dma_request_slave_channel(struct device_node *np, + char *name) +{ + struct of_phandle_args dma_spec; + struct of_dma *ofdma; + struct dma_chan *chan; + int r; + + if (!np || !name) { + pr_err("%s: not enough information provided\n", __func__); + return NULL; + } + + do { + r = of_dma_find_channel(np, name, &dma_spec); + if (r) { + pr_err("%s: can't find DMA channel\n", np->full_name); + return NULL; + } + + ofdma = of_dma_find_controller(dma_spec.np); + if (!ofdma) { + pr_debug("%s: can't find DMA controller %s\n", + np->full_name, dma_spec.np->full_name); + continue; + } + + if (dma_spec.args_count != ofdma->of_dma_nbcells) { + pr_debug("%s: wrong #dma-cells for %s\n", np->full_name, + dma_spec.np->full_name); + continue; + } + + chan = ofdma->of_dma_xlate(&dma_spec, ofdma); + + of_node_put(dma_spec.np); + + } while (!chan); + + return chan; +} + +/** + * of_dma_simple_xlate - Simple DMA engine translation function + * @dma_spec: pointer to DMA specifier as found in the device tree + * @of_dma: pointer to DMA controller data + * + * A simple translation function for devices that use a 32-bit value for the + * filter_param when calling the DMA engine dma_request_channel() function. + * Note that this translation function requires that #dma-cells is equal to 1 + * and the argument of the dma specifier is the 32-bit filter_param. Returns + * pointer to appropriate dma channel on success or NULL on error. + */ +struct dma_chan *of_dma_simple_xlate(struct of_phandle_args *dma_spec, + struct of_dma *ofdma) +{ + int count = dma_spec->args_count; + struct of_dma_filter_info *info = ofdma->of_dma_data; + + if (!info || !info->filter_fn) + return NULL; + + if (count != 1) + return NULL; + + return dma_request_channel(info->dma_cap, info->filter_fn, + &dma_spec->args[0]); +} +EXPORT_SYMBOL_GPL(of_dma_simple_xlate); diff --git a/include/linux/of_dma.h b/include/linux/of_dma.h new file mode 100644 index 0000000..337823d --- /dev/null +++ b/include/linux/of_dma.h @@ -0,0 +1,45 @@ +/* + * OF helpers for DMA request / controller + * + * Based on of_gpio.h + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __LINUX_OF_DMA_H +#define __LINUX_OF_DMA_H + +#include +#include + +struct device_node; + +struct of_dma { + struct list_head of_dma_controllers; + struct device_node *of_node; + int of_dma_nbcells; + struct dma_chan *(*of_dma_xlate) + (struct of_phandle_args *, struct of_dma *); + void *of_dma_data; +}; + +struct of_dma_filter_info { + dma_cap_mask_t dma_cap; + dma_filter_fn filter_fn; +}; + +extern int of_dma_controller_register(struct device_node *np, + struct dma_chan *(*of_dma_xlate) + (struct of_phandle_args *, struct of_dma *), + void *data); +extern void of_dma_controller_free(struct device_node *np); +extern struct dma_chan *of_dma_request_slave_channel(struct device_node *np, + char *name); +extern struct dma_chan *of_dma_simple_xlate(struct of_phandle_args *dma_spec, + struct of_dma *ofdma); + +#endif /* __LINUX_OF_DMA_H */