diff mbox

[5/8] ARM: shmobile: marzen: add HSPI support

Message ID 1351730411-1874-6-git-send-email-horms@verge.net.au (mailing list archive)
State New, archived
Headers show

Commit Message

Simon Horman Nov. 1, 2012, 12:40 a.m. UTC 
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/configs/marzen_defconfig     |    4 ++++
 arch/arm/mach-shmobile/board-marzen.c |   25 +++++++++++++++++++++++++
 2 files changed, 29 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig
index 53382b6..5b8215f 100644
--- a/arch/arm/configs/marzen_defconfig
+++ b/arch/arm/configs/marzen_defconfig
@@ -69,6 +69,10 @@  CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_NR_UARTS=6
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_RCAR=y
+CONFIG_SPI=y
+CONFIG_SPI_SH_HSPI=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index b8a7525..69f7f46 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -30,6 +30,8 @@ 
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/smsc911x.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/sh_hspi.h>
 #include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/mfd/tmio.h>
 #include <mach/hardware.h>
@@ -126,10 +128,27 @@  static struct platform_device thermal_device = {
 	.num_resources	= ARRAY_SIZE(thermal_resources),
 };
 
+/* HSPI */
+static struct resource hspi_resources[] = {
+	[0] = {
+		.start		= 0xFFFC7000,
+		.end		= 0xFFFC7018 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device hspi_device = {
+	.name	= "sh-hspi",
+	.id	= 0,
+	.resource	= hspi_resources,
+	.num_resources	= ARRAY_SIZE(hspi_resources),
+};
+
 static struct platform_device *marzen_devices[] __initdata = {
 	&eth_device,
 	&sdhi0_device,
 	&thermal_device,
+	&hspi_device,
 };
 
 static void __init marzen_init(void)
@@ -163,6 +182,12 @@  static void __init marzen_init(void)
 	gpio_request(GPIO_FN_SD0_CD, NULL);
 	gpio_request(GPIO_FN_SD0_WP, NULL);
 
+	/* HSPI 0 */
+	gpio_request(GPIO_FN_HSPI_CLK0,	NULL);
+	gpio_request(GPIO_FN_HSPI_CS0,	NULL);
+	gpio_request(GPIO_FN_HSPI_TX0,	NULL);
+	gpio_request(GPIO_FN_HSPI_RX0,	NULL);
+
 	r8a7779_add_standard_devices();
 	platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices));
 }