new file mode 100644
@@ -0,0 +1,26 @@
+* Atmel at91sam9g20ek wm8731 audio complex
+
+Required properties:
+ - compatible: "atmel,at91sam9g20ek-wm8731-audio"
+ - atmel,model: The user-visible name of this sound complex.
+ - atmel,audio-routing: A list of the connections between audio components.
+ - atmel,ssc-controller: The phandle of the SSC controller
+ - atmel,audio-codec: The phandle of the WM8731 audio codec
+Optional properties:
+ - pinctrl-names, pinctrl-0: Please refer to pinctrl-bindings.txt
+
+Example:
+sound {
+ compatible = "atmel,at91sam9g20ek-wm8731-audio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pck0_as_mck>;
+
+ atmel,model = "wm8731 @ AT91SAMG20EK";
+
+ atmel,audio-routing =
+ "Ext Spk", "LHPOUT",
+ "Int MIC", "MICIN";
+
+ atmel,ssc-controller = <&ssc0>;
+ atmel,audio-codec = <&wm8731>;
+};
@@ -30,6 +30,16 @@
ahb {
apb {
+ pinctrl@fffff400 {
+ board {
+ pinctrl_pck0_as_mck: pck0_as_mck {
+ atmel,pins =
+ <2 1 0x2 0x0>; /* PC1 periph B */
+ };
+
+ };
+ };
+
dbgu: serial@fffff200 {
status = "okay";
};
@@ -57,6 +67,11 @@
atmel,vbus-gpio = <&pioC 5 0>;
status = "okay";
};
+
+ ssc0: ssc@fffbc000 {
+ status = "okay";
+ pinctrl-0 = <&pinctrl_ssc0_tx>;
+ };
};
nand0: nand@40000000 {
@@ -120,8 +135,8 @@
reg = <0x50>;
};
- wm8731@1b {
- compatible = "wm8731";
+ wm8731: wm8731@1b {
+ compatible = "wlf,wm8731";
reg = <0x1b>;
};
};
@@ -145,4 +160,19 @@
gpio-key,wakeup;
};
};
+
+ sound {
+ compatible = "atmel,at91sam9g20ek-wm8731-audio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pck0_as_mck>;
+
+ atmel,model = "wm8731 @ AT91SAMG20EK";
+
+ atmel,audio-routing =
+ "Ext Spk", "LHPOUT",
+ "Int Mic", "MICIN";
+
+ atmel,ssc-controller = <&ssc0>;
+ atmel,audio-codec = <&wm8731>;
+ };
};
@@ -16,8 +16,7 @@ config SND_ATMEL_SOC_SSC
config SND_AT91_SOC_SAM9G20_WM8731
tristate "SoC Audio support for WM8731-based At91sam9g20 evaluation board"
- depends on ATMEL_SSC && ARCH_AT91SAM9G20 && SND_ATMEL_SOC && \
- AT91_PROGRAMMABLE_CLOCKS
+ depends on ATMEL_SSC && SND_ATMEL_SOC && AT91_PROGRAMMABLE_CLOCKS
select SND_ATMEL_SOC_SSC
select SND_SOC_WM8731
help
@@ -38,6 +38,8 @@
#include <linux/platform_device.h>
#include <linux/i2c.h>
+#include <linux/pinctrl/consumer.h>
+
#include <linux/atmel-ssc.h>
#include <sound/core.h>
@@ -197,14 +199,37 @@ static struct snd_soc_card snd_soc_at91sam9g20ek = {
static int __devinit at91sam9g20ek_audio_probe(struct platform_device *pdev)
{
+ struct device_node *np = pdev->dev.of_node;
+ struct device_node *codec_np, *cpu_np;
struct clk *pllb;
struct snd_soc_card *card = &snd_soc_at91sam9g20ek;
- int ret;
+ struct pinctrl *pinctrl;
+ int ret, id;
+
+ pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+ if (IS_ERR(pinctrl)) {
+ dev_err(&pdev->dev, "Failed to request pinctrl\n");
+ return PTR_ERR(pinctrl);
+ }
- if (!(machine_is_at91sam9g20ek() || machine_is_at91sam9g20ek_2mmc()))
- return -ENODEV;
+ if (np) {
+ cpu_np = of_parse_phandle(np, "atmel,ssc-controller", 0);
+ if (!cpu_np) {
+ dev_err(&pdev->dev, "codec info missing\n");
+ return -EINVAL;
+ }
+
+ id = of_alias_get_id(cpu_np, "ssc");
+ of_node_put(cpu_np);
+ } else {
+ if (!(machine_is_at91sam9g20ek() ||
+ machine_is_at91sam9g20ek_2mmc()))
+ return -ENODEV;
+
+ id = pdev->id;
+ }
- ret = atmel_ssc_set_audio(pdev->id);
+ ret = atmel_ssc_set_audio(id);
if (ret)
goto err;
@@ -234,6 +259,42 @@ static int __devinit at91sam9g20ek_audio_probe(struct platform_device *pdev)
clk_set_rate(mclk, MCLK_RATE);
card->dev = &pdev->dev;
+
+ /* Parse device node info */
+ if (np) {
+ ret = snd_soc_of_parse_card_name(card, "atmel,model");
+ if (ret)
+ goto err;
+
+ ret = snd_soc_of_parse_audio_routing(card,
+ "atmel,audio-routing");
+ if (ret)
+ goto err;
+
+ /* Parse codec info */
+ at91sam9g20ek_dai.codec_name = NULL;
+ codec_np = of_parse_phandle(np, "atmel,audio-codec", 0);
+ if (!codec_np) {
+ dev_err(&pdev->dev, "codec info missing\n");
+ return -EINVAL;
+ }
+ at91sam9g20ek_dai.codec_of_node = codec_np;
+
+ /* Parse dai and platform info */
+ at91sam9g20ek_dai.cpu_dai_name = NULL;
+ at91sam9g20ek_dai.platform_name = NULL;
+ cpu_np = of_parse_phandle(np, "atmel,ssc-controller", 0);
+ if (!cpu_np) {
+ dev_err(&pdev->dev, "dai and pcm info missing\n");
+ return -EINVAL;
+ }
+ at91sam9g20ek_dai.cpu_of_node = cpu_np;
+ at91sam9g20ek_dai.platform_of_node = cpu_np;
+
+ of_node_put(codec_np);
+ of_node_put(cpu_np);
+ }
+
ret = snd_soc_register_card(card);
if (ret) {
printk(KERN_ERR "ASoC: snd_soc_register_card() failed\n");
@@ -262,10 +323,19 @@ static int __devexit at91sam9g20ek_audio_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_OF
+static const struct of_device_id at91sam9g20ek_wm8731_dt_ids[] = {
+ { .compatible = "atmel,at91sam9g20ek-wm8731-audio", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, at91sam9g20ek_wm8731_dt_ids);
+#endif
+
static struct platform_driver at91sam9g20ek_audio_driver = {
.driver = {
.name = "at91sam9g20ek-audio",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(at91sam9g20ek_wm8731_dt_ids),
},
.probe = at91sam9g20ek_audio_probe,
.remove = __devexit_p(at91sam9g20ek_audio_remove),
convert at91sam9g20ek wm8731 to device tree support Signed-off-by: Bo Shen <voice.shen@atmel.com> --- Change since v4 RFC: Using the full name of the EK which make it more clear Change since v3 RFC: Remove dai node, remap ssc in place without pinctrl added, so don't modify the dtsi file, will be added soon Change since v2: No change Change since v1: Add sam9g20-wm8731 binding document --- .../sound/atmel-at91sam9g20ek-wm8731-audio.txt | 26 +++++++ arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 34 ++++++++- sound/soc/atmel/Kconfig | 3 +- sound/soc/atmel/sam9g20_wm8731.c | 78 +++++++++++++++++++- 4 files changed, 133 insertions(+), 8 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/atmel-at91sam9g20ek-wm8731-audio.txt