From patchwork Thu Nov 15 21:28:20 2012 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Andrew Lunn X-Patchwork-Id: 1751771 Return-Path: X-Original-To: patchwork-linux-arm@patchwork.kernel.org Delivered-To: patchwork-process-083081@patchwork2.kernel.org Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) by patchwork2.kernel.org (Postfix) with ESMTP id F12DADF2AB for ; Thu, 15 Nov 2012 21:31:46 +0000 (UTC) Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.76 #1 (Red Hat Linux)) id 1TZ708-0004S0-Dj; Thu, 15 Nov 2012 21:29:32 +0000 Received: from londo.lunn.ch ([80.238.139.98]) by merlin.infradead.org with esmtp (Exim 4.76 #1 (Red Hat Linux)) id 1TZ6zV-0004Lk-Dv for linux-arm-kernel@lists.infradead.org; Thu, 15 Nov 2012 21:29:00 +0000 Received: from lunn by londo.lunn.ch with local (Exim 3.36 #1 (Debian)) id 1TZ6zI-0008E8-00; Thu, 15 Nov 2012 22:28:40 +0100 From: Andrew Lunn To: mturquette@linaro.org Subject: [PATCH 1/7] clk: mvebu: add mvebu core clocks. Date: Thu, 15 Nov 2012 22:28:20 +0100 Message-Id: <1353014906-31566-2-git-send-email-andrew@lunn.ch> X-Mailer: git-send-email 1.7.10.4 In-Reply-To: <1353014906-31566-1-git-send-email-andrew@lunn.ch> References: <1353014906-31566-1-git-send-email-andrew@lunn.ch> X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20121115_162854_864914_BDAF5659 X-CRM114-Status: GOOD ( 22.63 ) X-Spam-Score: -2.6 (--) X-Spam-Report: SpamAssassin version 3.3.2 on merlin.infradead.org summary: Content analysis details: (-2.6 points) pts rule name description ---- ---------------------- -------------------------------------------------- -0.0 SPF_HELO_PASS SPF: HELO matches SPF record -0.0 SPF_PASS SPF: sender matches SPF record -0.7 RP_MATCHES_RCVD Envelope sender domain matches handover relay domain -1.9 BAYES_00 BODY: Bayes spam probability is 0 to 1% [score: 0.0000] Cc: Thomas Petazzoni , Andrew Lunn , Jason Cooper , devicetree-discuss@lists.ozlabs.org, Gregory Clement , linux ARM , Sebastian Hesselbarth X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Sender: linux-arm-kernel-bounces@lists.infradead.org Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org From: Sebastian Hesselbarth This driver allows to provide DT clocks for core clocks found on Marvell Kirkwood, Dove & 370/XP SoCs. The core clock frequencies and ratios are determined by decoding the Sample-At-Reset registers. Although technically correct, using a divider of 0 will lead to div_by_zero panic. Let's use a ratio of 0/1 instead to fail later with a zero clock. Signed-off-by: Gregory CLEMENT Signed-off-by: Sebastian Hesselbarth Signed-off-by: Andrew Lunn --- .../devicetree/bindings/clock/mvebu-core-clock.txt | 47 ++ drivers/clk/Kconfig | 2 + drivers/clk/Makefile | 1 + drivers/clk/mvebu/Kconfig | 3 + drivers/clk/mvebu/Makefile | 1 + drivers/clk/mvebu/clk-core.c | 675 ++++++++++++++++++++ drivers/clk/mvebu/clk-core.h | 18 + drivers/clk/mvebu/clk.c | 23 + include/linux/clk/mvebu.h | 22 + 9 files changed, 792 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/mvebu-core-clock.txt create mode 100644 drivers/clk/mvebu/Kconfig create mode 100644 drivers/clk/mvebu/Makefile create mode 100644 drivers/clk/mvebu/clk-core.c create mode 100644 drivers/clk/mvebu/clk-core.h create mode 100644 drivers/clk/mvebu/clk.c create mode 100644 include/linux/clk/mvebu.h diff --git a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt new file mode 100644 index 0000000..84cfae7 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt @@ -0,0 +1,47 @@ +* Core Clock bindings for Marvell MVEBU SoCs + +Marvell MVEBU SoCs usually allow to determine core clock frequencies by +reading the Sample-At-Reset (SAR) register. The core clock consumer should +specify the desired clock by having the clock ID in its "clocks" phandle cell. + +The following is a list of provided IDs and clock names on Kirkwood and Dove: + 0 = tclk (Internal Bus clock) + 1 = cpuclk (CPU0 clock) + 2 = l2clk (L2 Cache clock derived from CPU0 clock) + 3 = ddrclk (DDR controller clock derived from CPU0 clock) + +The following is a list of provided IDs and clock names on 370/XP: + 0 = tclk (Internal Bus clock) + 1 = cpuclk (CPU clock) + 2 = nbclk (L2 Cache clock) + 3 = hclk (DRAM control clock) + 4 = dramclk (DDR clock) + +Required properties: +- compatible : shall be one of the following: + "marvell,dove-core-clocks" - for Dove SoC core clocks + "marvell,kirkwood-core-clocks" - for Kirkwood SoC (except mv88f6180) + "marvell,mv88f6180-core-clocks" - for Kirkwood MV88f6180 SoC + "marvell,370-core-clocks" - For 370 SoC core clocks + "marvell,xp-core-clocks" - For XP SoC core clocks +- reg : shall be the register address of the Sample-At-Reset (SAR) register +- #clock-cells : from common clock binding; shall be set to 1 + +Optional properties: +- clock-output-names : from common clock binding; allows overwrite default clock + output names ("tclk", "cpuclk", "l2clk", "ddrclk") + +Example: + +core_clk: core-clocks@d0214 { + compatible = "marvell,dove-core-clocks"; + reg = <0xd0214 0x4>; + #clock-cells = <1>; +}; + +spi0: spi@10600 { + compatible = "marvell,orion-spi"; + /* ... */ + /* get tclk from core clock provider */ + clocks = <&core_clk 0>; +}; diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index bace9e9..60427c0 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -54,3 +54,5 @@ config COMMON_CLK_MAX77686 This driver supports Maxim 77686 crystal oscillator clock. endmenu + +source "drivers/clk/mvebu/Kconfig" diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 71a25b9..d0a14ae 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_PLAT_SPEAR) += spear/ obj-$(CONFIG_ARCH_U300) += clk-u300.o obj-$(CONFIG_COMMON_CLK_VERSATILE) += versatile/ obj-$(CONFIG_ARCH_PRIMA2) += clk-prima2.o +obj-$(CONFIG_PLAT_ORION) += mvebu/ ifeq ($(CONFIG_COMMON_CLK), y) obj-$(CONFIG_ARCH_MMP) += mmp/ endif diff --git a/drivers/clk/mvebu/Kconfig b/drivers/clk/mvebu/Kconfig new file mode 100644 index 0000000..fd7bf97 --- /dev/null +++ b/drivers/clk/mvebu/Kconfig @@ -0,0 +1,3 @@ +config MVEBU_CLK_CORE + bool + diff --git a/drivers/clk/mvebu/Makefile b/drivers/clk/mvebu/Makefile new file mode 100644 index 0000000..de1d961 --- /dev/null +++ b/drivers/clk/mvebu/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_MVEBU_CLK_CORE) += clk.o clk-core.o diff --git a/drivers/clk/mvebu/clk-core.c b/drivers/clk/mvebu/clk-core.c new file mode 100644 index 0000000..26ba835 --- /dev/null +++ b/drivers/clk/mvebu/clk-core.c @@ -0,0 +1,675 @@ +/* + * Marvell EBU clock core handling defined at reset + * + * Copyright (C) 2012 Marvell + * + * Gregory CLEMENT + * Sebastian Hesselbarth + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include +#include +#include +#include +#include +#include +#include +#include "clk-core.h" + +struct core_ratio { + int id; + const char *name; +}; + +struct core_clocks { + u32 (*get_tclk_freq)(void __iomem *sar); + u32 (*get_cpu_freq)(void __iomem *sar); + void (*get_clk_ratio)(void __iomem *sar, int id, int *mult, int *div); + const struct core_ratio *ratios; + int num_ratios; +}; + +static struct clk_onecell_data clk_data; + +static void __init mvebu_clk_core_setup(struct device_node *np, + struct core_clocks *coreclk) +{ + const char *tclk_name = "tclk"; + const char *cpuclk_name = "cpuclk"; + void __iomem *base; + unsigned long rate; + int n; + + base = of_iomap(np, 0); + if (WARN_ON(!base)) + return; + + /* + * Allocate struct for TCLK, cpu clk, and core ratio clocks + */ + clk_data.clk_num = 2 + coreclk->num_ratios; + clk_data.clks = kzalloc(clk_data.clk_num * sizeof(struct clk *), + GFP_KERNEL); + if (WARN_ON(!clk_data.clks)) + return; + + /* + * Register TCLK + */ + of_property_read_string_index(np, "clock-output-names", 0, + &tclk_name); + rate = coreclk->get_tclk_freq(base); + clk_data.clks[0] = clk_register_fixed_rate(NULL, tclk_name, NULL, + CLK_IS_ROOT, rate); + WARN_ON(IS_ERR(clk_data.clks[0])); + + /* + * Register CPU clock + */ + of_property_read_string_index(np, "clock-output-names", 1, + &cpuclk_name); + rate = coreclk->get_cpu_freq(base); + clk_data.clks[1] = clk_register_fixed_rate(NULL, cpuclk_name, NULL, + CLK_IS_ROOT, rate); + WARN_ON(IS_ERR(clk_data.clks[1])); + + /* + * Register fixed-factor clocks derived from CPU clock + */ + for (n = 0; n < coreclk->num_ratios; n++) { + const char *rclk_name = coreclk->ratios[n].name; + int mult, div; + + of_property_read_string_index(np, "clock-output-names", + 2+n, &rclk_name); + coreclk->get_clk_ratio(base, coreclk->ratios[n].id, + &mult, &div); + clk_data.clks[2+n] = clk_register_fixed_factor(NULL, rclk_name, + cpuclk_name, 0, mult, div); + WARN_ON(IS_ERR(clk_data.clks[2+n])); + }; + + /* + * SAR register isn't needed anymore + */ + iounmap(base); + + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); +} + +#ifdef CONFIG_MACH_ARMADA_370_XP +/* + * 370/XP Sample At Reset is a 64 bit bitfiled split in two register + * of 32 bits + */ + +#define SARL 0 /* Low part [0:31] */ +#define SARL_AXP_PCLK_FREQ_OPT 21 +#define SARL_AXP_PCLK_FREQ_OPT_MASK 0x7 +#define SARL_A370_PCLK_FREQ_OPT 11 +#define SARL_A370_PCLK_FREQ_OPT_MASK 0xF +#define SARL_AXP_FAB_FREQ_OPT 24 +#define SARL_AXP_FAB_FREQ_OPT_MASK 0xF +#define SARL_A370_FAB_FREQ_OPT 15 +#define SARL_A370_FAB_FREQ_OPT_MASK 0x1F +#define SARL_A370_TCLK_FREQ_OPT 20 +#define SARL_A370_TCLK_FREQ_OPT_MASK 0x1 +#define SARH 4 /* High part [32:63] */ +#define SARH_AXP_PCLK_FREQ_OPT (52-32) +#define SARH_AXP_PCLK_FREQ_OPT_MASK 0x1 +#define SARH_AXP_PCLK_FREQ_OPT_SHIFT 3 +#define SARH_AXP_FAB_FREQ_OPT (51-32) +#define SARH_AXP_FAB_FREQ_OPT_MASK 0x1 +#define SARH_AXP_FAB_FREQ_OPT_SHIFT 4 + +static const u32 __initconst a370_tclk_frequencies[] = { + 16600000, + 20000000, +}; + +static u32 __init a370_get_tclk_freq(void __iomem *sar) +{ + u8 tclk_freq_select = 0; + + tclk_freq_select = ((readl(sar) >> SARL_A370_TCLK_FREQ_OPT) & + SARL_A370_TCLK_FREQ_OPT_MASK); + return a370_tclk_frequencies[tclk_freq_select]; +} + +static const u32 __initconst a370_cpu_frequencies[] = { + 400000000, + 533000000, + 667000000, + 800000000, + 1000000000, + 1067000000, + 1200000000, +}; + +static u32 __init a370_get_cpu_freq(void __iomem *sar) +{ + u32 cpu_freq; + u8 cpu_freq_select = 0; + + cpu_freq_select = ((readl(sar) >> SARL_A370_PCLK_FREQ_OPT) & + SARL_A370_PCLK_FREQ_OPT_MASK); + if (cpu_freq_select > ARRAY_SIZE(a370_cpu_frequencies)) { + pr_err("CPU freq select unsuported %d\n", cpu_freq_select); + cpu_freq = 0; + } else + cpu_freq = a370_cpu_frequencies[cpu_freq_select]; + + return cpu_freq; +} + +enum { A370_XP_NBCLK, A370_XP_HCLK, A370_XP_DRAMCLK }; + +static const struct core_ratio __initconst a370_xp_core_ratios[] = { + { .id = A370_XP_NBCLK, .name = "nbclk" }, + { .id = A370_XP_HCLK, .name = "hclk" }, + { .id = A370_XP_DRAMCLK, .name = "dramclk" }, +}; + +static const int __initconst a370_xp_nbclk_ratios[32][2] = { + {0, 1}, {1, 2}, {2, 2}, {2, 2}, + {1, 2}, {1, 2}, {1, 1}, {2, 3}, + {0, 1}, {1, 2}, {2, 4}, {0, 1}, + {1, 2}, {0, 1}, {0, 1}, {2, 2}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {2, 3}, {0, 1}, {0, 1}, {0, 1}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {0, 1}, {0, 1}, {0, 1}, {0, 1}, +}; + +static const int __initconst a370_xp_hclk_ratios[32][2] = { + {0, 1}, {1, 2}, {2, 6}, {2, 3}, + {1, 3}, {1, 4}, {1, 2}, {2, 6}, + {0, 1}, {1, 6}, {2, 10}, {0, 1}, + {1, 4}, {0, 1}, {0, 1}, {2, 5}, + {0, 1}, {0, 1}, {0, 1}, {1, 2}, + {2, 6}, {0, 1}, {0, 1}, {0, 1}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {0, 1}, {0, 1}, {0, 1}, {0, 1}, +}; + +static const int __initconst a370_xp_dramclk_ratios[32][2] = { + {0, 1}, {1, 2}, {2, 3}, {2, 3}, + {1, 3}, {1, 2}, {1, 2}, {2, 6}, + {0, 1}, {1, 3}, {2, 5}, {0, 1}, + {1, 4}, {0, 1}, {0, 1}, {2, 5}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {2, 3}, {0, 1}, {0, 1}, {0, 1}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {0, 1}, {0, 1}, {0, 1}, {0, 1}, +}; + +static void __init a370_xp_get_clk_ratio(u32 opt, + void __iomem *sar, int id, int *mult, int *div) +{ + switch (id) { + case A370_XP_NBCLK: + *mult = a370_xp_nbclk_ratios[opt][0]; + *div = a370_xp_nbclk_ratios[opt][1]; + break; + case A370_XP_HCLK: + *mult = a370_xp_hclk_ratios[opt][0]; + *div = a370_xp_hclk_ratios[opt][1]; + break; + case A370_XP_DRAMCLK: + *mult = a370_xp_dramclk_ratios[opt][0]; + *div = a370_xp_dramclk_ratios[opt][1]; + break; + } +} + +static void __init a370_get_clk_ratio( + void __iomem *sar, int id, int *mult, int *div) +{ + u32 opt = ((readl(sar) >> SARL_A370_FAB_FREQ_OPT) & + SARL_A370_FAB_FREQ_OPT_MASK); + + a370_xp_get_clk_ratio(opt, sar, id, mult, div); +} + + +static const struct core_clocks a370_core_clocks = { + .get_tclk_freq = a370_get_tclk_freq, + .get_cpu_freq = a370_get_cpu_freq, + .get_clk_ratio = a370_get_clk_ratio, + .ratios = a370_xp_core_ratios, + .num_ratios = ARRAY_SIZE(a370_xp_core_ratios), +}; + +static const u32 __initconst xp_cpu_frequencies[] = { + 1000000000, + 1066000000, + 1200000000, + 1333000000, + 1500000000, + 1666000000, + 1800000000, + 2000000000, + 667000000, + 0, + 800000000, + 1600000000, +}; + +/* For Armada XP TCLK frequency is fix: 250MHz */ +static u32 __init xp_get_tclk_freq(void __iomem *sar) +{ + return 250 * 1000 * 1000; +} + +static u32 __init xp_get_cpu_freq(void __iomem *sar) +{ + u32 cpu_freq; + u8 cpu_freq_select = 0; + + cpu_freq_select = ((readl(sar) >> SARL_AXP_PCLK_FREQ_OPT) & + SARL_AXP_PCLK_FREQ_OPT_MASK); + /* + * The upper bit is not contiguous to the other ones and + * located in the high part of the SAR registers + */ + cpu_freq_select |= (((readl(sar+4) >> SARH_AXP_PCLK_FREQ_OPT) & + SARH_AXP_PCLK_FREQ_OPT_MASK) + << SARH_AXP_PCLK_FREQ_OPT_SHIFT); + if (cpu_freq_select > ARRAY_SIZE(xp_cpu_frequencies)) { + pr_err("CPU freq select unsuported: %d\n", cpu_freq_select); + cpu_freq = 0; + } else + cpu_freq = xp_cpu_frequencies[cpu_freq_select]; + + return cpu_freq; +} + +static void __init xp_get_clk_ratio( + void __iomem *sar, int id, int *mult, int *div) +{ + + u32 opt = ((readl(sar) >> SARL_AXP_FAB_FREQ_OPT) & + SARL_AXP_FAB_FREQ_OPT_MASK); + /* + * The upper bit is not contiguous to the other ones and + * located in the high part of the SAR registers + */ + opt |= (((readl(sar+4) >> SARH_AXP_FAB_FREQ_OPT) & + SARH_AXP_FAB_FREQ_OPT_MASK) + << SARH_AXP_FAB_FREQ_OPT_SHIFT); + + a370_xp_get_clk_ratio(opt, sar, id, mult, div); +} + +static const struct core_clocks xp_core_clocks = { + .get_tclk_freq = xp_get_tclk_freq, + .get_cpu_freq = xp_get_cpu_freq, + .get_clk_ratio = xp_get_clk_ratio, + .ratios = a370_xp_core_ratios, + .num_ratios = ARRAY_SIZE(a370_xp_core_ratios), +}; + +#endif /* CONFIG_MACH_ARMADA_370_XP */ + +/* + * Dove PLL sample-at-reset configuration + * + * SAR0[8:5] : CPU frequency + * 5 = 1000 MHz + * 6 = 933 MHz + * 7 = 933 MHz + * 8 = 800 MHz + * 9 = 800 MHz + * 10 = 800 MHz + * 11 = 1067 MHz + * 12 = 667 MHz + * 13 = 533 MHz + * 14 = 400 MHz + * 15 = 333 MHz + * others reserved. + * + * SAR0[11:9] : CPU to L2 Clock divider ratio + * 0 = (1/1) * CPU + * 2 = (1/2) * CPU + * 4 = (1/3) * CPU + * 6 = (1/4) * CPU + * others reserved. + * + * SAR0[15:12] : CPU to DDR DRAM Clock divider ratio + * 0 = (1/1) * CPU + * 2 = (1/2) * CPU + * 3 = (2/5) * CPU + * 4 = (1/3) * CPU + * 6 = (1/4) * CPU + * 8 = (1/5) * CPU + * 10 = (1/6) * CPU + * 12 = (1/7) * CPU + * 14 = (1/8) * CPU + * 15 = (1/10) * CPU + * others reserved. + * + * SAR0[24:23] : TCLK frequency + * 0 = 166 MHz + * 1 = 125 MHz + * others reserved. + */ +#ifdef CONFIG_ARCH_DOVE +#define SAR_DOVE_CPU_FREQ 5 +#define SAR_DOVE_CPU_FREQ_MASK 0xf +#define SAR_DOVE_L2_RATIO 9 +#define SAR_DOVE_L2_RATIO_MASK 0x7 +#define SAR_DOVE_DDR_RATIO 12 +#define SAR_DOVE_DDR_RATIO_MASK 0xf +#define SAR_DOVE_TCLK_FREQ 23 +#define SAR_DOVE_TCLK_FREQ_MASK 0x3 + +static const u32 __initconst dove_tclk_frequencies[] = { + 166666667, + 125000000, + 0, 0 +}; + +static u32 __init dove_get_tclk_freq(void __iomem *sar) +{ + u32 opt = (readl(sar) >> SAR_DOVE_TCLK_FREQ) & + SAR_DOVE_TCLK_FREQ_MASK; + return dove_tclk_frequencies[opt]; +} + +static const u32 __initconst dove_cpu_frequencies[] = { + 0, 0, 0, 0, 0, + 1000000000, + 933333333, 933333333, + 800000000, 800000000, 800000000, + 1066666667, + 666666667, + 533333333, + 400000000, + 333333333 +}; + +static u32 __init dove_get_cpu_freq(void __iomem *sar) +{ + u32 opt = (readl(sar) >> SAR_DOVE_CPU_FREQ) & + SAR_DOVE_CPU_FREQ_MASK; + return dove_cpu_frequencies[opt]; +} + +enum { DOVE_CPU_TO_L2, DOVE_CPU_TO_DDR }; + +static const struct core_ratio __initconst dove_core_ratios[] = { + { .id = DOVE_CPU_TO_L2, .name = "l2clk", }, + { .id = DOVE_CPU_TO_DDR, .name = "ddrclk", } +}; + +static const int __initconst dove_cpu_l2_ratios[8][2] = { + { 1, 1 }, { 0, 1 }, { 1, 2 }, { 0, 1 }, + { 1, 3 }, { 0, 1 }, { 1, 4 }, { 0, 1 } +}; + +static const int __initconst dove_cpu_ddr_ratios[16][2] = { + { 1, 1 }, { 0, 1 }, { 1, 2 }, { 2, 5 }, + { 1, 3 }, { 0, 1 }, { 1, 4 }, { 0, 1 }, + { 1, 5 }, { 0, 1 }, { 1, 6 }, { 0, 1 }, + { 1, 7 }, { 0, 1 }, { 1, 8 }, { 1, 10 } +}; + +static void __init dove_get_clk_ratio( + void __iomem *sar, int id, int *mult, int *div) +{ + switch (id) { + case DOVE_CPU_TO_L2: + { + u32 opt = (readl(sar) >> SAR_DOVE_L2_RATIO) & + SAR_DOVE_L2_RATIO_MASK; + *mult = dove_cpu_l2_ratios[opt][0]; + *div = dove_cpu_l2_ratios[opt][1]; + break; + } + case DOVE_CPU_TO_DDR: + { + u32 opt = (readl(sar) >> SAR_DOVE_DDR_RATIO) & + SAR_DOVE_DDR_RATIO_MASK; + *mult = dove_cpu_ddr_ratios[opt][0]; + *div = dove_cpu_ddr_ratios[opt][1]; + break; + } + } +} + +static const struct core_clocks dove_core_clocks = { + .get_tclk_freq = dove_get_tclk_freq, + .get_cpu_freq = dove_get_cpu_freq, + .get_clk_ratio = dove_get_clk_ratio, + .ratios = dove_core_ratios, + .num_ratios = ARRAY_SIZE(dove_core_ratios), +}; +#endif /* CONFIG_ARCH_DOVE */ + +/* + * Kirkwood PLL sample-at-reset configuration + * (6180 has different SAR layout than other Kirkwood SoCs) + * + * SAR0[4:3,22,1] : CPU frequency (6281,6292,6282) + * 4 = 600 MHz + * 6 = 800 MHz + * 7 = 1000 MHz + * 9 = 1200 MHz + * 12 = 1500 MHz + * 13 = 1600 MHz + * 14 = 1800 MHz + * 15 = 2000 MHz + * others reserved. + * + * SAR0[19,10:9] : CPU to L2 Clock divider ratio (6281,6292,6282) + * 1 = (1/2) * CPU + * 3 = (1/3) * CPU + * 5 = (1/4) * CPU + * others reserved. + * + * SAR0[8:5] : CPU to DDR DRAM Clock divider ratio (6281,6292,6282) + * 2 = (1/2) * CPU + * 4 = (1/3) * CPU + * 6 = (1/4) * CPU + * 7 = (2/9) * CPU + * 8 = (1/5) * CPU + * 9 = (1/6) * CPU + * others reserved. + * + * SAR0[4:2] : Kirkwood 6180 cpu/l2/ddr clock configuration (6180 only) + * 5 = [CPU = 600 MHz, L2 = (1/2) * CPU, DDR = 200 MHz = (1/3) * CPU] + * 6 = [CPU = 800 MHz, L2 = (1/2) * CPU, DDR = 200 MHz = (1/4) * CPU] + * 7 = [CPU = 1000 MHz, L2 = (1/2) * CPU, DDR = 200 MHz = (1/5) * CPU] + * others reserved. + * + * SAR0[21] : TCLK frequency + * 0 = 200 MHz + * 1 = 166 MHz + * others reserved. + */ +#ifdef CONFIG_ARCH_KIRKWOOD +#define SAR_KIRKWOOD_CPU_FREQ(x) \ + (((x & (1 << 1)) >> 1) | \ + ((x & (1 << 22)) >> 21) | \ + ((x & (3 << 3)) >> 1)) +#define SAR_KIRKWOOD_L2_RATIO(x) \ + (((x & (3 << 9)) >> 9) | \ + (((x & (1 << 19)) >> 17))) +#define SAR_KIRKWOOD_DDR_RATIO 5 +#define SAR_KIRKWOOD_DDR_RATIO_MASK 0xf +#define SAR_MV88F6180_CLK 2 +#define SAR_MV88F6180_CLK_MASK 0x7 +#define SAR_KIRKWOOD_TCLK_FREQ 21 +#define SAR_KIRKWOOD_TCLK_FREQ_MASK 0x1 + +enum { KIRKWOOD_CPU_TO_L2, KIRKWOOD_CPU_TO_DDR }; + +static const struct core_ratio __initconst kirkwood_core_ratios[] = { + { .id = KIRKWOOD_CPU_TO_L2, .name = "l2clk", }, + { .id = KIRKWOOD_CPU_TO_DDR, .name = "ddrclk", } +}; + +static u32 __init kirkwood_get_tclk_freq(void __iomem *sar) +{ + u32 opt = (readl(sar) >> SAR_KIRKWOOD_TCLK_FREQ) & + SAR_KIRKWOOD_TCLK_FREQ_MASK; + return (opt) ? 166666667 : 200000000; +} + +static const u32 __initconst kirkwood_cpu_frequencies[] = { + 0, 0, 0, 0, + 600000000, + 0, + 800000000, + 1000000000, + 0, + 1200000000, + 0, 0, + 1500000000, + 1600000000, + 1800000000, + 2000000000 +}; + +static u32 __init kirkwood_get_cpu_freq(void __iomem *sar) +{ + u32 opt = SAR_KIRKWOOD_CPU_FREQ(readl(sar)); + return kirkwood_cpu_frequencies[opt]; +} + +static const int __initconst kirkwood_cpu_l2_ratios[8][2] = { + { 0, 1 }, { 1, 2 }, { 0, 1 }, { 1, 3 }, + { 0, 1 }, { 1, 4 }, { 0, 1 }, { 0, 1 } +}; + +static const int __initconst kirkwood_cpu_ddr_ratios[16][2] = { + { 0, 1 }, { 0, 1 }, { 1, 2 }, { 0, 1 }, + { 1, 3 }, { 0, 1 }, { 1, 4 }, { 2, 9 }, + { 1, 5 }, { 1, 6 }, { 0, 1 }, { 0, 1 }, + { 0, 1 }, { 0, 1 }, { 0, 1 }, { 0, 1 } +}; + +static void __init kirkwood_get_clk_ratio( + void __iomem *sar, int id, int *mult, int *div) +{ + switch (id) { + case KIRKWOOD_CPU_TO_L2: + { + u32 opt = SAR_KIRKWOOD_L2_RATIO(readl(sar)); + *mult = kirkwood_cpu_l2_ratios[opt][0]; + *div = kirkwood_cpu_l2_ratios[opt][1]; + break; + } + case KIRKWOOD_CPU_TO_DDR: + { + u32 opt = (readl(sar) >> SAR_KIRKWOOD_DDR_RATIO) & + SAR_KIRKWOOD_DDR_RATIO_MASK; + *mult = kirkwood_cpu_ddr_ratios[opt][0]; + *div = kirkwood_cpu_ddr_ratios[opt][1]; + break; + } + } +} + +static const struct core_clocks kirkwood_core_clocks = { + .get_tclk_freq = kirkwood_get_tclk_freq, + .get_cpu_freq = kirkwood_get_cpu_freq, + .get_clk_ratio = kirkwood_get_clk_ratio, + .ratios = kirkwood_core_ratios, + .num_ratios = ARRAY_SIZE(kirkwood_core_ratios), +}; + +static const u32 __initconst mv88f6180_cpu_frequencies[] = { + 0, 0, 0, 0, 0, + 600000000, + 800000000, + 1000000000 +}; + +static u32 __init mv88f6180_get_cpu_freq(void __iomem *sar) +{ + u32 opt = (readl(sar) >> SAR_MV88F6180_CLK) & SAR_MV88F6180_CLK_MASK; + return mv88f6180_cpu_frequencies[opt]; +} + +static const int __initconst mv88f6180_cpu_ddr_ratios[8][2] = { + { 0, 1 }, { 0, 1 }, { 0, 1 }, { 0, 1 }, + { 0, 1 }, { 1, 3 }, { 1, 4 }, { 1, 5 } +}; + +static void __init mv88f6180_get_clk_ratio( + void __iomem *sar, int id, int *mult, int *div) +{ + switch (id) { + case KIRKWOOD_CPU_TO_L2: + { + /* mv88f6180 has a fixed 1:2 CPU-to-L2 ratio */ + *mult = 1; + *div = 2; + break; + } + case KIRKWOOD_CPU_TO_DDR: + { + u32 opt = (readl(sar) >> SAR_MV88F6180_CLK) & + SAR_MV88F6180_CLK_MASK; + *mult = mv88f6180_cpu_ddr_ratios[opt][0]; + *div = mv88f6180_cpu_ddr_ratios[opt][1]; + break; + } + } +} + +static const struct core_clocks mv88f6180_core_clocks = { + .get_tclk_freq = kirkwood_get_tclk_freq, + .get_cpu_freq = mv88f6180_get_cpu_freq, + .get_clk_ratio = mv88f6180_get_clk_ratio, + .ratios = kirkwood_core_ratios, + .num_ratios = ARRAY_SIZE(kirkwood_core_ratios), +}; +#endif /* CONFIG_ARCH_KIRKWOOD */ + +static const __initdata struct of_device_id clk_core_match[] = { +#ifdef CONFIG_MACH_ARMADA_370_XP + { + .compatible = "marvell,370-core-clocks", + .data = &a370_core_clocks, + }, + { + .compatible = "marvell,xp-core-clocks", + .data = &xp_core_clocks, + }, +#endif +#ifdef CONFIG_ARCH_DOVE + { + .compatible = "marvell,dove-core-clocks", + .data = &dove_core_clocks, + }, +#endif + +#ifdef CONFIG_ARCH_KIRKWOOD + { + .compatible = "marvell,kirkwood-core-clocks", + .data = &kirkwood_core_clocks, + }, + { + .compatible = "marvell,mv88f6180-core-clocks", + .data = &mv88f6180_core_clocks, + }, +#endif + + { } +}; + +void __init mvebu_core_clk_init(void) +{ + struct device_node *np; + + for_each_matching_node(np, clk_core_match) { + const struct of_device_id *match = + of_match_node(clk_core_match, np); + mvebu_clk_core_setup(np, (struct core_clocks *)match->data); + } +} diff --git a/drivers/clk/mvebu/clk-core.h b/drivers/clk/mvebu/clk-core.h new file mode 100644 index 0000000..28b5e02 --- /dev/null +++ b/drivers/clk/mvebu/clk-core.h @@ -0,0 +1,18 @@ +/* + * * Marvell EBU clock core handling defined at reset + * + * Copyright (C) 2012 Marvell + * + * Gregory CLEMENT + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MVEBU_CLK_CORE_H +#define __MVEBU_CLK_CORE_H + +void __init mvebu_core_clk_init(void); + +#endif diff --git a/drivers/clk/mvebu/clk.c b/drivers/clk/mvebu/clk.c new file mode 100644 index 0000000..e6742ac --- /dev/null +++ b/drivers/clk/mvebu/clk.c @@ -0,0 +1,23 @@ +/* + * Marvell EBU SoC clock handling. + * + * Copyright (C) 2012 Marvell + * + * Gregory CLEMENT + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include +#include +#include +#include +#include +#include +#include "clk-core.h" + +void __init mvebu_clocks_init(void) +{ + mvebu_core_clk_init(); +} diff --git a/include/linux/clk/mvebu.h b/include/linux/clk/mvebu.h new file mode 100644 index 0000000..8c4ae71 --- /dev/null +++ b/include/linux/clk/mvebu.h @@ -0,0 +1,22 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __CLK_MVEBU_H_ +#define __CLK_MVEBU_H_ + +void __init mvebu_clocks_init(void); + +#endif