@@ -22,49 +22,49 @@
#include <mach/hardware.h>
-#define IRQ_VIC_START 1 /* first VIC interrupt is 1 */
+#define IRQ_VIC_START 32 /* first VIC interrupt is 1 */
/*
* Interrupt numbers generic for all Nomadik Chip cuts
*/
-#define IRQ_WATCHDOG 1
-#define IRQ_SOFTINT 2
-#define IRQ_CRYPTO 3
-#define IRQ_OWM 4
-#define IRQ_MTU0 5
-#define IRQ_MTU1 6
-#define IRQ_GPIO0 7
-#define IRQ_GPIO1 8
-#define IRQ_GPIO2 9
-#define IRQ_GPIO3 10
-#define IRQ_RTC_RTT 11
-#define IRQ_SSP 12
-#define IRQ_UART0 13
-#define IRQ_DMA1 14
-#define IRQ_CLCD_MDIF 15
-#define IRQ_DMA0 16
-#define IRQ_PWRFAIL 17
-#define IRQ_UART1 18
-#define IRQ_FIRDA 19
-#define IRQ_MSP0 20
-#define IRQ_I2C0 21
-#define IRQ_I2C1 22
-#define IRQ_SDMMC 23
-#define IRQ_USBOTG 24
-#define IRQ_SVA_IT0 25
-#define IRQ_SVA_IT1 26
-#define IRQ_SAA_IT0 27
-#define IRQ_SAA_IT1 28
-#define IRQ_UART2 29
-#define IRQ_MSP2 30
-#define IRQ_L2CC 49
-#define IRQ_HPI 50
-#define IRQ_SKE 51
-#define IRQ_KP 52
-#define IRQ_MEMST 55
-#define IRQ_SGA_IT 59
-#define IRQ_USBM 61
-#define IRQ_MSP1 63
+#define IRQ_WATCHDOG (IRQ_VIC_START+0)
+#define IRQ_SOFTINT (IRQ_VIC_START+1)
+#define IRQ_CRYPTO (IRQ_VIC_START+2)
+#define IRQ_OWM (IRQ_VIC_START+3)
+#define IRQ_MTU0 (IRQ_VIC_START+4)
+#define IRQ_MTU1 (IRQ_VIC_START+5)
+#define IRQ_GPIO0 (IRQ_VIC_START+6)
+#define IRQ_GPIO1 (IRQ_VIC_START+7)
+#define IRQ_GPIO2 (IRQ_VIC_START+8)
+#define IRQ_GPIO3 (IRQ_VIC_START+9)
+#define IRQ_RTC_RTT (IRQ_VIC_START+10)
+#define IRQ_SSP (IRQ_VIC_START+11)
+#define IRQ_UART0 (IRQ_VIC_START+12)
+#define IRQ_DMA1 (IRQ_VIC_START+13)
+#define IRQ_CLCD_MDIF (IRQ_VIC_START+14)
+#define IRQ_DMA0 (IRQ_VIC_START+15)
+#define IRQ_PWRFAIL (IRQ_VIC_START+16)
+#define IRQ_UART1 (IRQ_VIC_START+17)
+#define IRQ_FIRDA (IRQ_VIC_START+18)
+#define IRQ_MSP0 (IRQ_VIC_START+19)
+#define IRQ_I2C0 (IRQ_VIC_START+20)
+#define IRQ_I2C1 (IRQ_VIC_START+21)
+#define IRQ_SDMMC (IRQ_VIC_START+22)
+#define IRQ_USBOTG (IRQ_VIC_START+23)
+#define IRQ_SVA_IT0 (IRQ_VIC_START+24)
+#define IRQ_SVA_IT1 (IRQ_VIC_START+25)
+#define IRQ_SAA_IT0 (IRQ_VIC_START+26)
+#define IRQ_SAA_IT1 (IRQ_VIC_START+27)
+#define IRQ_UART2 (IRQ_VIC_START+28)
+#define IRQ_MSP2 (IRQ_VIC_START+29)
+#define IRQ_L2CC (IRQ_VIC_START+30)
+#define IRQ_HPI (IRQ_VIC_START+31)
+#define IRQ_SKE (IRQ_VIC_START+32)
+#define IRQ_KP (IRQ_VIC_START+33)
+#define IRQ_MEMST (IRQ_VIC_START+34)
+#define IRQ_SGA_IT (IRQ_VIC_START+35)
+#define IRQ_USBM (IRQ_VIC_START+36)
+#define IRQ_MSP1 (IRQ_VIC_START+37)
#define NOMADIK_GPIO_OFFSET (IRQ_VIC_START+64)
Bump the IRQ numbers from offset at 1 (right above NO_IRQ) to 32. This is the painful way to learn that if you're using SPARSE_IRQ and avoid to define .nr_irqs in your machine, the first 16 IRQs will be pre-allocated, and the IRQdomain code (as the VIC core code before it) will then assume that all IRQ descriptors are pre-allocated, and 16 of them are - by somebody else. So mapping the IRQs will fail in irq_create_mapping(). Moving the offset upward rids us of this problem. Cc: Rob Herring <rob.herring@calxeda.com> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- arch/arm/mach-nomadik/include/mach/irqs.h | 78 +++++++++++++++---------------- 1 file changed, 39 insertions(+), 39 deletions(-)