@@ -38,7 +38,6 @@
#define GPIO_NR_TREO_LCD_POWER 25
/* Treo680 specific GPIOs */
-#ifdef CONFIG_MACH_TREO680
#define GPIO_NR_TREO680_SD_READONLY 33
#define GPIO_NR_TREO680_SD_POWER 42
#define GPIO_NR_TREO680_VIBRATE_EN 44
@@ -47,7 +46,6 @@
#define GPIO_NR_TREO680_LCD_POWER 77
#define GPIO_NR_TREO680_LCD_EN 86
#define GPIO_NR_TREO680_LCD_EN_N 25
-#endif /* CONFIG_MACH_TREO680 */
/* Centro685 specific GPIOs */
#define GPIO_NR_CENTRO_SD_POWER 21
@@ -334,7 +334,6 @@ static inline void palmtreo_uhc_init(void) {}
/******************************************************************************
* Vibra and LEDs
******************************************************************************/
-#ifdef CONFIG_MACH_TREO680
static struct gpio_led treo680_gpio_leds[] = {
{
.name = "treo680:vibra:vibra",
@@ -385,21 +384,17 @@ static struct gpio_led_platform_data centro_gpio_led_info = {
static struct platform_device palmtreo_leds = {
.name = "leds-gpio",
.id = -1,
- .dev = {
- .platform_data = &treo680_gpio_led_info,
- }
};
static void __init palmtreo_leds_init(void)
{
if (machine_is_centro())
palmtreo_leds.dev.platform_data = ¢ro_gpio_led_info;
+ else if (machine_is_treo680())
+ palmtreo_leds.dev.platform_data = &treo680_gpio_led_info;
platform_device_register(&palmtreo_leds);
}
-#else
-static inline void palmtreo_leds_init(void) {}
-#endif
/******************************************************************************
* Machine init
The #ifdefs around the leds-gpio device platform data are erroneous. Currently the device is not instantiated on the centro unless CONFIG_MACH_TREO680 is defined. This patch eliminates the #ifdefs, and uses the machine_is_* macros to initialize the data based on which machine the code is running on and the build-time configuration. Unused data is optimized out by the build tools if build configuration does not enable support for both machines. Tested on my palm treo 680, and compile-tested for all three combinations of treo680/centro build configurations. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> --- arch/arm/mach-pxa/include/mach/palmtreo.h | 2 -- arch/arm/mach-pxa/palmtreo.c | 9 ++------- 2 files changed, 2 insertions(+), 9 deletions(-)