@@ -15,4 +15,13 @@
chosen {
bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk";
};
+
+ /* The S8815 is using this very GPIO pin for the SMSC91x IRQs */
+ external-bus@34000000 {
+ ethernet@300 {
+ gpios = <&gpio3 19 0x1>;
+ interrupts = <19 0x1>;
+ interrupt-parent = <&gpio3>;
+ };
+ };
};
@@ -122,6 +122,18 @@
};
};
+ external-bus@34000000 {
+ compatible = "simple-bus";
+ reg = <0x34000000 0x1000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x34000000 0x1000000>;
+ ethernet@300 {
+ compatible = "smsc,lan91c111";
+ reg = <0x300 0x0fd00>;
+ };
+ };
+
amba {
compatible = "arm,amba-bus";
#address-cells = <1>;
@@ -240,6 +240,8 @@ static int __init nhk8815_eth_init(void)
int gpio_nr = 115; /* hardwired in the board */
int err;
+ if (!machine_is_nomadik())
+ return 0;
err = gpio_request(gpio_nr, "eth_irq");
if (!err) err = gpio_direction_input(gpio_nr);
if (err)
@@ -30,9 +30,11 @@
#include <linux/pinctrl/machine.h>
#include <linux/platform_data/clocksource-nomadik-mtu.h>
#include <linux/of_irq.h>
+#include <linux/of_gpio.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/mtd/fsmc.h>
+#include <linux/gpio.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
@@ -276,6 +278,38 @@ static struct fsmc_nand_platform_data cpu8815_nand_data = {
.nand_timings = &cpu8815_nand_timings,
};
+/*
+ * The SMSC911x IRQ is connected to a GPIO pin, but the driver expects
+ * to simply request an IRQ passed as a resource. So the GPIO pin needs
+ * to be requested by this hog and set as input.
+ */
+static int __init cpu8815_eth_init(void)
+{
+ struct device_node *eth;
+ int gpio, irq, err;
+
+ eth = of_find_node_by_path("/external-bus@34000000/ethernet@300");
+ if (!eth) {
+ pr_info("could not find any ethernet controller\n");
+ return 0;
+ }
+ gpio = of_get_gpio(eth, 0);
+ err = gpio_request(gpio, "eth_irq");
+ if (err) {
+ pr_info("failed to request ethernet GPIO\n");
+ return -ENODEV;
+ }
+ err = gpio_direction_input(gpio);
+ if (err) {
+ pr_info("failed to set ehernet GPIO as input\n");
+ return -ENODEV;
+ }
+ irq = gpio_to_irq(gpio);
+ pr_info("enabled ethernet GPIO %d, IRQ %d\n", gpio, irq);
+ return 0;
+}
+device_initcall(cpu8815_eth_init);
+
/* These are mostly to get the right device names for the clock lookups */
static struct of_dev_auxdata cpu8815_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO0_BASE,
This converts the SMSC91x ethernet controller to use device tree. The existing solution from the board file, to request the GPIO triggering the ethernet IRQ from the board file is kept for the time being, but the GPIO number assignment is moved over to the device tree. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- arch/arm/boot/dts/ste-nomadik-s8815.dts | 9 ++++++++ arch/arm/boot/dts/ste-nomadik-stn8815.dtsi | 12 +++++++++++ arch/arm/mach-nomadik/board-nhk8815.c | 2 ++ arch/arm/mach-nomadik/cpu-8815.c | 34 ++++++++++++++++++++++++++++++ 4 files changed, 57 insertions(+)