@@ -32,6 +32,58 @@
interrupts = <5>;
};
+ gpio0: gpio@101e4000 {
+ compatible = "st,nomadik-gpio";
+ reg = <0x101e4000 0x80>;
+ interrupt-parent = <&vica>;
+ interrupts = <6>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <0>;
+ };
+
+ gpio1: gpio@101e5000 {
+ compatible = "st,nomadik-gpio";
+ reg = <0x101e5000 0x80>;
+ interrupt-parent = <&vica>;
+ interrupts = <7>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <1>;
+ };
+
+ gpio2: gpio@101e6000 {
+ compatible = "st,nomadik-gpio";
+ reg = <0x101e6000 0x80>;
+ interrupt-parent = <&vica>;
+ interrupts = <8>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <2>;
+ };
+
+ gpio3: gpio@101e7000 {
+ compatible = "st,nomadik-gpio";
+ reg = <0x101e7000 0x80>;
+ interrupt-parent = <&vica>;
+ interrupts = <9>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <3>;
+ };
+
+ pinctrl {
+ compatible = "stericsson,nmk-pinctrl-stn8815";
+ };
+
/* A NAND flash of 128 MiB */
fsmc: flash@40000000 {
compatible = "stericsson,fsmc-nand";
@@ -153,13 +153,15 @@ static int __init cpu8815_init(void)
/* No custom data yet */
};
+ /* For e.g. device tree boots */
+ if (!machine_is_nomadik())
+ return 0;
+
cpu8815_add_gpios(cpu8815_gpio_base, ARRAY_SIZE(cpu8815_gpio_base),
IRQ_GPIO0, &pdata);
cpu8815_add_pinctrl(NULL, "pinctrl-stn8815");
- if (machine_is_nomadik()) {
- amba_apb_device_add(NULL, "rng", NOMADIK_RNG_BASE, SZ_4K, 0, 0, NULL, 0);
- amba_apb_device_add(NULL, "rtc-pl031", NOMADIK_RTC_BASE, SZ_4K, IRQ_RTC_RTT, 0, NULL, 0);
- }
+ amba_apb_device_add(NULL, "rng", NOMADIK_RNG_BASE, SZ_4K, 0, 0, NULL, 0);
+ amba_apb_device_add(NULL, "rtc-pl031", NOMADIK_RTC_BASE, SZ_4K, IRQ_RTC_RTT, 0, NULL, 0);
return 0;
}
arch_initcall(cpu8815_init);
@@ -276,6 +278,16 @@ static struct fsmc_nand_platform_data cpu8815_nand_data = {
/* These are mostly to get the right device names for the clock lookups */
static struct of_dev_auxdata cpu8815_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO0_BASE,
+ "gpio.0", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO1_BASE,
+ "gpio.1", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO2_BASE,
+ "gpio.2", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO3_BASE,
+ "gpio.3", NULL),
+ OF_DEV_AUXDATA("stericsson,nmk-pinctrl-stn8815", 0,
+ "pinctrl-stn8815", NULL),
OF_DEV_AUXDATA("arm,primecell", NOMADIK_UART0_BASE,
"uart0", NULL),
OF_DEV_AUXDATA("arm,primecell", NOMADIK_UART1_BASE,
@@ -296,6 +308,7 @@ static void __init cpu8815_init_of(void)
/* At full speed latency must be >=2, so 0x249 in low bits */
l2x0_of_init(0x00730249, 0xfe000fff);
#endif
+ pinctrl_register_mappings(nhk8815_pinmap, ARRAY_SIZE(nhk8815_pinmap));
of_platform_populate(NULL, of_default_bus_match_table,
cpu8815_auxdata_lookup, NULL);
}
@@ -1840,6 +1840,10 @@ static struct pinctrl_desc nmk_pinctrl_desc = {
static const struct of_device_id nmk_pinctrl_match[] = {
{
+ .compatible = "stericsson,nmk-pinctrl-stn8815",
+ .data = (void *)PINCTRL_NMK_STN8815,
+ },
+ {
.compatible = "stericsson,nmk_pinctrl",
.data = (void *)PINCTRL_NMK_DB8500,
},
This moves the instances of the Nomadik pin controller and the Nomadik GPIO blocks (also handled by the GPIO driver) over to the device tree. A new compatible string is added to the pin control driver in the process. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- arch/arm/boot/dts/ste-nomadik-stn8815.dtsi | 52 ++++++++++++++++++++++++++++++ arch/arm/mach-nomadik/cpu-8815.c | 21 +++++++++--- drivers/pinctrl/pinctrl-nomadik.c | 4 +++ 3 files changed, 73 insertions(+), 4 deletions(-)