diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index b1c945f..a3d7132 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -111,6 +111,101 @@
 				      >;
 
 				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<1 14 0x1 0x0	/* PB14 periph A */
+							 1 15 0x1 0x1>;	/* PB15 periph with pullup */
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<1 4 0x1 0x0	/* PB4 periph A */
+							 1 5 0x1 0x0>;	/* PB5 periph A */
+					};
+
+					pinctrl_uart0_rts_cts: uart0_rts_cts-0 {
+						atmel,pins =
+							<1 26 0x1 0x0	/* PB26 periph A */
+							 1 27 0x1 0x0>;	/* PB27 periph A */
+					};
+
+					pinctrl_uart0_dtr_dsr: uart0_dtr_dsr-0 {
+						atmel,pins =
+							<1 24 0x1 0x0	/* PB24 periph A */
+							 1 22 0x1 0x0>;	/* PB22 periph A */
+					};
+
+					pinctrl_uart0_dcd: uart0_dcd-0 {
+						atmel,pins =
+							<1 23 0x1 0x0>;	/* PB23 periph A */
+					};
+
+					pinctrl_uart0_ri: uart0_ri-0 {
+						atmel,pins =
+							<1 25 0x1 0x0>;	/* PB25 periph A */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<2 6 0x1 0x1	/* PB6 periph A with pullup */
+							 2 7 0x1 0x0>;	/* PB7 periph A */
+					};
+
+					pinctrl_uart1_rts_cts: uart1_rts_cts-0 {
+						atmel,pins =
+							<1 28 0x1 0x0	/* PB28 periph A */
+							 1 29 0x1 0x0>;	/* PB29 periph A */
+					};
+				};
+
+				uart2 {
+					pinctrl_uart2: uart2-0 {
+						atmel,pins =
+							<1 8 0x1 0x1	/* PB8 periph A with pullup */
+							 1 9 0x1 0x0>;	/* PB9 periph A */
+					};
+
+					pinctrl_uart2_rts_cts: uart2_rts_cts-0 {
+						atmel,pins =
+							<0 4 0x1 0x0	/* PA4 periph A */
+							 0 5 0x1 0x0>;	/* PA5 periph A */
+					};
+				};
+
+				uart3 {
+					pinctrl_uart3: uart3-0 {
+						atmel,pins =
+							<2 10 0x1 0x1	/* PB10 periph A with pullup */
+							 2 11 0x1 0x0>;	/* PB11 periph A */
+					};
+
+					pinctrl_uart3_rts_cts: uart3_rts_cts-0 {
+						atmel,pins =
+							<3 8 0x2 0x0	/* PB8 periph B */
+							 3 10 0x2 0x0>;	/* PB10 periph B */
+					};
+				};
+
+				uart4 {
+					pinctrl_uart4: uart4-0 {
+						atmel,pins =
+							<0 31 0x2 0x1	/* PA31 periph B with pullup */
+							 0 30 0x2 0x0>;	/* PA30 periph B */
+					};
+				};
+
+				uart5 {
+					pinctrl_uart5: uart5-0 {
+						atmel,pins =
+							<2 12 0x1 0x1	/* PB12 periph A with pullup */
+							 2 13 0x1 0x0>;	/* PB13 periph A */
+					};
+				};
 
 				pioA: gpio@fffff400 {
 					compatible = "atmel,at91rm9200-gpio";
@@ -147,6 +242,8 @@
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
 				interrupts = <1 4 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
 				status = "disabled";
 			};
 
@@ -156,6 +253,8 @@
 				interrupts = <6 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
 				status = "disabled";
 			};
 
@@ -165,6 +264,8 @@
 				interrupts = <7 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
 				status = "disabled";
 			};
 
@@ -174,6 +275,8 @@
 				interrupts = <8 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart2>;
 				status = "disabled";
 			};
 
@@ -183,6 +286,8 @@
 				interrupts = <23 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart3>;
 				status = "disabled";
 			};
 
@@ -192,6 +297,8 @@
 				interrupts = <24 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart4>;
 				status = "disabled";
 			};
 
@@ -201,6 +308,8 @@
 				interrupts = <25 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart5>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 4307f02..8bc4ce7 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -104,6 +104,55 @@
 				      >;
 
 				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<2 30 0x1 0x0	/* PC30 periph A */
+							 2 31 0x1 0x1>;	/* PC31 periph with pullup */
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<0 26 0x1 0x1	/* PA26 periph A with pullup */
+							 0 27 0x1 0x0>;	/* PA27 periph A */
+					};
+
+					pinctrl_uart0_rts_cts: uart0_rts_cts-0 {
+						atmel,pins =
+							<0 28 0x1 0x0	/* PA28 periph A */
+							 0 29 0x1 0x0>;	/* PA29 periph A */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<3 0 0x1 0x1	/* PD0 periph A with pullup */
+							 3 1 0x1 0x0>;	/* PD1 periph A */
+					};
+
+					pinctrl_uart1_rts_cts: uart1_rts_cts-0 {
+						atmel,pins =
+							<3 7 0x2 0x0	/* PD7 periph B */
+							 3 8 0x2 0x0>;	/* PD8 periph B */
+					};
+				};
+
+				uart2 {
+					pinctrl_uart2: uart2-0 {
+						atmel,pins =
+							<3 2 0x1 0x1	/* PD2 periph A with pullup */
+							 3 3 0x1 0x0>;	/* PD3 periph A */
+					};
+
+					pinctrl_uart2_rts_cts: uart2_rts_cts-0 {
+						atmel,pins =
+							<3 5 0x2 0x0	/* PD5 periph B */
+							 4 6 0x2 0x0>;	/* PD6 periph B */
+					};
+				};
 
 				pioA: gpio@fffff200 {
 					compatible = "atmel,at91rm9200-gpio";
@@ -160,6 +209,8 @@
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xffffee00 0x200>;
 				interrupts = <1 4 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
 				status = "disabled";
 			};
 
@@ -169,6 +220,8 @@
 				interrupts = <7 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
 				status = "disabled";
 			};
 
@@ -178,6 +231,8 @@
 				interrupts = <8 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
 				status = "disabled";
 			};
 
@@ -187,6 +242,8 @@
 				interrupts = <9 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart2>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/at91sam9g15.dtsi b/arch/arm/boot/dts/at91sam9g15.dtsi
new file mode 100644
index 0000000..fbe7a70
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g15.dtsi
@@ -0,0 +1,28 @@
+/*
+ * at91sam9g15.dtsi - Device Tree Include file for AT91SAM9G15 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+/include/ "at91sam9x5.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G15 SoC";
+	compatible = "atmel, at91sam9g15, atmel,at91sam9x5";
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				atmel,mux-mask = <
+				      /*    A         B          C     */
+				       0xffffffff 0xffe0399f 0x00000000  /* pioA */
+				       0x00040000 0x00047e3f 0x00000000  /* pioB */
+				       0xfdffffff 0x00000000 0xb83fffff  /* pioC */
+				       0x003fffff 0x003f8000 0x00000000  /* pioD */
+				      >;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9g15ek.dts b/arch/arm/boot/dts/at91sam9g15ek.dts
new file mode 100644
index 0000000..86dd3f6
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g15ek.dts
@@ -0,0 +1,16 @@
+/*
+ * at91sam9g15ek.dts - Device Tree file for AT91SAM9G15-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9g15.dtsi"
+/include/ "at91sam9x5ek.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G25-EK";
+	compatible = "atmel,at91sam9g15ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+};
diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi
new file mode 100644
index 0000000..05a718f
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g25.dtsi
@@ -0,0 +1,28 @@
+/*
+ * at91sam9g25.dtsi - Device Tree Include file for AT91SAM9G25 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+/include/ "at91sam9x5.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G25 SoC";
+	compatible = "atmel, at91sam9g25, atmel,at91sam9x5";
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				atmel,mux-mask = <
+				      /*    A         B          C     */
+				       0xffffffff 0xffe0399f 0xc000001c  /* pioA */
+				       0x0007ffff 0x8000fe3f 0x00000000  /* pioB */
+				       0x80000000 0x07c0ffff 0xb83fffff  /* pioC */
+				       0x003fffff 0x003f8000 0x00000000  /* pioD */
+				      >;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts
dissimilarity index 62%
index 7829a4d..c5ab16f 100644
--- a/arch/arm/boot/dts/at91sam9g25ek.dts
+++ b/arch/arm/boot/dts/at91sam9g25ek.dts
@@ -1,49 +1,16 @@
-/*
- * at91sam9g25ek.dts - Device Tree file for AT91SAM9G25-EK board
- *
- *  Copyright (C) 2012 Atmel,
- *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
- */
-/dts-v1/;
-/include/ "at91sam9x5.dtsi"
-/include/ "at91sam9x5cm.dtsi"
-
-/ {
-	model = "Atmel AT91SAM9G25-EK";
-	compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
-	};
-
-	ahb {
-		apb {
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			usart0: serial@f801c000 {
-				status = "okay";
-			};
-
-			macb0: ethernet@f802c000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-		};
-
-		usb0: ohci@00600000 {
-			status = "okay";
-			num-ports = <2>;
-			atmel,vbus-gpio = <&pioD 19 1
-					   &pioD 20 1
-					  >;
-		};
-
-		usb1: ehci@00700000 {
-			status = "okay";
-		};
-	};
-};
+/*
+ * at91sam9g25ek.dts - Device Tree file for AT91SAM9G25-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9g25.dtsi"
+/include/ "at91sam9x5ek.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G25-EK";
+	compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+};
diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi
new file mode 100644
index 0000000..f9d14a7
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g35.dtsi
@@ -0,0 +1,28 @@
+/*
+ * at91sam9g35.dtsi - Device Tree Include file for AT91SAM9G35 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+/include/ "at91sam9x5.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G35 SoC";
+	compatible = "atmel, at91sam9g35, atmel,at91sam9x5";
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				atmel,mux-mask = <
+				      /*    A         B          C     */
+				       0xffffffff 0xffe0399f 0xc000000c  /* pioA */
+				       0x000406ff 0x00047e3f 0x00000000  /* pioB */
+				       0xfdffffff 0x00000000 0xb83fffff  /* pioC */
+				       0x003fffff 0x003f8000 0x00000000  /* pioD */
+				      >;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9g35ek.dts b/arch/arm/boot/dts/at91sam9g35ek.dts
new file mode 100644
index 0000000..95944bd
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g35ek.dts
@@ -0,0 +1,16 @@
+/*
+ * at91sam9g35ek.dts - Device Tree file for AT91SAM9G35-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9g35.dtsi"
+/include/ "at91sam9x5ek.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G35-EK";
+	compatible = "atmel,at91sam9g35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+};
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 57ae4c3..301458e 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -122,6 +122,69 @@
 				      >;
 
 				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<1 12 0x1 0x0	/* PB12 periph A */
+							 1 13 0x1 0x0>;	/* PB13 periph A */
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<1 19 0x1 0x1	/* PB19 periph A with pullup */
+							 1 18 0x1 0x0>;	/* PB18 periph A */
+					};
+
+					pinctrl_uart0_rts_cts: uart0_rts_cts-0 {
+						atmel,pins =
+							<1 17 0x2 0x0	/* PB17 periph B */
+							 1 15 0x2 0x0>;	/* PB15 periph B */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<1 4 0x1 0x1	/* PB4 periph A with pullup */
+							 1 5 0x1 0x0>;	/* PB5 periph A */
+					};
+
+					pinctrl_uart1_rts_cts: uart1_rts_cts-0 {
+						atmel,pins =
+							<3 16 0x1 0x0	/* PD16 periph A */
+							 3 17 0x1 0x0>;	/* PD17 periph A */
+					};
+				};
+
+				uart2 {
+					pinctrl_uart2: uart2-0 {
+						atmel,pins =
+							<1 6 0x1 0x1	/* PB6 periph A with pullup */
+							 1 7 0x1 0x0>;	/* PB7 periph A */
+					};
+
+					pinctrl_uart2_rts_cts: uart2_rts_cts-0 {
+						atmel,pins =
+							<2 9 0x2 0x0	/* PC9 periph B */
+							 2 11 0x2 0x0>;	/* PC11 periph B */
+					};
+				};
+
+				uart3 {
+					pinctrl_uart3: uart3-0 {
+						atmel,pins =
+							<1 8 0x1 0x1	/* PB9 periph A with pullup */
+							 1 9 0x1 0x0>;	/* PB8 periph A */
+					};
+
+					pinctrl_uart3_rts_cts: uart3_rts_cts-0 {
+						atmel,pins =
+							<0 23 0x2 0x0	/* PA23 periph B */
+							 0 24 0x2 0x0>;	/* PA24 periph B */
+					};
+				};
 
 				pioA: gpio@fffff200 {
 					compatible = "atmel,at91rm9200-gpio";
@@ -178,6 +241,8 @@
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xffffee00 0x200>;
 				interrupts = <1 4 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
 				status = "disabled";
 			};
 
@@ -187,6 +252,8 @@
 				interrupts = <7 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
 				status = "disabled";
 			};
 
@@ -196,6 +263,8 @@
 				interrupts = <8 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
 				status = "disabled";
 			};
 
@@ -205,6 +274,8 @@
 				interrupts = <9 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart2>;
 				status = "disabled";
 			};
 
@@ -214,6 +285,8 @@
 				interrupts = <10 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart3>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index a2d6201..699b2f3 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -115,6 +115,79 @@
 				      >;
 
 				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<0 9 0x1 0x0	/* PA9 periph A */
+							 0 10 0x1 0x1>;	/* PA10 periph with pullup */
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<0 1 0x1 0x1	/* PA1 periph A with pullup */
+							 0 0 0x1 0x0>;	/* PA0 periph A */
+					};
+
+					pinctrl_uart0_rts_cts: uart0_rts_cts-0 {
+						atmel,pins =
+							<0 2 0x1 0x0	/* PA2 periph A */
+							 0 3 0x1 0x0>;	/* PA3 periph A */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<0 6 0x1 0x1	/* PA6 periph A with pullup */
+							 0 5 0x1 0x0>;	/* PA5 periph A */
+					};
+				};
+
+				uart2 {
+					pinctrl_uart2: uart2-0 {
+						atmel,pins =
+							<0 8 0x1 0x1	/* PA8 periph A with pullup */
+							 0 7 0x1 0x0>;	/* PA7 periph A */
+					};
+
+					pinctrl_uart2_rts_cts: uart2_rts_cts-0 {
+						atmel,pins =
+							<1 0 0x2 0x0	/* PB0 periph B */
+							 1 1 0x2 0x0>;	/* PB1 periph B */
+					};
+				};
+
+				uart3 {
+					pinctrl_uart3: uart3-0 {
+						atmel,pins =
+							<2 23 0x2 0x1	/* PC23 periph B with pullup */
+							 2 22 0x2 0x0>;	/* PC22 periph B */
+					};
+
+					pinctrl_uart3_rts_cts: uart3_rts_cts-0 {
+						atmel,pins =
+							<2 24 0x2 0x0	/* PC24 periph B */
+							 2 25 0x2 0x0>;	/* PC25 periph B */
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<2 9 0x3 0x1	/* PC9 periph C with pullup */
+							 2 8 0x3 0x0>;	/* PC8 periph C */
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<2 16 0x3 0x1	/* PC17 periph C with pullup */
+							 2 17 0x3 0x0>;	/* PC16 periph C */
+					};
+				};
 
 				pioA: gpio@fffff400 {
 					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
@@ -161,6 +234,8 @@
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
 				interrupts = <1 4 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
 				status = "disabled";
 			};
 
@@ -170,6 +245,8 @@
 				interrupts = <5 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
 				status = "disabled";
 			};
 
@@ -179,6 +256,8 @@
 				interrupts = <6 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
 				status = "disabled";
 			};
 
@@ -188,6 +267,8 @@
 				interrupts = <7 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart2>;
 				status = "disabled";
 			};
 
@@ -197,6 +278,8 @@
 				interrupts = <8 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart3>;
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi
new file mode 100644
index 0000000..956c65f
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x25.dtsi
@@ -0,0 +1,28 @@
+/*
+ * at91sam9x25.dtsi - Device Tree Include file for AT91SAM9X25 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+/include/ "at91sam9x5.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9X25 SoC";
+	compatible = "atmel, at91sam9x25, atmel,at91sam9x5";
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				atmel,mux-mask = <
+				      /*    A         B          C     */
+				       0xffffffff 0xffe03fff 0xc000001c  /* pioA */
+				       0x0007ffff 0x00047e3f 0x00000000  /* pioB */
+				       0x80000000 0xfffd0000 0xb83fffff  /* pioC */
+				       0x003fffff 0x003f8000 0x00000000  /* pioD */
+				      >;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts
new file mode 100644
index 0000000..af907ea
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x25ek.dts
@@ -0,0 +1,16 @@
+/*
+ * at91sam9x25ek.dts - Device Tree file for AT91SAM9X25-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9x25.dtsi"
+/include/ "at91sam9x5ek.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G25-EK";
+	compatible = "atmel,at91sam9x25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+};
diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi
new file mode 100644
index 0000000..fb102d6
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x35.dtsi
@@ -0,0 +1,28 @@
+/*
+ * at91sam9x35.dtsi - Device Tree Include file for AT91SAM9X35 SoC
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+/include/ "at91sam9x5.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9X35 SoC";
+	compatible = "atmel, at91sam9x35, atmel,at91sam9x5";
+
+	ahb {
+		apb {
+			pinctrl@fffff400 {
+				atmel,mux-mask = <
+				      /*    A         B          C     */
+				       0xffffffff 0xffe03fff 0xc000000c  /* pioA */
+				       0x000406ff 0x00047e3f 0x00000000  /* pioB */
+				       0xfdffffff 0x00000000 0xb83fffff  /* pioC */
+				       0x003fffff 0x003f8000 0x00000000  /* pioD */
+				      >;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x35ek.dts b/arch/arm/boot/dts/at91sam9x35ek.dts
new file mode 100644
index 0000000..5ccb607
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x35ek.dts
@@ -0,0 +1,16 @@
+/*
+ * at91sam9x35ek.dts - Device Tree file for AT91SAM9X35-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9x35.dtsi"
+/include/ "at91sam9x5ek.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9X35-EK";
+	compatible = "atmel,at91sam9x35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+};
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index bc7a178..6482a85 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -108,21 +108,92 @@
 				interrupts = <21 4 0>;
 			};
 
-			pinctrl@fffff200 {
+			pinctrl@fffff400 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
 				ranges = <0xfffff400 0xfffff400 0x800>;
 
-				atmel,mux-mask = <
-				      /*    A         B          C     */
-				       0xffffffff 0xffe0399f 0xc000001c  /* pioA */
-				       0xffffffff 0xffc003ff 0xffc003ff  /* pioB */
-				       0xffffffff 0xffc003ff 0xffc003ff  /* pioC */
-				       0xffffffff 0xffc003ff 0xffc003ff  /* pioD */
-				      >;
-
 				/* shared pinctrl settings */
+				dbgu {
+					pinctrl_dbgu: dbgu-0 {
+						atmel,pins =
+							<0 9 0x1 0x0	/* PA9 periph A */
+							 0 10 0x1 0x1>;	/* PA10 periph A with pullup */
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<0 0 0x1 0x1	/* PA0 periph A with pullup */
+							 0 1 0x1 0x0>;	/* PA1 periph A */
+					};
+
+					pinctrl_uart0_rts_cts: uart0_rts_cts-0 {
+						atmel,pins =
+							<0 2 0x1 0x0	/* PA2 periph A */
+							 0 3 0x1 0x0>;	/* PA3 periph A */
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<0 5 0x1 0x1	/* PA5 periph A with pullup */
+							 0 6 0x1 0x0>;	/* PA6 periph A */
+					};
+
+					pinctrl_uart1_rts_cts: uart1_rts_cts-0 {
+						atmel,pins =
+							<3 27 0x3 0x0	/* PC27 periph C */
+							 3 28 0x3 0x0>;	/* PC28 periph C */
+					};
+				};
+
+				uart2 {
+					pinctrl_uart2: uart2-0 {
+						atmel,pins =
+							<0 7 0x1 0x1	/* PA7 periph A with pullup */
+							 0 8 0x1 0x0>;	/* PA8 periph A */
+					};
+
+					pinctrl_uart2_rts_cts: uart2_rts_cts-0 {
+						atmel,pins =
+							<0 0 0x2 0x0	/* PB0 periph B */
+							 0 1 0x2 0x0>;	/* PB1 periph B */
+					};
+				};
+
+				uart3 {
+					pinctrl_uart3: uart3-0 {
+						atmel,pins =
+							<3 23 0x2 0x1	/* PC22 periph B with pullup */
+							 3 23 0x2 0x0>;	/* PC23 periph B */
+					};
+
+					pinctrl_uart3_rts_cts: uart3_rts_cts-0 {
+						atmel,pins =
+							<3 24 0x2 0x0	/* PC24 periph B */
+							 3 25 0x2 0x0>;	/* PC25 periph B */
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<3 8 0x3 0x0	/* PC8 periph C */
+							 3 9 0x3 0x1>;	/* PC9 periph C with pullup */
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<3 16 0x3 0x0	/* PC16 periph C */
+							 3 17 0x3 0x1>;	/* PC17 periph C with pullup */
+					};
+				};
 
 				pioA: gpio@fffff400 {
 					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
@@ -171,6 +242,8 @@
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
 				interrupts = <1 4 7>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_dbgu>;
 				status = "disabled";
 			};
 
@@ -180,6 +253,8 @@
 				interrupts = <5 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
 				status = "disabled";
 			};
 
@@ -189,6 +264,8 @@
 				interrupts = <6 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
 				status = "disabled";
 			};
 
@@ -198,6 +275,8 @@
 				interrupts = <7 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart2>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9x5ek.dtsi
similarity index 75%
rename from arch/arm/boot/dts/at91sam9g25ek.dts
rename to arch/arm/boot/dts/at91sam9x5ek.dtsi
index 7829a4d..e5000a7 100644
--- a/arch/arm/boot/dts/at91sam9g25ek.dts
+++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi
@@ -1,18 +1,16 @@
 /*
- * at91sam9g25ek.dts - Device Tree file for AT91SAM9G25-EK board
+ * at91sam9x5ek.dtsi - Device Tree file for AT91SAM9x5CM Base board
  *
  *  Copyright (C) 2012 Atmel,
  *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
  *
  * Licensed under GPLv2 or later.
  */
-/dts-v1/;
-/include/ "at91sam9x5.dtsi"
 /include/ "at91sam9x5cm.dtsi"
 
 / {
-	model = "Atmel AT91SAM9G25-EK";
-	compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+	model = "Atmel AT91SAM9X5-EK";
+	compatible = "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
 
 	chosen {
 		bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index 30bb733..0838d30 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -35,4 +35,8 @@ dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9m10g45ek.dtb
 # sam9n12
 dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9n12ek.dtb
 # sam9x5
+dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g15ek.dtb
 dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g25ek.dtb
+dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g35ek.dtb
+dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9x25ek.dtb
+dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9x35ek.dtb
