| Message ID | 1353702249-4589-1-git-send-email-iwamatsu@nigauri.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts index 37dc3a7..e303169 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts @@ -75,4 +75,23 @@ }; }; }; + + gpio-leds { + compatible = "gpio-leds"; + + led-red { + label = "obsa6:red:stat"; + gpios = <&gpio1 9 1>; + }; + + led-green { + label = "obsa6:green:stat"; + gpios = <&gpio1 10 1>; + }; + + led-yellow { + label = "obsa6:yellow:stat"; + gpios = <&gpio1 11 1>; + }; + }; }; diff --git a/arch/arm/mach-kirkwood/board-openblocks_a6.c b/arch/arm/mach-kirkwood/board-openblocks_a6.c index e71f984..815fc64 100644 --- a/arch/arm/mach-kirkwood/board-openblocks_a6.c +++ b/arch/arm/mach-kirkwood/board-openblocks_a6.c @@ -55,8 +55,8 @@ static unsigned int openblocks_a6_mpp_config[] __initdata = { MPP38_GPIO, /* INIT */ MPP39_GPIO, /* USB OC */ MPP41_GPIO, /* LED: Red */ - MPP42_GPIO, /* LED: Yellow */ - MPP43_GPIO, /* LED: Green */ + MPP42_GPIO, /* LED: Green */ + MPP43_GPIO, /* LED: Yellow */ 0, };
OpenBlocks A6 has three leds via GPIO. This supports them. And this fix typo about led, because hardware manual has typo. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> --- v2: Use gpio-leds, not gpio_leds. arch/arm/boot/dts/kirkwood-openblocks_a6.dts | 19 +++++++++++++++++++ arch/arm/mach-kirkwood/board-openblocks_a6.c | 4 ++-- 2 files changed, 21 insertions(+), 2 deletions(-)