@@ -31,6 +31,7 @@
#include <linux/mfd/abx500/ab8500-gpadc.h>
#include <linux/mfd/abx500/ux500_chargalg.h>
#include <linux/usb/otg.h>
+#include <linux/mutex.h>
/* Charger constants */
#define NO_PW_CONN 0
@@ -68,6 +69,11 @@
#define MAIN_CH_NOK 0x01
#define VBUS_DET 0x80
+#define MAIN_CH_STATUS2_MAINCHGDROP 0x80
+#define MAIN_CH_STATUS2_MAINCHARGERDETDBNC 0x40
+#define USB_CH_VBUSDROP 0x40
+#define USB_CH_VBUSDETDBNC 0x01
+
/* UsbLineStatus register bit masks */
#define AB8500_USB_LINK_STATUS 0x78
#define AB8500_STD_HOST_SUSP 0x18
@@ -82,6 +88,8 @@
/* Step up/down delay in us */
#define STEP_UDELAY 1000
+#define CHARGER_STATUS_POLL 10 /* in ms */
+
/* UsbLineStatus register - usb types */
enum ab8500_charger_link_status {
USB_STAT_NOT_CONFIGURED,
@@ -203,6 +211,10 @@ struct ab8500_charger_usb_state {
* @check_usbchgnotok_work: Work for checking USB charger not ok status
* @kick_wd_work: Work for kicking the charger watchdog in case
* of ABB rev 1.* due to the watchog logic bug
+ * @ac_charger_attached_work: Work for checking if AC charger is still
+ * connected
+ * @usb_charger_attached_work: Work for checking if USB charger is still
+ * connected
* @ac_work: Work for checking AC charger connection
* @detect_usb_type_work: Work for detecting the USB type connected
* @usb_link_status_work: Work for checking the new USB link status
@@ -211,6 +223,7 @@ struct ab8500_charger_usb_state {
* Work for checking Main thermal status
* @check_usb_thermal_prot_work:
* Work for checking USB thermal status
+ * @charger_attached_mutex: For controlling the wakelock
*/
struct ab8500_charger {
struct device *dev;
@@ -239,6 +252,8 @@ struct ab8500_charger {
struct delayed_work check_hw_failure_work;
struct delayed_work check_usbchgnotok_work;
struct delayed_work kick_wd_work;
+ struct delayed_work ac_charger_attached_work;
+ struct delayed_work usb_charger_attached_work;
struct work_struct ac_work;
struct work_struct detect_usb_type_work;
struct work_struct usb_link_status_work;
@@ -247,6 +262,7 @@ struct ab8500_charger {
struct work_struct check_usb_thermal_prot_work;
struct usb_phy *usb_phy;
struct notifier_block nb;
+ struct mutex charger_attached_mutex;
};
/* AC properties */
@@ -349,6 +365,19 @@ static void ab8500_charger_set_usb_connected(struct ab8500_charger *di,
dev_dbg(di->dev, "USB connected:%i\n", connected);
di->usb.charger_connected = connected;
sysfs_notify(&di->usb_chg.psy.dev->kobj, NULL, "present");
+
+ if (connected) {
+ mutex_lock(&di->charger_attached_mutex);
+ mutex_unlock(&di->charger_attached_mutex);
+
+ queue_delayed_work(di->charger_wq,
+ &di->usb_charger_attached_work,
+ HZ);
+ } else {
+ cancel_delayed_work_sync(&di->usb_charger_attached_work);
+ mutex_lock(&di->charger_attached_mutex);
+ mutex_unlock(&di->charger_attached_mutex);
+ }
}
}
@@ -1706,6 +1735,84 @@ static void ab8500_charger_ac_work(struct work_struct *work)
sysfs_notify(&di->ac_chg.psy.dev->kobj, NULL, "present");
}
+static void ab8500_charger_usb_attached_work(struct work_struct *work)
+{
+ struct ab8500_charger *di = container_of(work,
+ struct ab8500_charger,
+ usb_charger_attached_work.work);
+ int usbch = (USB_CH_VBUSDROP | USB_CH_VBUSDETDBNC);
+ int ret, i;
+ u8 statval;
+
+ for (i = 0; i < 10; i++) {
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_CHARGER,
+ AB8500_CH_USBCH_STAT1_REG,
+ &statval);
+ if (ret < 0) {
+ dev_err(di->dev, "ab8500 read failed %d\n", __LINE__);
+ goto reschedule;
+ }
+ if ((statval & usbch)) != usbch)
+ goto reschedule;
+
+ msleep(CHARGER_STATUS_POLL);
+ }
+
+ ab8500_charger_usb_en(&di->usb_chg, 0, 0, 0);
+
+ mutex_lock(&di->charger_attached_mutex);
+ mutex_unlock(&di->charger_attached_mutex);
+
+ return;
+
+reschedule:
+ queue_delayed_work(di->charger_wq,
+ &di->usb_charger_attached_work,
+ HZ);
+}
+
+static void ab8500_charger_ac_attached_work(struct work_struct *work)
+{
+
+ struct ab8500_charger *di = container_of(work,
+ struct ab8500_charger,
+ ac_charger_attached_work.work);
+ int mainch = (MAIN_CH_STATUS2_MAINCHGDROP |
+ MAIN_CH_STATUS2_MAINCHARGERDETDBNC);
+ int ret, i;
+ u8 statval;
+
+ for (i = 0; i < 10; i++) {
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_CHARGER,
+ AB8500_CH_STATUS2_REG,
+ &statval);
+ if (ret < 0) {
+ dev_err(di->dev, "ab8500 read failed %d\n", __LINE__);
+ goto reschedule;
+ }
+
+ if ((statval & mainch)) != mainch)
+ goto reschedule;
+
+ msleep(CHARGER_STATUS_POLL);
+ }
+
+ ab8500_charger_ac_en(&di->ac_chg, 0, 0, 0);
+ queue_work(di->charger_wq, &di->ac_work);
+
+ mutex_lock(&di->charger_attached_mutex);
+ mutex_unlock(&di->charger_attached_mutex);
+
+ return;
+
+reschedule:
+ queue_delayed_work(di->charger_wq,
+ &di->ac_charger_attached_work,
+ HZ);
+}
+
/**
* ab8500_charger_detect_usb_type_work() - work to detect USB type
* @work: Pointer to the work_struct structure
@@ -1986,6 +2093,10 @@ static irqreturn_t ab8500_charger_mainchunplugdet_handler(int irq, void *_di)
dev_dbg(di->dev, "Main charger unplugged\n");
queue_work(di->charger_wq, &di->ac_work);
+ cancel_delayed_work_sync(&di->ac_charger_attached_work);
+ mutex_lock(&di->charger_attached_mutex);
+ mutex_unlock(&di->charger_attached_mutex);
+
return IRQ_HANDLED;
}
@@ -2003,6 +2114,11 @@ static irqreturn_t ab8500_charger_mainchplugdet_handler(int irq, void *_di)
dev_dbg(di->dev, "Main charger plugged\n");
queue_work(di->charger_wq, &di->ac_work);
+ mutex_lock(&di->charger_attached_mutex);
+ mutex_unlock(&di->charger_attached_mutex);
+ queue_delayed_work(di->charger_wq,
+ &di->ac_charger_attached_work,
+ HZ);
return IRQ_HANDLED;
}
@@ -2637,7 +2753,7 @@ static int __devinit ab8500_charger_probe(struct platform_device *pdev)
struct device_node *np = pdev->dev.of_node;
struct abx500_bm_data *plat = pdev->dev.platform_data;
struct ab8500_charger *di;
- int irq, i, charger_status, ret = 0;
+ int irq, i, charger_status, ret = 0, ch_stat;
di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL);
if (!di) {
@@ -2716,12 +2832,19 @@ static int __devinit ab8500_charger_probe(struct platform_device *pdev)
return -ENOMEM;
}
+ mutex_init(&di->charger_attached_mutex);
+
/* Init work for HW failure check */
INIT_DEFERRABLE_WORK(&di->check_hw_failure_work,
ab8500_charger_check_hw_failure_work);
INIT_DEFERRABLE_WORK(&di->check_usbchgnotok_work,
ab8500_charger_check_usbchargernotok_work);
+ INIT_DELAYED_WORK(&di->ac_charger_attached_work,
+ ab8500_charger_ac_attached_work);
+ INIT_DELAYED_WORK(&di->usb_charger_attached_work,
+ ab8500_charger_usb_attached_work);
+
/*
* For ABB revision 1.0 and 1.1 there is a bug in the watchdog
* logic. That means we have to continously kick the charger
@@ -2835,6 +2958,23 @@ static int __devinit ab8500_charger_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, di);
+ mutex_lock(&di->charger_attached_mutex);
+
+ ch_stat = ab8500_charger_detect_chargers(di);
+
+ if ((ch_stat & AC_PW_CONN) == AC_PW_CONN) {
+ queue_delayed_work(di->charger_wq,
+ &di->ac_charger_attached_work,
+ HZ);
+ }
+ if ((ch_stat & USB_PW_CONN) == USB_PW_CONN) {
+ queue_delayed_work(di->charger_wq,
+ &di->usb_charger_attached_work,
+ HZ);
+ }
+
+ mutex_unlock(&di->charger_attached_mutex);
+
return ret;
free_irq:
Add two new work queues to provide USB and AC charger disconnect detection. Signed-off-by: Lee Jones <lee.jones@linaro.org> --- drivers/power/ab8500_charger.c | 142 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 141 insertions(+), 1 deletion(-)