new file mode 100644
@@ -0,0 +1,162 @@
+* Clock bindings for Freescale i.MX25
+
+Required properties:
+- compatible: Should be "fsl,imx25-ccm"
+- reg: Address and length of the register set
+- interrupts: Should contain CCM interrupt
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. The following is a full list of i.MX25
+clocks and IDs.
+
+ Clock ID
+ ---------------------------
+ dummy 0
+ osc 1
+ mpll 2
+ upll 3
+ mpll_cpu_3_4 4
+ cpu_sel 5
+ cpu 6
+ ahb 7
+ usb_div 8
+ ipg 9
+ per0_sel 10
+ per1_sel 11
+ per2_sel 12
+ per3_sel 13
+ per4_sel 14
+ per5_sel 15
+ per6_sel 16
+ per7_sel 17
+ per8_sel 18
+ per9_sel 19
+ per10_sel 20
+ per11_sel 21
+ per12_sel 22
+ per13_sel 23
+ per14_sel 24
+ per15_sel 25
+ per0 26
+ per1 27
+ per2 28
+ per3 29
+ per4 30
+ per5 31
+ per6 32
+ per7 33
+ per8 34
+ per9 35
+ per10 36
+ per11 37
+ per12 38
+ per13 39
+ per14 40
+ per15 41
+ csi_ipg_per 42
+ epit_ipg_per 43
+ esai_ipg_per 44
+ esdhc1_ipg_per 45
+ esdhc2_ipg_per 46
+ gpt_ipg_per 47
+ i2c_ipg_per 48
+ lcdc_ipg_per 49
+ nfc_ipg_per 50
+ owire_ipg_per 51
+ pwm_ipg_per 52
+ sim1_ipg_per 53
+ sim2_ipg_per 54
+ ssi1_ipg_per 55
+ ssi2_ipg_per 56
+ uart_ipg_per 57
+ ata_ahb 58
+ reserved 59
+ csi_ahb 60
+ emi_ahb 61
+ esai_ahb 62
+ esdhc1_ahb 63
+ esdhc2_ahb 64
+ fec_ahb 65
+ lcdc_ahb 66
+ rtic_ahb 67
+ sdma_ahb 68
+ slcdc_ahb 69
+ usbotg_ahb 70
+ reserved 71
+ reserved 72
+ reserved 73
+ reserved 74
+ can1_ipg 75
+ can2_ipg 76
+ csi_ipg 77
+ cspi1_ipg 78
+ cspi2_ipg 79
+ cspi3_ipg 80
+ dryice_ipg 81
+ ect_ipg 82
+ epit1_ipg 83
+ epit2_ipg 84
+ reserved 85
+ esdhc1_ipg 86
+ esdhc2_ipg 87
+ fec_ipg 88
+ reserved 89
+ reserved 90
+ reserved 91
+ gpt1_ipg 92
+ gpt2_ipg 93
+ gpt3_ipg 94
+ gpt4_ipg 95
+ reserved 96
+ reserved 97
+ reserved 98
+ iim_ipg 99
+ reserved 100
+ reserved 101
+ kpp_ipg 102
+ lcdc_ipg 103
+ reserved 104
+ pwm1_ipg 105
+ pwm2_ipg 106
+ pwm3_ipg 107
+ pwm4_ipg 108
+ rngb_ipg 109
+ reserved 110
+ scc_ipg 111
+ sdma_ipg 112
+ sim1_ipg 113
+ sim2_ipg 114
+ slcdc_ipg 115
+ spba_ipg 116
+ ssi1_ipg 117
+ ssi2_ipg 118
+ tsc_ipg 119
+ uart1_ipg 120
+ uart2_ipg 121
+ uart3_ipg 122
+ uart4_ipg 123
+ uart5_ipg 124
+ reserved 125
+ wdt_ipg 126
+
+Examples:
+
+clks: ccm@53f80000 {
+ compatible = "fsl,imx25-ccm";
+ reg = <0x53f80000 0x4000>;
+ interrupts = <31>;
+ clock-output-names = ...
+ "uart_ipg",
+ "uart_serial",
+ ...;
+};
+
+uart1: serial@43f90000 {
+ compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+ reg = <0x43f90000 0x4000>;
+ interrupts = <45>;
+ clocks = <&clks 79>, <&clks 50>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+};
new file mode 100644
@@ -0,0 +1,515 @@
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ usb0 = &usbotg;
+ usb1 = &usbhost1;
+ };
+
+ asic: asic-interrupt-controller@68000000 {
+ compatible = "fsl,imx25-asic", "fsl,avic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x68000000 0x8000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ osc {
+ compatible = "fsl,imx-osc", "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&asic>;
+ ranges;
+
+ aips@43f00000 { /* AIPS1 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x43f00000 0x100000>;
+ ranges;
+
+ i2c1: i2c@43f80000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
+ reg = <0x43f80000 0x4000>;
+ clocks = <&clks 48>;
+ clock-names = "";
+ interrupts = <3>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@43f84000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
+ reg = <0x43f84000 0x4000>;
+ clocks = <&clks 48>;
+ clock-names = "";
+ interrupts = <10>;
+ status = "disabled";
+ };
+
+ can1: can@43f88000 {
+ compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
+ reg = <0x43f88000 0x4000>;
+ interrupts = <43>;
+ clocks = <&clks 75>, <&clks 75>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ can2: can@43f8c000 {
+ compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
+ reg = <0x43f8c000 0x4000>;
+ interrupts = <44>;
+ clocks = <&clks 76>, <&clks 76>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart1: serial@43f90000 {
+ compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+ reg = <0x43f90000 0x4000>;
+ interrupts = <45>;
+ clocks = <&clks 120>, <&clks 57>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart2: serial@43f94000 {
+ compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+ reg = <0x43f94000 0x4000>;
+ interrupts = <32>;
+ clocks = <&clks 121>, <&clks 57>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ i2c2: i2c@43f98000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
+ reg = <0x43f98000 0x4000>;
+ clocks = <&clks 48>;
+ clock-names = "";
+ interrupts = <4>;
+ status = "disabled";
+ };
+
+ owire@43f9c000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x43f9c000 0x4000>;
+ clocks = <&clks 51>;
+ clock-names = "";
+ interrupts = <2>;
+ status = "disabled";
+ };
+
+ spi1: cspi@43fa4000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
+ reg = <0x43fa4000 0x4000>;
+ clocks = <&clks 62>;
+ clock-names = "ipg";
+ interrupts = <14>;
+ status = "disabled";
+ };
+
+ kpp@43fa8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x43fa8000 0x4000>;
+ clocks = <&clks 102>;
+ clock-names = "";
+ interrupts = <24>;
+ status = "disabled";
+ };
+
+ iomuxc@43fac000{
+ compatible = "fsl,imx25-iomuxc";
+ reg = <0x43fac000 0x4000>;
+ };
+
+ audmux@43fb0000 {
+ compatible = "fsl,imx25-audmux", "fsl,imx31-audmux";
+ reg = <0x43fb0000 0x4000>;
+ status = "disabled";
+ };
+ };
+
+ spba@50000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x50000000 0x40000>;
+ ranges;
+
+ spi3: cspi@50004000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
+ reg = <0x50004000 0x4000>;
+ interrupts = <0>;
+ clocks = <&clks 80>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ uart4: serial@50008000 {
+ compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+ reg = <0x50008000 0x4000>;
+ interrupts = <5>;
+ clocks = <&clks 123>, <&clks 57>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart3: serial@5000c000 {
+ compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+ reg = <0x5000c000 0x4000>;
+ interrupts = <18>;
+ clocks = <&clks 122>, <&clks 57>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ spi2: cspi@50010000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
+ reg = <0x50010000 0x4000>;
+ clocks = <&clks 79>;
+ clock-names = "ipg";
+ interrupts = <13>;
+ status = "disabled";
+ };
+
+ ssi2: ssi@50014000 {
+ compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
+ reg = <0x50014000 0x4000>;
+ interrupts = <11>;
+ status = "disabled";
+ };
+
+ esai@50018000 {
+ reg = <0x50018000 0x4000>;
+ interrupts = <7>;
+ };
+
+ uart5: serial@5002c000 {
+ compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+ reg = <0x5002c000 0x4000>;
+ interrupts = <40>;
+ clocks = <&clks 124>, <&clks 57>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ tsc: tsc@50030000 {
+ compatible = "fsl,imx25-adc", "fsl,imx21-tsc";
+ reg = <0x50030000 0x4000>;
+ interrupts = <46>;
+ clocks = <&clks 119>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ ssi1: ssi@50034000 {
+ compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
+ reg = <0x50034000 0x4000>;
+ interrupts = <12>;
+ status = "disabled";
+ };
+
+ fec: ethernet@50038000 {
+ compatible = "fsl,imx25-fec";
+ reg = <0x50038000 0x4000>;
+ interrupts = <57>;
+ clocks = <&clks 88>, <&clks 65>;
+ clock-names = "ipg", "ahb";
+ status = "disabled";
+ };
+ };
+
+ aips@53f00000 { /* AIPS2 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x53f00000 0x100000>;
+ ranges;
+
+ clks: ccm@53f80000 {
+ compatible = "fsl,imx25-ccm";
+ reg = <0x53f80000 0x4000>;
+ interrupts = <31>;
+ #clock-cells = <1>;
+ };
+
+ gpt4: timer@53f84000 {
+ compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
+ reg = <0x53f84000 0x4000>;
+ clocks = <&clks 9>, <&clks 45>;
+ clock-names = "ipg", "per";
+ interrupts = <1>;
+ };
+
+ gpt3: timer@53f88000 {
+ compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
+ reg = <0x53f88000 0x4000>;
+ clocks = <&clks 9>, <&clks 47>;
+ clock-names = "ipg", "per";
+ interrupts = <29>;
+ };
+
+ gpt2: timer@53f8c000 {
+ compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
+ reg = <0x53f8c000 0x4000>;
+ clocks = <&clks 9>, <&clks 47>;
+ clock-names = "ipg", "per";
+ interrupts = <53>;
+ };
+
+ gpt1: timer@53f90000 {
+ compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
+ reg = <0x53f90000 0x4000>;
+ clocks = <&clks 9>, <&clks 47>;
+ clock-names = "ipg", "per";
+ interrupts = <54>;
+ };
+
+ epit1: timer@53f94000 {
+ compatible = "fsl,imx25-epit";
+ reg = <0x53f94000 0x4000>;
+ interrupts = <28>;
+ };
+
+ epit2: timer@53f98000 {
+ compatible = "fsl,imx25-epit";
+ reg = <0x53f98000 0x4000>;
+ interrupts = <27>;
+ };
+
+ gpio4: gpio@53f9c000 {
+ compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
+ reg = <0x53f9c000 0x4000>;
+ interrupts = <23>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pwm2: pwm@53fa0000 {
+ compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
+ #pwm-cells = <2>;
+ reg = <0x53fa0000 0x4000>;
+ clocks = <&clks 106>, <&clks 36>;
+ clock-names = "ipg", "per";
+ interrupts = <36>;
+ };
+
+ gpio3: gpio@53fa4000 {
+ compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
+ reg = <0x53fa4000 0x4000>;
+ interrupts = <16>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pwm3: pwm@53fa8000 {
+ compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
+ #pwm-cells = <2>;
+ reg = <0x53fa8000 0x4000>;
+ clocks = <&clks 107>, <&clks 36>;
+ clock-names = "ipg", "per";
+ interrupts = <41>;
+ };
+
+ esdhc1: esdhc@53fb4000 {
+ compatible = "fsl,imx25-esdhc";
+ reg = <0x53fb4000 0x4000>;
+ interrupts = <9>;
+ clocks = <&clks 86>, <&clks 63>, <&clks 45>;
+ clock-names = "ipg", "ahb", "per";
+ status = "disabled";
+ };
+
+ esdhc2: esdhc@53fb8000 {
+ compatible = "fsl,imx25-esdhc";
+ reg = <0x53fb8000 0x4000>;
+ interrupts = <8>;
+ clocks = <&clks 87>, <&clks 64>, <&clks 46>;
+ clock-names = "ipg", "ahb", "per";
+ status = "disabled";
+ };
+
+ lcdc@53fbc000 {
+ reg = <0x53fbc000 0x4000>;
+ interrupts = <39>;
+ clocks = <&clks 103>, <&clks 66>, <&clks 49>;
+ clock-names = "ipg", "ahb", "per";
+ status = "disabled";
+ };
+
+ slcdc@53fc0000 {
+ reg = <0x53fc0000 0x4000>;
+ interrupts = <38>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@53fc8000 {
+ compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
+ reg = <0x53fc8000 0x4000>;
+ clocks = <&clks 108>, <&clks 36>;
+ clock-names = "ipg", "per";
+ interrupts = <42>;
+ };
+
+ gpio1: gpio@53fcc000 {
+ compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
+ reg = <0x53fcc000 0x4000>;
+ interrupts = <52>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@53fd0000 {
+ compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
+ reg = <0x53fd0000 0x4000>;
+ interrupts = <51>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ sdma@53fd4000 {
+ compatible = "fsl,imx25-sdma", "fsl,imx35-sdma";
+ reg = <0x53fd4000 0x4000>;
+ clocks = <&clks 112>, <&clks 68>;
+ clock-names = "ipg", "ahb";
+ interrupts = <34>;
+ };
+
+ wdog@53fdc000 {
+ compatible = "fsl,imx25-wdt", "fsl,imx21-wdt";
+ reg = <0x53fdc000 0x4000>;
+ clocks = <&clks 126>;
+ clock-names = "";
+ interrupts = <55>;
+ };
+
+ pwm1: pwm@53fe0000 {
+ compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
+ #pwm-cells = <2>;
+ reg = <0x53fe0000 0x4000>;
+ clocks = <&clks 105>, <&clks 36>;
+ clock-names = "ipg", "per";
+ interrupts = <26>;
+ };
+
+ usbphy1: usbphy@1 {
+ compatible = "nop-usbphy";
+ status = "disabled";
+ };
+
+ usbphy2: usbphy@2 {
+ compatible = "nop-usbphy";
+ status = "disabled";
+ };
+
+ usbotg: usb@53ff4000 {
+ compatible = "fsl,imx25-usb", "fsl,imx27-usb";
+ reg = <0x53ff4000 0x0200>;
+ interrupts = <37>;
+ clocks = <&clks 9>, <&clks 70>, <&clks 8>;
+ clock-names = "ipg", "ahb", "per";
+ fsl,usbmisc = <&usbmisc 0>;
+ status = "disabled";
+ };
+
+ usbhost1: usb@53ff4400 {
+ compatible = "fsl,imx25-usb", "fsl,imx27-usb";
+ reg = <0x53ff4400 0x0200>;
+ interrupts = <35>;
+ clocks = <&clks 9>, <&clks 70>, <&clks 8>;
+ clock-names = "ipg", "ahb", "per";
+ fsl,usbmisc = <&usbmisc 1>;
+ status = "disabled";
+ };
+
+ usbmisc: usbmisc@53ff4600 {
+ #index-cells = <1>;
+ compatible = "fsl,imx25-usbmisc";
+ clocks = <&clks 9>, <&clks 70>, <&clks 8>;
+ clock-names = "ipg", "ahb", "per";
+ reg = <0x53ff4600 0x00f>;
+ status = "disabled";
+ };
+
+ dryice@53ffc000 {
+ compatible = "fsl,imx25-dryice", "fsl,imx25-rtc";
+ reg = <0x53ffc000 0x4000>;
+ clocks = <&clks 81>;
+ clock-names = "ipg";
+ interrupts = <25>;
+ };
+ };
+
+ emi@80000000 {
+ compatible = "fsl,emi-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x80000000 0x3b002000>;
+ ranges;
+
+ nand@bb000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ compatible = "fsl,imx25-nand";
+ reg = <0xbb000000 0x2000>;
+ clocks = <&clks 50>;
+ clock-names = "";
+ interrupts = <33>;
+ status = "disabled";
+ };
+ };
+ };
+};