@@ -715,6 +715,37 @@ int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_int_enable);
+/**
+ * omap_dm_timer_set_int_disable - disable timer interrupts
+ * @timer: pointer to timer handle
+ * @mask: bit mask of interrupts to be disabled
+ *
+ * Disables the specified timer interrupts for a timer.
+ */
+int omap_dm_timer_set_int_disable(struct omap_dm_timer *timer, u32 mask)
+{
+ u32 l = mask;
+
+ if (unlikely(!timer))
+ return -EINVAL;
+
+ omap_dm_timer_enable(timer);
+
+ if (timer->revision == 1)
+ l = __raw_readl(timer->irq_ena) & ~mask;
+
+ __raw_writel(l, timer->irq_dis);
+ l = omap_dm_timer_read_reg(timer, OMAP_TIMER_WAKEUP_EN_REG) & ~mask;
+ omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG, l);
+
+ /* Save the context */
+ timer->context.tier &= ~mask;
+ timer->context.twer &= ~mask;
+ omap_dm_timer_disable(timer);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(omap_dm_timer_set_int_disable);
+
unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer)
{
unsigned int l;
@@ -137,6 +137,7 @@ int omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, i
int omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler);
int omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value);
+int omap_dm_timer_set_int_disable(struct omap_dm_timer *timer, u32 mask);
unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer);
int omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value);
@@ -322,7 +323,7 @@ static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer)
OMAP_TIMER_V1_SYS_STAT_OFFSET;
timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET;
timer->irq_ena = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
- timer->irq_dis = NULL;
+ timer->irq_dis = timer->io_base + OMAP_TIMER_V1_INT_EN_OFFSET;
timer->pend = timer->io_base + _OMAP_TIMER_WRITE_PEND_OFFSET;
timer->func_base = timer->io_base;
} else {
The OMAP dmtimer driver does not currently have a function to disable the timer interrupts. For some timer instances the timer interrupt enable function can be used to disable the interrupts because the same interrupt enable register is used to disable interrupts. However, some timer instances have separate interrupt enable/disable registers and so this will not work. Therefore, add a dedicated function to disable interrupts. This change is required for OMAP4+ devices. For OMAP4, all timers apart from 1, 2 and 10 need this function and for OMAP5 all timers need this function. Please note that the interrupt disable function has been written so that it can be used by all OMAP devices. Signed-off-by: Jon Hunter <jon-hunter@ti.com> --- arch/arm/plat-omap/dmtimer.c | 31 +++++++++++++++++++++++++++++ arch/arm/plat-omap/include/plat/dmtimer.h | 3 ++- 2 files changed, 33 insertions(+), 1 deletion(-)