@@ -3041,11 +3041,8 @@ static int _am33xx_assert_hardreset(struct omap_hwmod *oh,
static int _am33xx_deassert_hardreset(struct omap_hwmod *oh,
struct omap_hwmod_rst_info *ohri)
{
- if (ohri->st_shift)
- pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n",
- oh->name, ohri->name);
-
return am33xx_prm_deassert_hardreset(ohri->rst_shift,
+ ohri->st_shift,
oh->clkdm->pwrdm.ptr->prcm_offs,
oh->prcm.omap4.rstctrl_offs,
oh->prcm.omap4.rstst_offs);
@@ -110,11 +110,11 @@ int am33xx_prm_assert_hardreset(u8 shift, s16 inst, u16 rstctrl_offs)
* -EINVAL upon an argument error, -EEXIST if the submodule was already out
* of reset, or -EBUSY if the submodule did not exit reset promptly.
*/
-int am33xx_prm_deassert_hardreset(u8 shift, s16 inst,
+int am33xx_prm_deassert_hardreset(u8 shift, u8 st_shift, s16 inst,
u16 rstctrl_offs, u16 rstst_offs)
{
int c;
- u32 mask = 1 << shift;
+ u32 mask = 1 << st_shift;
/* Check the current status to avoid de-asserting the line twice */
if (am33xx_prm_is_hardreset_asserted(shift, inst, rstctrl_offs) == 0)
@@ -122,11 +122,14 @@ int am33xx_prm_deassert_hardreset(u8 shift, s16 inst,
/* Clear the reset status by writing 1 to the status bit */
am33xx_prm_rmw_reg_bits(0xffffffff, mask, inst, rstst_offs);
+
/* de-assert the reset control line */
+ mask = 1 << shift;
+
am33xx_prm_rmw_reg_bits(mask, 0, inst, rstctrl_offs);
- /* wait the status to be set */
- omap_test_timeout(am33xx_prm_is_hardreset_asserted(shift, inst,
+ /* wait the status to be set */
+ omap_test_timeout(am33xx_prm_is_hardreset_asserted(st_shift, inst,
rstst_offs),
MAX_MODULE_HARDRESET_WAIT, c);
@@ -125,7 +125,7 @@ extern void am33xx_prm_global_warm_sw_reset(void);
extern int am33xx_prm_is_hardreset_asserted(u8 shift, s16 inst,
u16 rstctrl_offs);
extern int am33xx_prm_assert_hardreset(u8 shift, s16 inst, u16 rstctrl_offs);
-extern int am33xx_prm_deassert_hardreset(u8 shift, s16 inst,
+extern int am33xx_prm_deassert_hardreset(u8 shift, u8 st_shift, s16 inst,
u16 rstctrl_offs, u16 rstst_offs);
#endif /* ASSEMBLER */
WKUP-M3 has a reset status bit (RM_WKUP_STST.WKUP_M3_LRST) Update the hardreset API to ensure that the reset line properly deasserted. Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> --- v1->v2: Address comments from Vaibhav Hiremath and change the patch order as pointed out by Santosh Shilimkar arch/arm/mach-omap2/omap_hwmod.c | 5 +---- arch/arm/mach-omap2/prm33xx.c | 11 +++++++---- arch/arm/mach-omap2/prm33xx.h | 2 +- 3 files changed, 9 insertions(+), 9 deletions(-)