From patchwork Sat Nov 17 08:51:04 2012 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Andrew Lunn X-Patchwork-Id: 1758761 Return-Path: X-Original-To: patchwork-linux-arm@patchwork.kernel.org Delivered-To: patchwork-process-083081@patchwork2.kernel.org Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) by patchwork2.kernel.org (Postfix) with ESMTP id B820BDF2A2 for ; Sat, 17 Nov 2012 08:53:32 +0000 (UTC) Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.76 #1 (Red Hat Linux)) id 1TZe81-0002Ug-Ge; Sat, 17 Nov 2012 08:51:53 +0000 Received: from londo.lunn.ch ([2001:1620:f9f:1000::1]) by merlin.infradead.org with esmtp (Exim 4.76 #1 (Red Hat Linux)) id 1TZe7p-0002Sp-PX for linux-arm-kernel@lists.infradead.org; Sat, 17 Nov 2012 08:51:44 +0000 Received: from lunn by londo.lunn.ch with local (Exim 3.36 #1 (Debian)) id 1TZe7K-0000Lf-00; Sat, 17 Nov 2012 09:51:10 +0100 From: Andrew Lunn To: anton.vorontsov@linaro.org, Jason Cooper Subject: [PATCH v3 1/3] power: Add simple poweroff-gpio driver Date: Sat, 17 Nov 2012 09:51:04 +0100 Message-Id: <1353142266-1289-2-git-send-email-andrew@lunn.ch> X-Mailer: git-send-email 1.7.10.4 In-Reply-To: <1353142266-1289-1-git-send-email-andrew@lunn.ch> References: <1353142266-1289-1-git-send-email-andrew@lunn.ch> X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20121117_035142_396737_42737E8F X-CRM114-Status: GOOD ( 24.44 ) X-Spam-Score: -2.6 (--) X-Spam-Report: SpamAssassin version 3.3.2 on merlin.infradead.org summary: Content analysis details: (-2.6 points) pts rule name description ---- ---------------------- -------------------------------------------------- -0.0 SPF_HELO_PASS SPF: HELO matches SPF record -0.0 SPF_PASS SPF: sender matches SPF record -0.7 RP_MATCHES_RCVD Envelope sender domain matches handover relay domain -1.9 BAYES_00 BODY: Bayes spam probability is 0 to 1% [score: 0.0000] Cc: Andrew Lunn , gmbnomis@gmail.com, Linus Walleij , jm@lentin.co.uk, devicetree-discuss@lists.ozlabs.org, linux ARM X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Sender: linux-arm-kernel-bounces@lists.infradead.org Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org From: Jamie Lentin Given appropriate devicetree bindings, this driver registers a pm_power_off function to set a GPIO line high/low to power down your board. Signed-off-by: Jamie Lentin Signed-off-by: Andrew Lunn Tested-by:Simon Baatz --- .../devicetree/bindings/gpio/gpio-poweroff.txt | 22 ++++ drivers/power/Kconfig | 3 + drivers/power/Makefile | 1 + drivers/power/reset/Kconfig | 15 +++ drivers/power/reset/Makefile | 1 + drivers/power/reset/gpio-poweroff.c | 129 ++++++++++++++++++++ 6 files changed, 171 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-poweroff.txt create mode 100644 drivers/power/reset/Kconfig create mode 100644 drivers/power/reset/Makefile create mode 100644 drivers/power/reset/gpio-poweroff.c diff --git a/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt b/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt new file mode 100644 index 0000000..558cdf3 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt @@ -0,0 +1,22 @@ +GPIO line that should be set high/low to power off a device + +Required properties: +- compatible : should be "gpio-poweroff". +- gpios : The GPIO to set high/low, see "gpios property" in + Documentation/devicetree/bindings/gpio/gpio.txt. If the pin should be + low to power down the board set it to "Active Low", otherwise set + gpio to "Active High". + +Optional properties: +- input : Initially configure the GPIO line as an input. Only reconfigure + it to an output when the pm_power_off function is called. If this optional + property is not specified, the GPIO is initialized as an output in its + inactive state. + + +Examples: + +gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio 4 0>; /* GPIO 4 Active Low */ +}; diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 49a8939..b1d956d 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -335,6 +335,9 @@ config AB8500_BATTERY_THERM_ON_BATCTRL help Say Y to enable battery temperature measurements using thermistor connected on BATCTRL ADC. + +source "drivers/power/reset/Kconfig" + endif # POWER_SUPPLY source "drivers/power/avs/Kconfig" diff --git a/drivers/power/Makefile b/drivers/power/Makefile index b949cf8..f1d99f4 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -49,3 +49,4 @@ obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o obj-$(CONFIG_POWER_AVS) += avs/ obj-$(CONFIG_CHARGER_SMB347) += smb347-charger.o +obj-$(CONFIG_POWER_RESET) += reset/ diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig new file mode 100644 index 0000000..6461b48 --- /dev/null +++ b/drivers/power/reset/Kconfig @@ -0,0 +1,15 @@ +menuconfig POWER_RESET + bool "Board level reset or power off" + help + Provides a number of drivers which either reset a complete board + or shut it down, by manipulating the main power supply on the board. + + Say Y here to enable board reset and power off + +config POWER_RESET_GPIO + bool "GPIO power-off driver" + depends on OF_GPIO && POWER_RESET + help + This driver supports turning off your board via a GPIO line. + If your board needs a GPIO high/low to power down, say Y and + create a binding in your devicetree. diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile new file mode 100644 index 0000000..751488a --- /dev/null +++ b/drivers/power/reset/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o diff --git a/drivers/power/reset/gpio-poweroff.c b/drivers/power/reset/gpio-poweroff.c new file mode 100644 index 0000000..0491e53 --- /dev/null +++ b/drivers/power/reset/gpio-poweroff.c @@ -0,0 +1,129 @@ +/* + * Toggles a GPIO pin to power down a device + * + * Jamie Lentin + * Andrew Lunn + * + * Copyright (C) 2012 Jamie Lentin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Hold configuration here, cannot be more than one instance of the driver + * since pm_power_off itself is global. + */ +static int gpio_num = -1; +static int gpio_active_low; + +static void gpio_poweroff_do_poweroff(void) +{ + BUG_ON(gpio_num == -1); + + /* drive it active */ + gpio_direction_output(gpio_num, !gpio_active_low); + mdelay(100); + /* rising edge or drive inactive */ + gpio_set_value(gpio_num, gpio_active_low); + mdelay(100); + /* falling edge */ + gpio_set_value(gpio_num, !gpio_active_low); + + /* give it some time */ + mdelay(3000); + + WARN_ON(1); +} + +static int __devinit gpio_poweroff_probe(struct platform_device *pdev) +{ + enum of_gpio_flags flags; + bool input = false; + int ret; + + /* If a pm_power_off function has already been added, leave it alone */ + if (pm_power_off != NULL) { + pr_err("%s: pm_power_off function already registered", + __func__); + return -EBUSY; + } + + gpio_num = of_get_gpio_flags(pdev->dev.of_node, 0, &flags); + if (gpio_num < 0) { + pr_err("%s: Could not get GPIO configuration: %d", + __func__, gpio_num); + return -ENODEV; + } + gpio_active_low = flags & OF_GPIO_ACTIVE_LOW; + + if (of_get_property(pdev->dev.of_node, "input", NULL)) + input = true; + + ret = gpio_request(gpio_num, "poweroff-gpio"); + if (ret) { + pr_err("%s: Could not get GPIO %d", __func__, gpio_num); + return ret; + } + if (input) { + if (gpio_direction_input(gpio_num)) { + pr_err("Could not set direction of GPIO %d to input", + gpio_num); + goto err; + } + } else { + if (gpio_direction_output(gpio_num, gpio_active_low)) { + pr_err("Could not set direction of GPIO %d", gpio_num); + goto err; + } + } + + pm_power_off = &gpio_poweroff_do_poweroff; + return 0; + +err: + gpio_free(gpio_num); + return -ENODEV; +} + +static int __devexit gpio_poweroff_remove(struct platform_device *pdev) +{ + if (gpio_num != -1) + gpio_free(gpio_num); + if (pm_power_off == &gpio_poweroff_do_poweroff) + pm_power_off = NULL; + + return 0; +} + +static const struct of_device_id of_gpio_poweroff_match[] = { + { .compatible = "gpio-poweroff", }, + {}, +}; + +static struct platform_driver gpio_poweroff_driver = { + .probe = gpio_poweroff_probe, + .remove = __devexit_p(gpio_poweroff_remove), + .driver = { + .name = "poweroff-gpio", + .owner = THIS_MODULE, + .of_match_table = of_gpio_poweroff_match, + }, +}; + +module_platform_driver(gpio_poweroff_driver); + +MODULE_AUTHOR("Jamie Lentin "); +MODULE_DESCRIPTION("GPIO poweroff driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:poweroff-gpio");