| Message ID | 1351668533-32712-1-git-send-email-s.hauer@pengutronix.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 31/10/12 08:28, Sascha Hauer wrote: > The i.MX27 clock tree can either be driven from a 26MHz oscillator > or from a 32768Hz oscillator. The latter was not properly implemented, > the mux between these two pathes was missing. Add this mux and while > at it rename the 'prem' (premultiplier) clk to 'fpm' (Frequency > Pre-Multiplier) to better match the datasheet. > > Signed-off-by: Sascha Hauer<s.hauer@pengutronix.de> Tested-by: Philippe Reynes <tremyfr@yahoo.fr> > --- > arch/arm/mach-imx/clk-imx27.c | 17 ++++++++++++++--- > 1 file changed, 14 insertions(+), 3 deletions(-) > > diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c > index 3b6b640..f8d9129 100644 > --- a/arch/arm/mach-imx/clk-imx27.c > +++ b/arch/arm/mach-imx/clk-imx27.c > @@ -51,8 +51,10 @@ > > static const char *vpu_sel_clks[] = { "spll", "mpll_main2", }; > static const char *cpu_sel_clks[] = { "mpll_main2", "mpll", }; > +static const char *mpll_sel_clks[] = { "fpm", "mpll_osc_sel", }; > +static const char *mpll_osc_sel_clks[] = { "ckih", "ckih_div1p5", }; > static const char *clko_sel_clks[] = { > - "ckil", "prem", "ckih", "ckih", > + "ckil", "fpm", "ckih", "ckih", > "ckih", "mpll", "spll", "cpu_div", > "ahb", "ipg", "per1_div", "per2_div", > "per3_div", "per4_div", "ssi1_div", "ssi2_div", > @@ -79,7 +81,8 @@ enum mx27_clks { > vpu_ahb_gate, fec_ahb_gate, emma_ahb_gate, emi_ahb_gate, dma_ahb_gate, > csi_ahb_gate, brom_ahb_gate, ata_ahb_gate, wdog_ipg_gate, usb_ipg_gate, > uart6_ipg_gate, uart5_ipg_gate, uart4_ipg_gate, uart3_ipg_gate, > - uart2_ipg_gate, uart1_ipg_gate, clk_max > + uart2_ipg_gate, uart1_ipg_gate, ckih_div1p5, fpm, mpll_osc_sel, > + mpll_sel, clk_max > }; > > static struct clk *clk[clk_max]; > @@ -91,7 +94,15 @@ int __init mx27_clocks_init(unsigned long fref) > clk[dummy] = imx_clk_fixed("dummy", 0); > clk[ckih] = imx_clk_fixed("ckih", fref); > clk[ckil] = imx_clk_fixed("ckil", 32768); > - clk[mpll] = imx_clk_pllv1("mpll", "ckih", CCM_MPCTL0); > + clk[fpm] = imx_clk_fixed_factor("fpm", "ckil", 1024, 1); > + clk[ckih_div1p5] = imx_clk_fixed_factor("ckih_div1p5", "ckih", 2, 3); > + > + clk[mpll_osc_sel] = imx_clk_mux("mpll_osc_sel", CCM_CSCR, 4, 1, > + mpll_osc_sel_clks, > + ARRAY_SIZE(mpll_osc_sel_clks)); > + clk[mpll_sel] = imx_clk_mux("mpll_sel", CCM_CSCR, 16, 1, mpll_sel_clks, > + ARRAY_SIZE(mpll_sel_clks)); > + clk[mpll] = imx_clk_pllv1("mpll", "mpll_sel", CCM_MPCTL0); > clk[spll] = imx_clk_pllv1("spll", "ckih", CCM_SPCTL0); > clk[mpll_main2] = imx_clk_fixed_factor("mpll_main2", "mpll", 2, 3); >
diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index 3b6b640..f8d9129 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -51,8 +51,10 @@ static const char *vpu_sel_clks[] = { "spll", "mpll_main2", }; static const char *cpu_sel_clks[] = { "mpll_main2", "mpll", }; +static const char *mpll_sel_clks[] = { "fpm", "mpll_osc_sel", }; +static const char *mpll_osc_sel_clks[] = { "ckih", "ckih_div1p5", }; static const char *clko_sel_clks[] = { - "ckil", "prem", "ckih", "ckih", + "ckil", "fpm", "ckih", "ckih", "ckih", "mpll", "spll", "cpu_div", "ahb", "ipg", "per1_div", "per2_div", "per3_div", "per4_div", "ssi1_div", "ssi2_div", @@ -79,7 +81,8 @@ enum mx27_clks { vpu_ahb_gate, fec_ahb_gate, emma_ahb_gate, emi_ahb_gate, dma_ahb_gate, csi_ahb_gate, brom_ahb_gate, ata_ahb_gate, wdog_ipg_gate, usb_ipg_gate, uart6_ipg_gate, uart5_ipg_gate, uart4_ipg_gate, uart3_ipg_gate, - uart2_ipg_gate, uart1_ipg_gate, clk_max + uart2_ipg_gate, uart1_ipg_gate, ckih_div1p5, fpm, mpll_osc_sel, + mpll_sel, clk_max }; static struct clk *clk[clk_max]; @@ -91,7 +94,15 @@ int __init mx27_clocks_init(unsigned long fref) clk[dummy] = imx_clk_fixed("dummy", 0); clk[ckih] = imx_clk_fixed("ckih", fref); clk[ckil] = imx_clk_fixed("ckil", 32768); - clk[mpll] = imx_clk_pllv1("mpll", "ckih", CCM_MPCTL0); + clk[fpm] = imx_clk_fixed_factor("fpm", "ckil", 1024, 1); + clk[ckih_div1p5] = imx_clk_fixed_factor("ckih_div1p5", "ckih", 2, 3); + + clk[mpll_osc_sel] = imx_clk_mux("mpll_osc_sel", CCM_CSCR, 4, 1, + mpll_osc_sel_clks, + ARRAY_SIZE(mpll_osc_sel_clks)); + clk[mpll_sel] = imx_clk_mux("mpll_sel", CCM_CSCR, 16, 1, mpll_sel_clks, + ARRAY_SIZE(mpll_sel_clks)); + clk[mpll] = imx_clk_pllv1("mpll", "mpll_sel", CCM_MPCTL0); clk[spll] = imx_clk_pllv1("spll", "ckih", CCM_SPCTL0); clk[mpll_main2] = imx_clk_fixed_factor("mpll_main2", "mpll", 2, 3);
The i.MX27 clock tree can either be driven from a 26MHz oscillator or from a 32768Hz oscillator. The latter was not properly implemented, the mux between these two pathes was missing. Add this mux and while at it rename the 'prem' (premultiplier) clk to 'fpm' (Frequency Pre-Multiplier) to better match the datasheet. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- arch/arm/mach-imx/clk-imx27.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-)