@@ -311,3 +311,16 @@ config MACH_WLF_CRAGG_6410
select SAMSUNG_GPIO_EXTRA128
help
Machine support for the Wolfson Cragganmore S3C6410 variant.
+
+config MACH_S3C64XX_DT
+ bool "Samsung S3C6400/S3C6410 machine using Device Tree"
+ select CPU_S3C6400
+ select CPU_S3C6410
+ select USE_OF
+ help
+ Machine support for Samsung S3C6400/S3C6410 machines with Device Tree
+ enabled.
+ Select this if a fdt blob is available for your S3C64XX SoC based
+ board.
+ Note: This is under development and not all peripherals can be
+ supported with this machine file.
@@ -58,3 +58,4 @@ obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o
obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o
obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o
+obj-$(CONFIG_MACH_S3C64XX_DT) += mach-s3c64xx-dt.o
new file mode 100644
@@ -0,0 +1,84 @@
+/*
+ * Samsung's S3C64XX flattened device tree enabled machine
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/of_platform.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+
+#include <plat/cpu.h>
+#include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
+
+#include "common.h"
+
+/*
+ * The following lookup table is used to override device names when devices
+ * are registered from device tree. This is temporarily added to enable
+ * device tree support addition for the S3C64xx architecture.
+ *
+ * For drivers that require platform data to be provided from the machine
+ * file, a platform data pointer can also be supplied along with the
+ * devices names. Usually, the platform data elements that cannot be parsed
+ * from the device tree by the drivers (example: function pointers) are
+ * supplied. But it should be noted that this is a temporary mechanism and
+ * at some point, the drivers should be capable of parsing all the platform
+ * data from the device tree.
+ */
+static const struct of_dev_auxdata s3c64xx_auxdata_lookup[] __initconst = {
+ OF_DEV_AUXDATA("samsung,s3c6400-uart", 0x7f005000,
+ "s3c6400-uart.0", NULL),
+ OF_DEV_AUXDATA("samsung,s3c6400-uart", 0x7f005400,
+ "s3c6400-uart.1", NULL),
+ OF_DEV_AUXDATA("samsung,s3c6400-uart", 0x7f005800,
+ "s3c6400-uart.2", NULL),
+ OF_DEV_AUXDATA("samsung,s3c6400-uart", 0x7f005c00,
+ "s3c6400-uart.3", NULL),
+ OF_DEV_AUXDATA("samsung,s3c6410-sdhci", 0x7c200000,
+ "s3c-sdhci.0", NULL),
+ OF_DEV_AUXDATA("samsung,s3c6410-sdhci", 0x7c300000,
+ "s3c-sdhci.1", NULL),
+ OF_DEV_AUXDATA("samsung,s3c6410-sdhci", 0x7c400000,
+ "s3c-sdhci.2", NULL),
+ {},
+};
+
+static void __init s3c64xx_dt_map_io(void)
+{
+ s3c64xx_init_io(NULL, 0);
+ s3c24xx_init_clocks(12000000);
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
+}
+
+static void __init s3c64xx_dt_machine_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table,
+ s3c64xx_auxdata_lookup, NULL);
+}
+
+static char const *s3c64xx_dt_compat[] __initdata = {
+ "samsung,s3c6400",
+ "samsung,s3c6410",
+ NULL
+};
+
+DT_MACHINE_START(S3C6400_DT, "Samsung S3C64xx (Flattened Device Tree)")
+ /* Maintainer: Tomasz Figa <tomasz.figa@gmail.com> */
+ .init_irq = s3c64xx_of_init_irq,
+ .map_io = s3c64xx_dt_map_io,
+ .handle_irq = vic_handle_irq,
+ .init_machine = s3c64xx_dt_machine_init,
+ .init_late = s3c64xx_init_late,
+ .timer = &samsung_timer,
+ .dt_compat = s3c64xx_dt_compat,
+ .restart = s3c64xx_restart,
+MACHINE_END
This patch adds board file that will be used to boot S3C64xx-based boards using Device Tree. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> --- arch/arm/mach-s3c64xx/Kconfig | 13 +++++ arch/arm/mach-s3c64xx/Makefile | 1 + arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c | 84 +++++++++++++++++++++++++++++++++ 3 files changed, 98 insertions(+) create mode 100644 arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c