| Message ID | 1357223976-9097-1-git-send-email-mikedunn@newsguy.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 01/03/13 16:39, Mike Dunn wrote: > Change log: > v2: Heed Igor's admonishment to define a macro instead of using MFP_CFG_OUT > directly. Thanks. Usually, the change log is not useful after applying the patch, so it should go below the scissors line ("---"). > > This patch fixes some code that implements a work-around to a hardware bug in > the ac97 controller on the pxa27x. A bug in the controller's warm reset > functionality requires that the mfp used by the controller as the AC97_RESET_n > line be temporarily reconfigured as a generic output gpio (AF0) and manually > held high for the duration of the warm reset cycle. This is what was done in > the original code, but it was broken long ago by commit > fb1bf8cd13bfa7ed0364ab0d82f717fc020d35f6 > ([ARM] pxa: introduce processor specific pxa27x_assert_ac97reset()) > which changed the mfp to a GPIO input instead of a high output. > > Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Thanks! Acked-by: Igor Grinberg <grinberg@compulab.co.il> > --- > arch/arm/mach-pxa/include/mach/mfp-pxa27x.h | 3 +++ > arch/arm/mach-pxa/pxa27x.c | 4 ++-- > 2 files changed, 5 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h > index a611ad3..8281e17 100644 > --- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h > +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h > @@ -463,6 +463,9 @@ > GPIO76_LCD_PCLK, \ > GPIO77_LCD_BIAS > > +/* these enable a work-around for a hw bug in pxa27x during ac97 warm reset */ > +#define GPIO113_AC97_nRESET_GPIO_HIGH MFP_CFG_OUT(GPIO113, AF0, DRIVE_HIGH) > +#define GPIO95_AC97_nRESET_GPIO_HIGH MFP_CFG_OUT(GPIO95, AF0, DRIVE_HIGH) > > extern int keypad_set_wake(unsigned int on); > #endif /* __ASM_ARCH_MFP_PXA27X_H */ > diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c > index 8047ee0..616cb87 100644 > --- a/arch/arm/mach-pxa/pxa27x.c > +++ b/arch/arm/mach-pxa/pxa27x.c > @@ -47,9 +47,9 @@ void pxa27x_clear_otgph(void) > EXPORT_SYMBOL(pxa27x_clear_otgph); > > static unsigned long ac97_reset_config[] = { > - GPIO113_GPIO, > + GPIO113_AC97_nRESET_GPIO_HIGH, > GPIO113_AC97_nRESET, > - GPIO95_GPIO, > + GPIO95_AC97_nRESET_GPIO_HIGH, > GPIO95_AC97_nRESET, > }; >
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h index a611ad3..8281e17 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h @@ -463,6 +463,9 @@ GPIO76_LCD_PCLK, \ GPIO77_LCD_BIAS +/* these enable a work-around for a hw bug in pxa27x during ac97 warm reset */ +#define GPIO113_AC97_nRESET_GPIO_HIGH MFP_CFG_OUT(GPIO113, AF0, DRIVE_HIGH) +#define GPIO95_AC97_nRESET_GPIO_HIGH MFP_CFG_OUT(GPIO95, AF0, DRIVE_HIGH) extern int keypad_set_wake(unsigned int on); #endif /* __ASM_ARCH_MFP_PXA27X_H */ diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 8047ee0..616cb87 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -47,9 +47,9 @@ void pxa27x_clear_otgph(void) EXPORT_SYMBOL(pxa27x_clear_otgph); static unsigned long ac97_reset_config[] = { - GPIO113_GPIO, + GPIO113_AC97_nRESET_GPIO_HIGH, GPIO113_AC97_nRESET, - GPIO95_GPIO, + GPIO95_AC97_nRESET_GPIO_HIGH, GPIO95_AC97_nRESET, };
Change log: v2: Heed Igor's admonishment to define a macro instead of using MFP_CFG_OUT directly. Thanks. This patch fixes some code that implements a work-around to a hardware bug in the ac97 controller on the pxa27x. A bug in the controller's warm reset functionality requires that the mfp used by the controller as the AC97_RESET_n line be temporarily reconfigured as a generic output gpio (AF0) and manually held high for the duration of the warm reset cycle. This is what was done in the original code, but it was broken long ago by commit fb1bf8cd13bfa7ed0364ab0d82f717fc020d35f6 ([ARM] pxa: introduce processor specific pxa27x_assert_ac97reset()) which changed the mfp to a GPIO input instead of a high output. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> --- arch/arm/mach-pxa/include/mach/mfp-pxa27x.h | 3 +++ arch/arm/mach-pxa/pxa27x.c | 4 ++-- 2 files changed, 5 insertions(+), 2 deletions(-)