@@ -45,6 +45,38 @@
compatible = "fixed-clock";
clock-frequency = <24000000>;
};
+
+ clkuart0: uart0 {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&ref24>;
+ enable-reg = <0x250>;
+ enable-bit = <1>;
+ };
+
+ clkuart1: uart1 {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&ref24>;
+ enable-reg = <0x250>;
+ enable-bit = <2>;
+ };
+
+ clkuart2: uart2 {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&ref24>;
+ enable-reg = <0x250>;
+ enable-bit = <3>;
+ };
+
+ clkuart3: uart3 {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&ref24>;
+ enable-reg = <0x250>;
+ enable-bit = <4>;
+ };
};
};
@@ -83,28 +115,28 @@
compatible = "via,vt8500-uart";
reg = <0xd8200000 0x1040>;
interrupts = <32>;
- clocks = <&ref24>;
+ clocks = <&clkuart0>;
};
uart@d82b0000 {
compatible = "via,vt8500-uart";
reg = <0xd82b0000 0x1040>;
interrupts = <33>;
- clocks = <&ref24>;
+ clocks = <&clkuart1>;
};
uart@d8210000 {
compatible = "via,vt8500-uart";
reg = <0xd8210000 0x1040>;
interrupts = <47>;
- clocks = <&ref24>;
+ clocks = <&clkuart2>;
};
uart@d82c0000 {
compatible = "via,vt8500-uart";
reg = <0xd82c0000 0x1040>;
interrupts = <50>;
- clocks = <&ref24>;
+ clocks = <&clkuart3>;
};
rtc@d8100000 {
@@ -59,6 +59,54 @@
compatible = "fixed-clock";
clock-frequency = <24000000>;
};
+
+ clkuart0: uart0 {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&ref24>;
+ enable-reg = <0x250>;
+ enable-bit = <1>;
+ };
+
+ clkuart1: uart1 {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&ref24>;
+ enable-reg = <0x250>;
+ enable-bit = <2>;
+ };
+
+ clkuart2: uart2 {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&ref24>;
+ enable-reg = <0x250>;
+ enable-bit = <3>;
+ };
+
+ clkuart3: uart3 {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&ref24>;
+ enable-reg = <0x250>;
+ enable-bit = <4>;
+ };
+
+ clkuart4: uart4 {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&ref24>;
+ enable-reg = <0x250>;
+ enable-bit = <22>;
+ };
+
+ clkuart5: uart5 {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&ref24>;
+ enable-reg = <0x250>;
+ enable-bit = <23>;
+ };
};
};
@@ -96,42 +144,42 @@
compatible = "via,vt8500-uart";
reg = <0xd8200000 0x1040>;
interrupts = <32>;
- clocks = <&ref24>;
+ clocks = <&clkuart0>;
};
uart@d82b0000 {
compatible = "via,vt8500-uart";
reg = <0xd82b0000 0x1040>;
interrupts = <33>;
- clocks = <&ref24>;
+ clocks = <&clkuart1>;
};
uart@d8210000 {
compatible = "via,vt8500-uart";
reg = <0xd8210000 0x1040>;
interrupts = <47>;
- clocks = <&ref24>;
+ clocks = <&clkuart2>;
};
uart@d82c0000 {
compatible = "via,vt8500-uart";
reg = <0xd82c0000 0x1040>;
interrupts = <50>;
- clocks = <&ref24>;
+ clocks = <&clkuart3>;
};
uart@d8370000 {
compatible = "via,vt8500-uart";
reg = <0xd8370000 0x1040>;
interrupts = <31>;
- clocks = <&ref24>;
+ clocks = <&clkuart4>;
};
uart@d8380000 {
compatible = "via,vt8500-uart";
reg = <0xd8380000 0x1040>;
interrupts = <30>;
- clocks = <&ref24>;
+ clocks = <&clkuart5>;
};
rtc@d8100000 {
@@ -75,6 +75,22 @@
reg = <0x204>;
};
+ clkuart0: uart0 {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&ref24>;
+ enable-reg = <0x250>;
+ enable-bit = <1>;
+ };
+
+ clkuart1: uart1 {
+ #clock-cells = <0>;
+ compatible = "via,vt8500-device-clock";
+ clocks = <&ref24>;
+ enable-reg = <0x250>;
+ enable-bit = <2>;
+ };
+
arm: arm {
#clock-cells = <0>;
compatible = "via,vt8500-device-clock";
@@ -128,14 +144,14 @@
compatible = "via,vt8500-uart";
reg = <0xd8200000 0x1040>;
interrupts = <32>;
- clocks = <&ref24>;
+ clocks = <&clkuart0>;
};
uart@d82b0000 {
compatible = "via,vt8500-uart";
reg = <0xd82b0000 0x1040>;
interrupts = <33>;
- clocks = <&ref24>;
+ clocks = <&clkuart1>;
};
rtc@d8100000 {
@@ -604,12 +604,16 @@ static int vt8500_serial_probe(struct platform_device *pdev)
vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
vt8500_port->clk = of_clk_get(pdev->dev.of_node, 0);
- if (vt8500_port->clk) {
- vt8500_port->uart.uartclk = clk_get_rate(vt8500_port->clk);
- } else {
- /* use the default of 24Mhz if not specified and warn */
- pr_warn("%s: serial clock source not specified\n", __func__);
- vt8500_port->uart.uartclk = 24000000;
+ if (IS_ERR(vt8500_port->clk)) {
+ dev_err(&pdev->dev, "failed to get clock\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ ret = clk_prepare_enable(vt8500_port->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable clock\n");
+ goto err;
}
snprintf(vt8500_port->name, sizeof(vt8500_port->name),
@@ -639,6 +643,7 @@ static int vt8500_serial_remove(struct platform_device *pdev)
struct vt8500_port *vt8500_port = platform_get_drvdata(pdev);
platform_set_drvdata(pdev, NULL);
+ clk_disable_unprepare(vt8500_port->clk);
uart_remove_one_port(&vt8500_uart_driver, &vt8500_port->uart);
kfree(vt8500_port);
UART modules on Wondermedia SoCs are connected via a gated clock source, rather than directly to the 24Mhz reference clock. While uboot enables UART0 for debugging, other UART ports are unavailable until the clock is enabled. This patch checks that a valid clock is actually passed from devicetree, enables the clock in probe. This change removes the fallback when a clock was not specified as it doesn't apply any longer (and would only work if the UART clock was already enabled). DTSI files are updated for VT8500, WM8505 and WM8650. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> --- arch/arm/boot/dts/vt8500.dtsi | 40 +++++++++++++++++++++--- arch/arm/boot/dts/wm8505.dtsi | 60 ++++++++++++++++++++++++++++++++---- arch/arm/boot/dts/wm8650.dtsi | 20 ++++++++++-- drivers/tty/serial/vt8500_serial.c | 17 ++++++---- 4 files changed, 119 insertions(+), 18 deletions(-)