From patchwork Fri Jan 25 08:54:05 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Maxime Ripard X-Patchwork-Id: 2041791 Return-Path: X-Original-To: patchwork-linux-arm@patchwork.kernel.org Delivered-To: patchwork-process-083081@patchwork1.kernel.org Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) by patchwork1.kernel.org (Postfix) with ESMTP id AB3AA3FDBC for ; Fri, 25 Jan 2013 08:57:06 +0000 (UTC) Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.76 #1 (Red Hat Linux)) id 1Tyf3c-0002T0-CS; Fri, 25 Jan 2013 08:54:44 +0000 Received: from mail.free-electrons.com ([94.23.35.102]) by merlin.infradead.org with esmtp (Exim 4.76 #1 (Red Hat Linux)) id 1Tyf3C-0002M6-NB for linux-arm-kernel@lists.infradead.org; Fri, 25 Jan 2013 08:54:22 +0000 Received: by mail.free-electrons.com (Postfix, from userid 106) id 4E0B75ED6; Fri, 25 Jan 2013 09:54:19 +0100 (CET) X-Spam-Checker-Version: SpamAssassin 3.3.2 (2011-06-06) on mail.free-electrons.com X-Spam-Level: X-Spam-Status: No, score=-1.0 required=5.0 tests=ALL_TRUSTED,SHORTCIRCUIT shortcircuit=ham autolearn=disabled version=3.3.2 Received: from localhost (gar31-2-82-226-185-134.fbx.proxad.net [82.226.185.134]) by mail.free-electrons.com (Postfix) with ESMTPSA id 869E85ED4; Fri, 25 Jan 2013 09:54:17 +0100 (CET) From: Maxime Ripard To: Shawn Guo Subject: [PATCH 1/3] fb: backlight: Add the Himax HX-8357B LCD controller Date: Fri, 25 Jan 2013 09:54:05 +0100 Message-Id: <1359104048-26823-2-git-send-email-maxime.ripard@free-electrons.com> X-Mailer: git-send-email 1.7.10.4 In-Reply-To: <1359104048-26823-1-git-send-email-maxime.ripard@free-electrons.com> References: <1359104048-26823-1-git-send-email-maxime.ripard@free-electrons.com> X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20130125_035419_089654_58322484 X-CRM114-Status: GOOD ( 18.81 ) X-Spam-Score: 0.4 (/) X-Spam-Report: SpamAssassin version 3.3.2 on merlin.infradead.org summary: Content analysis details: (0.4 points) pts rule name description ---- ---------------------- -------------------------------------------------- 3.0 KHOP_BIG_TO_CC Sent to 10+ recipients instaed of Bcc or a list -0.0 SPF_PASS SPF: sender matches SPF record -0.7 RP_MATCHES_RCVD Envelope sender domain matches handover relay domain -1.9 BAYES_00 BODY: Bayes spam probability is 0 to 1% [score: 0.0000] Cc: linux-fbdev@vger.kernel.org, Brian Lilly , Florian Tobias Schandinat , devicetree-discuss@lists.ozlabs.org, linux-kernel@vger.kernel.org, Rob Herring , Grant Likely , Richard Purdie , Andrew Morton , linux-arm-kernel@lists.infradead.org X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Sender: linux-arm-kernel-bounces@lists.infradead.org Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org Signed-off-by: Maxime Ripard Cc: Andrew Morton --- drivers/video/backlight/Kconfig | 7 + drivers/video/backlight/Makefile | 1 + drivers/video/backlight/hx8357.c | 482 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 490 insertions(+) create mode 100644 drivers/video/backlight/hx8357.c diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index 765a945..c39bed0 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -126,6 +126,13 @@ config LCD_AMS369FG06 If you have an AMS369FG06 AMOLED Panel, say Y to enable its LCD control driver. +config LCD_HX8357 + tristate "Himax HX-8357 LCD Driver" + depends on SPI + help + If you have a HX-8357 LCD panel, say Y to enable its LCD control + driver. + endif # LCD_CLASS_DEVICE # diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile index e7ce729..b69d391 100644 --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_LCD_TOSA) += tosa_lcd.o obj-$(CONFIG_LCD_S6E63M0) += s6e63m0.o obj-$(CONFIG_LCD_LD9040) += ld9040.o obj-$(CONFIG_LCD_AMS369FG06) += ams369fg06.o +obj-$(CONFIG_LCD_HX8357) += hx8357.o obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o obj-$(CONFIG_BACKLIGHT_ATMEL_PWM) += atmel-pwm-bl.o diff --git a/drivers/video/backlight/hx8357.c b/drivers/video/backlight/hx8357.c new file mode 100644 index 0000000..00925c0 --- /dev/null +++ b/drivers/video/backlight/hx8357.c @@ -0,0 +1,482 @@ +/* + * Driver for the Himax HX-8357 LCD Controller + * + * Copyright 2012 Free Electrons + * + * Licensed under the GPLv2 or later. + */ + +#include +#include +#include +#include +#include +#include +#include + +#define HX8357_NUM_IM_PINS 3 + +#define HX8357_SWRESET 0x01 +#define HX8357_GET_RED_CHANNEL 0x06 +#define HX8357_GET_GREEN_CHANNEL 0x07 +#define HX8357_GET_BLUE_CHANNEL 0x08 +#define HX8357_GET_POWER_MODE 0x0a +#define HX8357_GET_MADCTL 0x0b +#define HX8357_GET_PIXEL_FORMAT 0x0c +#define HX8357_GET_DISPLAY_MODE 0x0d +#define HX8357_GET_SIGNAL_MODE 0x0e +#define HX8357_GET_DIAGNOSTIC_RESULT 0x0f +#define HX8357_ENTER_SLEEP_MODE 0x10 +#define HX8357_EXIT_SLEEP_MODE 0x11 +#define HX8357_ENTER_PARTIAL_MODE 0x12 +#define HX8357_ENTER_NORMAL_MODE 0x13 +#define HX8357_EXIT_INVERSION_MODE 0x20 +#define HX8357_ENTER_INVERSION_MODE 0x21 +#define HX8357_SET_DISPLAY_OFF 0x28 +#define HX8357_SET_DISPLAY_ON 0x29 +#define HX8357_SET_COLUMN_ADDRESS 0x2a +#define HX8357_SET_PAGE_ADDRESS 0x2b +#define HX8357_WRITE_MEMORY_START 0x2c +#define HX8357_READ_MEMORY_START 0x2e +#define HX8357_SET_PARTIAL_AREA 0x30 +#define HX8357_SET_SCROLL_AREA 0x33 +#define HX8357_SET_TEAR_OFF 0x34 +#define HX8357_SET_TEAR_ON 0x35 +#define HX8357_SET_ADDRESS_MODE 0x36 +#define HX8357_SET_SCROLL_START 0x37 +#define HX8357_EXIT_IDLE_MODE 0x38 +#define HX8357_ENTER_IDLE_MODE 0x39 +#define HX8357_SET_PIXEL_FORMAT 0x3a +#define HX8357_SET_PIXEL_FORMAT_DBI_3BIT (0x1) +#define HX8357_SET_PIXEL_FORMAT_DBI_16BIT (0x5) +#define HX8357_SET_PIXEL_FORMAT_DBI_18BIT (0x6) +#define HX8357_SET_PIXEL_FORMAT_DPI_3BIT (0x1 << 4) +#define HX8357_SET_PIXEL_FORMAT_DPI_16BIT (0x5 << 4) +#define HX8357_SET_PIXEL_FORMAT_DPI_18BIT (0x6 << 4) +#define HX8357_WRITE_MEMORY_CONTINUE 0x3c +#define HX8357_READ_MEMORY_CONTINUE 0x3e +#define HX8357_SET_TEAR_SCAN_LINES 0x44 +#define HX8357_GET_SCAN_LINES 0x45 +#define HX8357_READ_DDB_START 0xa1 +#define HX8357_SET_DISPLAY_MODE 0xb4 +#define HX8357_SET_DISPLAY_MODE_RGB_THROUGH (0x3) +#define HX8357_SET_DISPLAY_MODE_RGB_INTERFACE (1 << 4) +#define HX8357_SET_PANEL_DRIVING 0xc0 +#define HX8357_SET_DISPLAY_FRAME 0xc5 +#define HX8357_SET_RGB 0xc6 +#define HX8357_SET_RGB_ENABLE_HIGH (1 << 1) +#define HX8357_SET_GAMMA 0xc8 +#define HX8357_SET_POWER 0xd0 +#define HX8357_SET_VCOM 0xd1 +#define HX8357_SET_POWER_NORMAL 0xd2 +#define HX8357_SET_PANEL_RELATED 0xe9 + +struct hx8357_data { + unsigned im_pins[HX8357_NUM_IM_PINS]; + unsigned reset; + struct spi_device *spi; + int state; +}; + +static int hx8357_spi_write_then_read(struct lcd_device *lcdev, + void *txbuf, u16 txlen, + void *rxbuf, u16 rxlen) +{ + struct hx8357_data *lcd = lcd_get_data(lcdev); + struct spi_message msg; + struct spi_transfer xfer[2]; + u16 *local_txbuf = NULL; + int ret = 0; + + memset(xfer, 0, sizeof(xfer)); + spi_message_init(&msg); + + if (txlen) { + int i; + + local_txbuf = kcalloc(sizeof(*local_txbuf), txlen, GFP_KERNEL); + + if (!local_txbuf) { + dev_err(&lcdev->dev, "Couldn't allocate data buffer.\n"); + return -ENOMEM; + } + + for (i = 0; i < txlen; i++) { + local_txbuf[i] = ((u8 *)txbuf)[i]; + if (i > 0) + local_txbuf[i] |= 1 << 8; + } + + xfer[0].len = 2 * txlen; + xfer[0].bits_per_word = 9; + xfer[0].tx_buf = local_txbuf; + spi_message_add_tail(&xfer[0], &msg); + } + + if (rxlen) { + xfer[1].len = rxlen; + xfer[1].bits_per_word = 8; + xfer[1].rx_buf = rxbuf; + spi_message_add_tail(&xfer[1], &msg); + } + + ret = spi_sync(lcd->spi, &msg); + if (ret < 0) + dev_err(&lcdev->dev, "Couldn't send SPI data.\n"); + + if (txlen) + kfree(local_txbuf); + + return ret; +} + +static inline int hx8357_spi_write_array(struct lcd_device *lcdev, + u8 *value, u8 len) +{ + return hx8357_spi_write_then_read(lcdev, value, len, NULL, 0); +} + +static inline int hx8357_spi_write_byte(struct lcd_device *lcdev, + u8 value) +{ + return hx8357_spi_write_then_read(lcdev, &value, 1, NULL, 0); +} + +static int hx8357_enter_standby(struct lcd_device *lcdev) +{ + int ret; + + ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_OFF); + if (ret < 0) + return ret; + + usleep_range(10000, 12000); + + ret = hx8357_spi_write_byte(lcdev, HX8357_ENTER_SLEEP_MODE); + if (ret < 0) + return ret; + + msleep(120); + + return 0; +} + +static int hx8357_exit_standby(struct lcd_device *lcdev) +{ + int ret; + + ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE); + if (ret < 0) + return ret; + + msleep(120); + + ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON); + if (ret < 0) + return ret; + + return 0; +} + +static int hx8357_lcd_init(struct lcd_device *lcdev) +{ + struct hx8357_data *lcd = lcd_get_data(lcdev); + u8 buf[16]; + int ret; + + /* + * Set the interface selection pins to SPI mode, with three + * wires + */ + gpio_set_value_cansleep(lcd->im_pins[0], 1); + gpio_set_value_cansleep(lcd->im_pins[1], 0); + gpio_set_value_cansleep(lcd->im_pins[2], 1); + + /* Reset the screen */ + gpio_set_value(lcd->reset, 1); + usleep_range(10000, 12000); + gpio_set_value(lcd->reset, 0); + usleep_range(10000, 12000); + gpio_set_value(lcd->reset, 1); + msleep(120); + + buf[0] = HX8357_SET_POWER; + buf[1] = 0x44; + buf[2] = 0x41; + buf[3] = 0x06; + ret = hx8357_spi_write_array(lcdev, buf, 4); + if (ret < 0) + return ret; + + buf[0] = HX8357_SET_VCOM; + buf[1] = 0x40; + buf[2] = 0x10; + ret = hx8357_spi_write_array(lcdev, buf, 3); + if (ret < 0) + return ret; + + buf[0] = HX8357_SET_POWER_NORMAL; + buf[1] = 0x05; + buf[2] = 0x12; + ret = hx8357_spi_write_array(lcdev, buf, 3); + if (ret < 0) + return ret; + + buf[0] = HX8357_SET_PANEL_DRIVING; + buf[1] = 0x14; + buf[2] = 0x3b; + buf[3] = 0x00; + buf[4] = 0x02; + buf[5] = 0x11; + ret = hx8357_spi_write_array(lcdev, buf, 6); + if (ret < 0) + return ret; + + buf[0] = HX8357_SET_DISPLAY_FRAME; + buf[1] = 0x0c; + ret = hx8357_spi_write_array(lcdev, buf, 2); + if (ret < 0) + return ret; + + buf[0] = HX8357_SET_PANEL_RELATED; + buf[1] = 0x01; + ret = hx8357_spi_write_array(lcdev, buf, 2); + if (ret < 0) + return ret; + + buf[0] = 0xea; + buf[1] = 0x03; + buf[2] = 0x00; + buf[3] = 0x00; + ret = hx8357_spi_write_array(lcdev, buf, 4); + if (ret < 0) + return ret; + + buf[0] = 0xeb; + buf[1] = 0x40; + buf[2] = 0x54; + buf[3] = 0x26; + buf[4] = 0xdb; + ret = hx8357_spi_write_array(lcdev, buf, 5); + if (ret < 0) + return ret; + + buf[0] = HX8357_SET_GAMMA; + buf[1] = 0x00; + buf[2] = 0x15; + buf[3] = 0x00; + buf[4] = 0x22; + buf[5] = 0x00; + buf[6] = 0x08; + buf[7] = 0x77; + buf[8] = 0x26; + buf[9] = 0x77; + buf[10] = 0x22; + buf[11] = 0x04; + buf[12] = 0x00; + ret = hx8357_spi_write_array(lcdev, buf, 13); + if (ret < 0) + return ret; + + buf[0] = HX8357_SET_ADDRESS_MODE; + buf[1] = 0xc0; + ret = hx8357_spi_write_array(lcdev, buf, 2); + if (ret < 0) + return ret; + + buf[0] = HX8357_SET_PIXEL_FORMAT; + buf[1] = HX8357_SET_PIXEL_FORMAT_DPI_18BIT | + HX8357_SET_PIXEL_FORMAT_DBI_18BIT; + ret = hx8357_spi_write_array(lcdev, buf, 2); + if (ret < 0) + return ret; + + buf[0] = HX8357_SET_COLUMN_ADDRESS; + buf[1] = 0x00; + buf[2] = 0x00; + buf[3] = 0x01; + buf[4] = 0x3f; + ret = hx8357_spi_write_array(lcdev, buf, 5); + if (ret < 0) + return ret; + + buf[0] = HX8357_SET_PAGE_ADDRESS; + buf[1] = 0x00; + buf[2] = 0x00; + buf[3] = 0x01; + buf[4] = 0xdf; + ret = hx8357_spi_write_array(lcdev, buf, 5); + if (ret < 0) + return ret; + + buf[0] = HX8357_SET_RGB; + buf[1] = 0x02; + ret = hx8357_spi_write_array(lcdev, buf, 2); + if (ret < 0) + return ret; + + buf[0] = HX8357_SET_DISPLAY_MODE; + buf[1] = HX8357_SET_DISPLAY_MODE_RGB_THROUGH | + HX8357_SET_DISPLAY_MODE_RGB_INTERFACE; + ret = hx8357_spi_write_array(lcdev, buf, 2); + if (ret < 0) + return ret; + + ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE); + if (ret < 0) + return ret; + + msleep(120); + + ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON); + if (ret < 0) + return ret; + + usleep_range(5000, 7000); + + ret = hx8357_spi_write_byte(lcdev, HX8357_WRITE_MEMORY_START); + if (ret < 0) + return ret; + + return 0; +} + +#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL) + +static int hx8357_set_power(struct lcd_device *lcdev, int power) +{ + struct hx8357_data *lcd = lcd_get_data(lcdev); + int ret = 0; + + if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->state)) + ret = hx8357_exit_standby(lcdev); + else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->state)) + ret = hx8357_enter_standby(lcdev); + + if (ret == 0) + lcd->state = power; + else + dev_warn(&lcdev->dev, "failed to set power mode %d\n", power); + + return ret; +} + +static int hx8357_get_power(struct lcd_device *lcdev) +{ + struct hx8357_data *lcd = lcd_get_data(lcdev); + + return lcd->state; +} + +static struct lcd_ops hx8357_ops = { + .set_power = hx8357_set_power, + .get_power = hx8357_get_power, +}; + +static int hx8357_probe(struct spi_device *spi) +{ + struct lcd_device *lcdev; + struct hx8357_data *lcd; + int i, ret; + + lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL); + if (!lcd) { + dev_err(&spi->dev, "Couldn't allocate lcd internal structure!\n"); + return -ENOMEM; + } + + ret = spi_setup(spi); + if (ret < 0) { + dev_err(&spi->dev, "SPI setup failed.\n"); + return ret; + } + + lcd->spi = spi; + + lcd->reset = of_get_named_gpio(spi->dev.of_node, "gpios-reset", 0); + if (!gpio_is_valid(lcd->reset)) { + dev_err(&spi->dev, "Missing dt property: gpios-reset\n"); + return -EINVAL; + } + + ret = devm_gpio_request_one(&spi->dev, lcd->reset, + GPIOF_OUT_INIT_HIGH, + "hx8357-reset"); + if (ret) { + dev_err(&spi->dev, + "failed to request gpio %d: %d\n", + lcd->reset, ret); + return -EINVAL; + } + + for (i = 0; i < HX8357_NUM_IM_PINS; i++) { + lcd->im_pins[i] = of_get_named_gpio(spi->dev.of_node, + "im-gpios", i); + if (lcd->im_pins[i] == -EPROBE_DEFER) { + dev_info(&spi->dev, "GPIO requested is not here yet, deferring the probe\n"); + return -EPROBE_DEFER; + } + if (!gpio_is_valid(lcd->im_pins[i])) { + dev_err(&spi->dev, "Missing dt property: im-gpios\n"); + return -EINVAL; + } + + ret = devm_gpio_request_one(&spi->dev, lcd->im_pins[i], + GPIOF_OUT_INIT_LOW, "im_pins"); + if (ret) { + dev_err(&spi->dev, "failed to request gpio %d: %d\n", + lcd->im_pins[i], ret); + return -EINVAL; + } + } + + lcdev = lcd_device_register("mxsfb", &spi->dev, lcd, &hx8357_ops); + if (IS_ERR(lcdev)) { + ret = PTR_ERR(lcdev); + return ret; + } + spi_set_drvdata(spi, lcdev); + + ret = hx8357_lcd_init(lcdev); + if (ret) { + dev_err(&spi->dev, "Couldn't initialize panel\n"); + goto init_error; + } + + dev_info(&spi->dev, "Panel probed\n"); + + return 0; + +init_error: + lcd_device_unregister(lcdev); + return ret; +} + +static int hx8357_remove(struct spi_device *spi) +{ + struct lcd_device *lcdev = spi_get_drvdata(spi); + + lcd_device_unregister(lcdev); + return 0; +} + +static const struct of_device_id hx8357_dt_ids[] = { + { .compatible = "himax,hx8357" }, + {}, +}; +MODULE_DEVICE_TABLE(of, hx8357_dt_ids); + +static struct spi_driver hx8357_driver = { + .probe = hx8357_probe, + .remove = hx8357_remove, + .driver = { + .name = "hx8357", + .of_match_table = of_match_ptr(hx8357_dt_ids), + }, +}; + +module_spi_driver(hx8357_driver); + +MODULE_AUTHOR("Maxime Ripard "); +MODULE_DESCRIPTION("Himax HX-8357 LCD Driver"); +MODULE_LICENSE("GPL");