@@ -6,6 +6,73 @@
};
ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+ compatible = "marvell,88f6281-pinctrl";
+ reg = <0x10000 0x20>;
+
+ pinctrl-0 = < &pmx_power_hdd &pmx_usb_vbus
+ &pmx_fan_low &pmx_fan_high
+ &pmx_led_function_red &pmx_led_alarm
+ &pmx_led_info &pmx_led_power
+ &pmx_fan_lock &pmx_button_function
+ &pmx_power_switch &pmx_power_auto_switch
+ &pmx_led_function_blue >;
+ pinctrl-names = "default";
+
+ pmx_power_hdd: pmx-power-hdd {
+ marvell,pins = "mpp10";
+ marvell,function = "gpio";
+ };
+ pmx_usb_vbus: pmx-usb-vbus {
+ marvell,pins = "mpp11";
+ marvell,function = "gpio";
+ };
+ pmx_fan_high: pmx-fan-high {
+ marvell,pins = "mpp18";
+ marvell,function = "gpo";
+ };
+ pmx_fan_low: pmx-fan-low {
+ marvell,pins = "mpp19";
+ marvell,function = "gpo";
+ };
+ pmx_led_function_blue: pmx-led-function-blue {
+ marvell,pins = "mpp36";
+ marvell,function = "gpio";
+ };
+ pmx_led_alarm: pmx-led-alarm {
+ marvell,pins = "mpp37";
+ marvell,function = "gpio";
+ };
+ pmx_led_info: pmx-led-info {
+ marvell,pins = "mpp38";
+ marvell,function = "gpio";
+ };
+ pmx_led_power: pmx-led-power {
+ marvell,pins = "mpp39";
+ marvell,function = "gpio";
+ };
+ pmx_fan_lock: pmx-fan-lock {
+ marvell,pins = "mpp40";
+ marvell,function = "gpo";
+ };
+ pmx_button_function: pmx-button-function {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+ pmx_power_switch: pmx-power-switch {
+ marvell,pins = "mpp42";
+ marvell,function = "gpio";
+ };
+ pmx_power_auto_switch: pmx-power-auto-switch {
+ marvell,pins = "mpp43";
+ marvell,function = "gpio";
+ };
+ pmx_led_function_red: pmx-led-function_red {
+ marvell,pins = "mpp43";
+ marvell,function = "gpio";
+ };
+
+ };
sata@80000 {
status = "okay";
nr-ports = <1>;
@@ -26,7 +26,6 @@
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
#include "common.h"
-#include "mpp.h"
static struct mv643xx_eth_platform_data lsxl_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
@@ -36,23 +35,6 @@ static struct mv643xx_eth_platform_data lsxl_ge01_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
-static unsigned int lsxl_mpp_config[] __initdata = {
- MPP10_GPO, /* HDD Power Enable */
- MPP11_GPIO, /* USB Vbus Enable */
- MPP18_GPO, /* FAN High Enable# */
- MPP19_GPO, /* FAN Low Enable# */
- MPP36_GPIO, /* Function Blue LED */
- MPP37_GPIO, /* Alarm LED */
- MPP38_GPIO, /* Info LED */
- MPP39_GPIO, /* Power LED */
- MPP40_GPIO, /* Fan Lock */
- MPP41_GPIO, /* Function Button */
- MPP42_GPIO, /* Power Switch */
- MPP43_GPIO, /* Power Auto Switch */
- MPP48_GPIO, /* Function Red LED */
- 0
-};
-
#define LSXL_GPIO_FAN_HIGH 18
#define LSXL_GPIO_FAN_LOW 19
#define LSXL_GPIO_FAN_LOCK 40
@@ -119,7 +101,6 @@ void __init lsxl_init(void)
/*
* Basic setup. Needs to be called early.
*/
- kirkwood_mpp_conf(lsxl_mpp_config);
/* usb and sata power on */
gpio_set_value(LSXL_GPIO_USB_POWER, 1);
Signed-off-by: Andrew Lunn <andrew@lunn.ch> --- arch/arm/boot/dts/kirkwood-lsxl.dtsi | 67 ++++++++++++++++++++++++++++++++++ arch/arm/mach-kirkwood/board-lsxl.c | 19 ---------- 2 files changed, 67 insertions(+), 19 deletions(-)