From patchwork Sat Jan 26 15:43:57 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Andrew Lunn X-Patchwork-Id: 2049881 Return-Path: X-Original-To: patchwork-linux-arm@patchwork.kernel.org Delivered-To: patchwork-process-083081@patchwork1.kernel.org Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) by patchwork1.kernel.org (Postfix) with ESMTP id A42A13FCDE for ; Sat, 26 Jan 2013 15:47:23 +0000 (UTC) Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.76 #1 (Red Hat Linux)) id 1Tz7wG-0004Yy-23; Sat, 26 Jan 2013 15:45:04 +0000 Received: from londo.lunn.ch ([80.238.139.98]) by merlin.infradead.org with esmtp (Exim 4.76 #1 (Red Hat Linux)) id 1Tz7vo-0004OL-O1 for linux-arm-kernel@lists.infradead.org; Sat, 26 Jan 2013 15:44:40 +0000 Received: from lunn by londo.lunn.ch with local (Exim 3.36 #1 (Debian)) id 1Tz7vI-0000ki-00; Sat, 26 Jan 2013 16:44:04 +0100 From: Andrew Lunn To: Jason Cooper , rjw@sisk.pl Subject: [PATCH v2 1/3] cpufreq: kirkwood: Add a cpufreq driver for Marvell Kirkwood SoCs Date: Sat, 26 Jan 2013 16:43:57 +0100 Message-Id: <1359215039-2848-2-git-send-email-andrew@lunn.ch> X-Mailer: git-send-email 1.7.10.4 In-Reply-To: <1359215039-2848-1-git-send-email-andrew@lunn.ch> References: <1359215039-2848-1-git-send-email-andrew@lunn.ch> X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20130126_104437_202451_5DB71DEF X-CRM114-Status: GOOD ( 23.51 ) X-Spam-Score: -2.6 (--) X-Spam-Report: SpamAssassin version 3.3.2 on merlin.infradead.org summary: Content analysis details: (-2.6 points) pts rule name description ---- ---------------------- -------------------------------------------------- -0.0 SPF_HELO_PASS SPF: HELO matches SPF record -0.0 SPF_PASS SPF: sender matches SPF record -0.7 RP_MATCHES_RCVD Envelope sender domain matches handover relay domain -1.9 BAYES_00 BODY: Bayes spam probability is 0 to 1% [score: 0.0000] Cc: jacmet@sunsite.dk, Andrew Lunn , linux ARM , cpufreq@vger.kernel.org, viresh.kumar@linaro.org X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Sender: linux-arm-kernel-bounces@lists.infradead.org Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org The Marvell Kirkwood SoCs have simple cpufreq support in hardware. The CPU can either use the a high speed cpu clock, or the slower DDR clock. Add a driver to swap between these two clock sources. Signed-off-by: Andrew Lunn --- drivers/clk/mvebu/clk-gating-ctrl.c | 1 + drivers/cpufreq/Kconfig.arm | 6 + drivers/cpufreq/Makefile | 1 + drivers/cpufreq/kirkwood-cpufreq.c | 271 +++++++++++++++++++++++++++++++++++ 4 files changed, 279 insertions(+) create mode 100644 drivers/cpufreq/kirkwood-cpufreq.c diff --git a/drivers/clk/mvebu/clk-gating-ctrl.c b/drivers/clk/mvebu/clk-gating-ctrl.c index 8fa5408..ebf141d 100644 --- a/drivers/clk/mvebu/clk-gating-ctrl.c +++ b/drivers/clk/mvebu/clk-gating-ctrl.c @@ -193,6 +193,7 @@ static const struct mvebu_soc_descr __initconst kirkwood_gating_descr[] = { { "runit", NULL, 7 }, { "xor0", NULL, 8 }, { "audio", NULL, 9 }, + { "powersave", "cpuclk", 11 }, { "sata0", NULL, 14 }, { "sata1", NULL, 15 }, { "xor1", NULL, 16 }, diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index a0b3661..80c8229 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -77,6 +77,12 @@ config ARM_EXYNOS5250_CPUFREQ This adds the CPUFreq driver for Samsung EXYNOS5250 SoC. +config ARM_KIRKWOOD_CPUFREQ + def_bool ARCH_KIRKWOOD && OF + help + This adds the CPUFreq driver for Marvell Kirkwood + SoCs. + config ARM_SPEAR_CPUFREQ bool "SPEAr CPUFreq support" depends on PLAT_SPEAR diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index fadc4d4..39a0ffe 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -50,6 +50,7 @@ obj-$(CONFIG_ARM_EXYNOS_CPUFREQ) += exynos-cpufreq.o obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ) += exynos4210-cpufreq.o obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) += exynos4x12-cpufreq.o obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ) += exynos5250-cpufreq.o +obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ) += kirkwood-cpufreq.o obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o diff --git a/drivers/cpufreq/kirkwood-cpufreq.c b/drivers/cpufreq/kirkwood-cpufreq.c new file mode 100644 index 0000000..300d01d --- /dev/null +++ b/drivers/cpufreq/kirkwood-cpufreq.c @@ -0,0 +1,271 @@ +/* + * kirkwood_freq.c: cpufreq driver for the Marvell kirkwood + * + * Copyright (C) 2013 Andrew Lunn + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define CPU_SW_INT_BLK BIT(28) + + +#include + +static struct priv +{ + struct clk *cpu_clk; + struct clk *ddr_clk; + struct clk *powersave_clk; + struct device *dev; + void __iomem *base; +} priv; + +#define STATE_CPU_FREQ 0x01 +#define STATE_DDR_FREQ 0x02 + +/* + * Kirkwood can swap the clock to the CPU between two clocks: + * + * - cpu clk + * - ddr clk + * + * The frequencies are set at runtime before registering this * + * table. + */ +static struct cpufreq_frequency_table kirkwood_freq_table[] = { + {STATE_CPU_FREQ, 0}, /* CPU uses cpuclk */ + {STATE_DDR_FREQ, 0}, /* CPU uses ddrclk */ + {0, CPUFREQ_TABLE_END}, +}; + +static unsigned int kirkwood_cpufreq_get_cpu_frequency(unsigned int cpu) +{ + if (__clk_is_enabled(priv.powersave_clk)) + return kirkwood_freq_table[1].frequency; + return kirkwood_freq_table[0].frequency; +} + +static void kirkwood_cpufreq_set_cpu_state(unsigned int index) +{ + + struct cpufreq_freqs freqs; + unsigned int state = kirkwood_freq_table[index].index; + unsigned long reg; + + freqs.old = kirkwood_cpufreq_get_cpu_frequency(0); + freqs.new = kirkwood_freq_table[index].frequency; + freqs.cpu = 0; /* Kirkwood is UP */ + + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + dev_dbg(priv.dev, "Attempting to set frequency to %i KHz\n", + kirkwood_freq_table[index].frequency); + dev_dbg(priv.dev, "old frequency was %i KHz\n", + kirkwood_cpufreq_get_cpu_frequency(0)); + + if (freqs.old != freqs.new) { + local_irq_disable(); + + /* Disable interrupts to the CPU */ + reg = readl_relaxed(priv.base); + reg |= CPU_SW_INT_BLK; + writel(reg, priv.base); + + switch (state) { + case STATE_CPU_FREQ: + clk_disable(priv.powersave_clk); + break; + case STATE_DDR_FREQ: + clk_enable(priv.powersave_clk); + break; + default: + dev_err(priv.dev, "Unexpected cpufreq state"); + } + + /* Wait-for-Interrupt, which the hardware changes frequency */ + cpu_do_idle(); + + /* Enable interrupts to the CPU */ + reg = readl_relaxed(priv.base); + reg &= ~CPU_SW_INT_BLK; + writel(reg, priv.base); + + local_irq_enable(); + } + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); +}; + +static int kirkwood_cpufreq_verify(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, &kirkwood_freq_table[0]); +} + +static int kirkwood_cpufreq_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + unsigned int index = 0; + + if (cpufreq_frequency_table_target(policy, kirkwood_freq_table, + target_freq, relation, &index)) + return -EINVAL; + + kirkwood_cpufreq_set_cpu_state(index); + + return 0; +} + +/* + * Module init and exit code + */ +static int kirkwood_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + int result; + + /* cpuinfo and default policy values */ + policy->cpuinfo.transition_latency = 5000; /* 5uS */ + policy->cur = kirkwood_cpufreq_get_cpu_frequency(0); + + result = cpufreq_frequency_table_cpuinfo(policy, kirkwood_freq_table); + if (result) + return result; + + cpufreq_frequency_table_get_attr(kirkwood_freq_table, policy->cpu); + + return 0; +} + +static int kirkwood_cpufreq_cpu_exit(struct cpufreq_policy *policy) +{ + cpufreq_frequency_table_put_attr(policy->cpu); + return 0; +} + +static struct freq_attr *kirkwood_cpufreq_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + + +static struct cpufreq_driver kirkwood_cpufreq_driver = { + .get = kirkwood_cpufreq_get_cpu_frequency, + .verify = kirkwood_cpufreq_verify, + .target = kirkwood_cpufreq_target, + .init = kirkwood_cpufreq_cpu_init, + .exit = kirkwood_cpufreq_cpu_exit, + .name = "kirkwood_freq", + .owner = THIS_MODULE, + .attr = kirkwood_cpufreq_attr, +}; + +static int kirkwood_cpufreq_probe(struct platform_device *pdev) +{ + struct device_node *np = of_find_compatible_node( + NULL, NULL, "marvell,kirkwood-core-clock"); + + struct of_phandle_args clkspec; + struct resource *res; + int err; + + priv.dev = &pdev->dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "Cannot get memory resource\n"); + return -ENODEV; + } + priv.base = devm_request_and_ioremap(&pdev->dev, res); + if (!priv.base) { + dev_err(&pdev->dev, "Cannot ioremap\n"); + return -ENOMEM; + } + + clkspec.np = np; + clkspec.args_count = 1; + clkspec.args[0] = 1; + + priv.cpu_clk = of_clk_get_from_provider(&clkspec); + if (IS_ERR(priv.cpu_clk)) { + dev_err(priv.dev, "Unable to get cpuclk"); + return PTR_ERR(priv.cpu_clk); + } + + clk_prepare_enable(priv.cpu_clk); + kirkwood_freq_table[0].frequency = clk_get_rate(priv.cpu_clk) / 1000; + + clkspec.args[0] = 3; + priv.ddr_clk = of_clk_get_from_provider(&clkspec); + if (IS_ERR(priv.ddr_clk)) { + dev_err(priv.dev, "Unable to get ddrclk"); + err = PTR_ERR(priv.ddr_clk); + goto out_cpu; + } + + clk_prepare_enable(priv.ddr_clk); + kirkwood_freq_table[1].frequency = clk_get_rate(priv.ddr_clk) / 1000; + + np = of_find_compatible_node(NULL, NULL, + "marvell,kirkwood-gating-clock"); + clkspec.np = np; + clkspec.args[0] = 11; + priv.powersave_clk = of_clk_get_from_provider(&clkspec); + if (IS_ERR(priv.powersave_clk)) { + dev_err(priv.dev, "Unable to get powersave"); + err = PTR_ERR(priv.powersave_clk); + goto out_ddr; + } + clk_prepare(priv.powersave_clk); + + err = cpufreq_register_driver(&kirkwood_cpufreq_driver); + if (!err) + return 0; + dev_err(priv.dev, "Failed to register cpufreq driver"); + + clk_disable_unprepare(priv.powersave_clk); +out_ddr: + clk_disable_unprepare(priv.ddr_clk); +out_cpu: + clk_disable_unprepare(priv.cpu_clk); + + return err; +} + + +static int kirkwood_cpufreq_remove(struct platform_device *pdev) +{ + cpufreq_unregister_driver(&kirkwood_cpufreq_driver); + + clk_disable_unprepare(priv.powersave_clk); + clk_disable_unprepare(priv.ddr_clk); + clk_disable_unprepare(priv.cpu_clk); + + return 0; +} + +static struct platform_driver kirkwood_cpufreq_platform_driver = { + .probe = kirkwood_cpufreq_probe, + .remove = kirkwood_cpufreq_remove, + .driver = { + .name = "kirkwood-cpufreq", + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(kirkwood_cpufreq_platform_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Andrew Lunn