@@ -20,6 +20,7 @@ config UX500_SOC_DB8500
select MFD_DB8500_PRCMU
select PINCTRL_DB8500
select PINCTRL_AB8500
+ select PINCTRL_AB8505
select REGULATOR
select REGULATOR_DB8500_PRCMU
@@ -37,6 +37,10 @@ config PINCTRL_AB8500
bool "AB8500 pin controller driver"
depends on PINCTRL_ABX500 && ARCH_U8500
+config PINCTRL_AB8505
+ bool "AB8505 pin controller driver"
+ depends on PINCTRL_ABX500 && ARCH_U8500
+
config PINCTRL_AT91
bool "AT91 pinctrl driver"
depends on OF
@@ -11,6 +11,7 @@ endif
obj-$(CONFIG_GENERIC_PINCONF) += pinconf-generic.o
obj-$(CONFIG_PINCTRL_ABX500) += pinctrl-abx500.o
obj-$(CONFIG_PINCTRL_AB8500) += pinctrl-ab8500.o
+obj-$(CONFIG_PINCTRL_AB8505) += pinctrl-ab8505.o
obj-$(CONFIG_PINCTRL_AT91) += pinctrl-at91.o
obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
obj-$(CONFIG_PINCTRL_IMX) += pinctrl-imx.o
new file mode 100644
@@ -0,0 +1,380 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2012
+ *
+ * Author: Patrice Chotard <patrice.chotard@stericsson.com> for ST-Ericsson.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include "pinctrl-abx500.h"
+
+/* All the pins that can be used for GPIO and some other functions */
+#define ABX500_GPIO(offset) (offset)
+
+#define AB8505_PIN_N4 ABX500_GPIO(1)
+#define AB8505_PIN_R5 ABX500_GPIO(2)
+#define AB8505_PIN_P5 ABX500_GPIO(3)
+/* hole */
+#define AB8505_PIN_B16 ABX500_GPIO(10)
+#define AB8505_PIN_B17 ABX500_GPIO(11)
+/* hole */
+#define AB8505_PIN_D17 ABX500_GPIO(13)
+#define AB8505_PIN_C16 ABX500_GPIO(14)
+/* hole */
+#define AB8505_PIN_P2 ABX500_GPIO(17)
+#define AB8505_PIN_N3 ABX500_GPIO(18)
+#define AB8505_PIN_T1 ABX500_GPIO(19)
+#define AB8505_PIN_P3 ABX500_GPIO(20)
+/* hole */
+#define AB8505_PIN_H14 ABX500_GPIO(34)
+/* hole */
+#define AB8505_PIN_J15 ABX500_GPIO(40)
+#define AB8505_PIN_J14 ABX500_GPIO(41)
+/* hole */
+#define AB8505_PIN_L4 ABX500_GPIO(50)
+/* hole */
+#define AB8505_PIN_D16 ABX500_GPIO(52)
+#define AB8505_PIN_D15 ABX500_GPIO(53)
+
+/* indicates the higher GPIO number */
+#define AB8505_GPIO_MAX_NUMBER 53
+
+/*
+ * The names of the pins are denoted by GPIO number and ball name, even
+ * though they can be used for other things than GPIO, this is the first
+ * column in the table of the data sheet and often used on schematics and
+ * such.
+ */
+static const struct pinctrl_pin_desc ab8505_pins[] = {
+ PINCTRL_PIN(AB8505_PIN_N4, "GPIO1_N4"),
+ PINCTRL_PIN(AB8505_PIN_R5, "GPIO2_R5"),
+ PINCTRL_PIN(AB8505_PIN_P5, "GPIO3_P5"),
+/* hole */
+ PINCTRL_PIN(AB8505_PIN_B16, "GPIO10_B16"),
+ PINCTRL_PIN(AB8505_PIN_B17, "GPIO11_B17"),
+/* hole */
+ PINCTRL_PIN(AB8505_PIN_D17, "GPIO13_D17"),
+ PINCTRL_PIN(AB8505_PIN_C16, "GPIO14_C16"),
+/* hole */
+ PINCTRL_PIN(AB8505_PIN_P2, "GPIO17_P2"),
+ PINCTRL_PIN(AB8505_PIN_N3, "GPIO18_N3"),
+ PINCTRL_PIN(AB8505_PIN_T1, "GPIO19_T1"),
+ PINCTRL_PIN(AB8505_PIN_P3, "GPIO20_P3"),
+/* hole */
+ PINCTRL_PIN(AB8505_PIN_H14, "GPIO34_H14"),
+/* hole */
+ PINCTRL_PIN(AB8505_PIN_J15, "GPIO40_J15"),
+ PINCTRL_PIN(AB8505_PIN_J14, "GPIO41_J14"),
+/* hole */
+ PINCTRL_PIN(AB8505_PIN_L4, "GPIO50_L4"),
+/* hole */
+ PINCTRL_PIN(AB8505_PIN_D16, "GPIO52_D16"),
+ PINCTRL_PIN(AB8505_PIN_D15, "GPIO53_D15"),
+};
+
+/*
+ * Maps local GPIO offsets to local pin numbers
+ */
+static const struct abx500_pinrange ab8505_pinranges[] = {
+ ABX500_PINRANGE(1, 3, ABX500_ALT_A),
+ ABX500_PINRANGE(10, 2, ABX500_DEFAULT),
+ ABX500_PINRANGE(13, 1, ABX500_DEFAULT),
+ ABX500_PINRANGE(14, 1, ABX500_ALT_A),
+ ABX500_PINRANGE(17, 4, ABX500_ALT_A),
+ ABX500_PINRANGE(34, 1, ABX500_ALT_A),
+ ABX500_PINRANGE(40, 2, ABX500_ALT_A),
+ ABX500_PINRANGE(50, 1, ABX500_DEFAULT),
+ ABX500_PINRANGE(52, 2, ABX500_ALT_A),
+};
+
+/*
+ * Read the pin group names like this:
+ * sysclkreq2_d_1 = first groups of pins for sysclkreq2 on default function
+ *
+ * The groups are arranged as sets per altfunction column, so we can
+ * mux in one group at a time by selecting the same altfunction for them
+ * all. When functions require pins on different altfunctions, you need
+ * to combine several groups.
+ */
+
+/* default column */
+static const unsigned sysclkreq2_d_1_pins[] = { AB8505_PIN_N4 };
+static const unsigned sysclkreq3_d_1_pins[] = { AB8505_PIN_R5 };
+static const unsigned sysclkreq4_d_1_pins[] = { AB8505_PIN_P5 };
+static const unsigned gpio10_d_1_pins[] = { AB8505_PIN_B16 };
+static const unsigned gpio11_d_1_pins[] = { AB8505_PIN_B17 };
+static const unsigned gpio13_d_1_pins[] = { AB8505_PIN_D17 };
+static const unsigned pwmout1_d_1_pins[] = { AB8505_PIN_C16 };
+/* audio data interface 2*/
+static const unsigned adi2_d_1_pins[] = { AB8505_PIN_P2, AB8505_PIN_N3,
+ AB8505_PIN_T1, AB8505_PIN_P3 };
+static const unsigned extcpena_d_1_pins[] = { AB8505_PIN_H14 };
+/* modem SDA/SCL */
+static const unsigned modsclsda_d_1_pins[] = { AB8505_PIN_J15, AB8505_PIN_J14 };
+static const unsigned gpio50_d_1_pins[] = { AB8505_PIN_L4 };
+static const unsigned resethw_d_1_pins[] = { AB8505_PIN_D16 };
+static const unsigned service_d_1_pins[] = { AB8505_PIN_D15 };
+
+/* Altfunction A column */
+static const unsigned gpio1_a_1_pins[] = { AB8505_PIN_N4 };
+static const unsigned gpio2_a_1_pins[] = { AB8505_PIN_R5 };
+static const unsigned gpio3_a_1_pins[] = { AB8505_PIN_P5 };
+static const unsigned hiqclkena_a_1_pins[] = { AB8505_PIN_B16 };
+static const unsigned pdmclk_a_1_pins[] = { AB8505_PIN_B17 };
+static const unsigned uarttxdata_a_1_pins[] = { AB8505_PIN_D17 };
+static const unsigned gpio14_a_1_pins[] = { AB8505_PIN_C16 };
+static const unsigned gpio17_a_1_pins[] = { AB8505_PIN_P2 };
+static const unsigned gpio18_a_1_pins[] = { AB8505_PIN_N3 };
+static const unsigned gpio19_a_1_pins[] = { AB8505_PIN_T1 };
+static const unsigned gpio20_a_1_pins[] = { AB8505_PIN_P3 };
+static const unsigned gpio34_a_1_pins[] = { AB8505_PIN_H14 };
+static const unsigned gpio40_a_1_pins[] = { AB8505_PIN_J15 };
+static const unsigned gpio41_a_1_pins[] = { AB8505_PIN_J14 };
+static const unsigned uartrxdata_a_1_pins[] = { AB8505_PIN_J14 };
+static const unsigned gpio50_a_1_pins[] = { AB8505_PIN_L4 };
+static const unsigned gpio52_a_1_pins[] = { AB8505_PIN_D16 };
+static const unsigned gpio53_a_1_pins[] = { AB8505_PIN_D15 };
+
+/* Altfunction B colum */
+static const unsigned pdmdata_b_1_pins[] = { AB8505_PIN_B16 };
+static const unsigned extvibrapwm1_b_1_pins[] = { AB8505_PIN_D17 };
+static const unsigned extvibrapwm2_b_1_pins[] = { AB8505_PIN_L4 };
+
+/* Altfunction C column */
+static const unsigned usbvdat_c_1_pins[] = { AB8505_PIN_D17 };
+
+#define AB8505_PIN_GROUP(a, b) { .name = #a, .pins = a##_pins, \
+ .npins = ARRAY_SIZE(a##_pins), .altsetting = b }
+
+static const struct abx500_pingroup ab8505_groups[] = {
+ AB8505_PIN_GROUP(sysclkreq2_d_1, ABX500_DEFAULT),
+ AB8505_PIN_GROUP(sysclkreq3_d_1, ABX500_DEFAULT),
+ AB8505_PIN_GROUP(sysclkreq4_d_1, ABX500_DEFAULT),
+ AB8505_PIN_GROUP(gpio10_d_1, ABX500_DEFAULT),
+ AB8505_PIN_GROUP(gpio11_d_1, ABX500_DEFAULT),
+ AB8505_PIN_GROUP(gpio13_d_1, ABX500_DEFAULT),
+ AB8505_PIN_GROUP(pwmout1_d_1, ABX500_DEFAULT),
+ AB8505_PIN_GROUP(adi2_d_1, ABX500_DEFAULT),
+ AB8505_PIN_GROUP(extcpena_d_1, ABX500_DEFAULT),
+ AB8505_PIN_GROUP(modsclsda_d_1, ABX500_DEFAULT),
+ AB8505_PIN_GROUP(gpio50_d_1, ABX500_DEFAULT),
+ AB8505_PIN_GROUP(resethw_d_1, ABX500_DEFAULT),
+ AB8505_PIN_GROUP(service_d_1, ABX500_DEFAULT),
+ AB8505_PIN_GROUP(gpio1_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(gpio2_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(gpio3_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(hiqclkena_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(pdmclk_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(uarttxdata_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(gpio14_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(gpio17_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(gpio18_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(gpio19_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(gpio20_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(gpio34_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(gpio40_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(gpio41_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(uartrxdata_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(gpio52_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(gpio53_a_1, ABX500_ALT_A),
+ AB8505_PIN_GROUP(pdmdata_b_1, ABX500_ALT_B),
+ AB8505_PIN_GROUP(extvibrapwm1_b_1, ABX500_ALT_B),
+ AB8505_PIN_GROUP(extvibrapwm2_b_1, ABX500_ALT_B),
+ AB8505_PIN_GROUP(usbvdat_c_1, ABX500_ALT_C),
+};
+
+/* We use this macro to define the groups applicable to a function */
+#define AB8505_FUNC_GROUPS(a, b...) \
+static const char * const a##_groups[] = { b };
+
+AB8505_FUNC_GROUPS(sysclkreq, "sysclkreq2_d_1", "sysclkreq3_d_1",
+ "sysclkreq4_d_1");
+AB8505_FUNC_GROUPS(gpio, "gpio1_a_1", "gpio2_a_1", "gpio3_a_1",
+ "gpio10_d_1", "gpio11_d_1", "gpio13_d_1", "gpio14_a_1",
+ "gpio17_a_1", "gpio18_a_1", "gpio19_a_1", "gpio20_a_1",
+ "gpio34_a_1", "gpio40_a_1", "gpio41_a_1", "gpio50_d_1",
+ "gpio52_a_1", "gpio53_a_1");
+AB8505_FUNC_GROUPS(pwmout, "pwmout1_d_1");
+AB8505_FUNC_GROUPS(adi2, "adi2_d_1");
+AB8505_FUNC_GROUPS(extcpena, "extcpena_d_1");
+AB8505_FUNC_GROUPS(modsclsda, "modsclsda_d_1");
+AB8505_FUNC_GROUPS(resethw, "resethw_d_1");
+AB8505_FUNC_GROUPS(service, "service_d_1");
+AB8505_FUNC_GROUPS(hiqclkena, "hiqclkena_a_1");
+AB8505_FUNC_GROUPS(pdm, "pdmclk_a_1", "pdmdata_b_1");
+AB8505_FUNC_GROUPS(uartdata, "uarttxdata_a_1", "uartrxdata_a_1");
+AB8505_FUNC_GROUPS(extvibra, "extvibrapwm1_b_1", "extvibrapwm2_b_1");
+AB8505_FUNC_GROUPS(usbvdat, "usbvdat_c_1");
+
+#define FUNCTION(fname) \
+ { \
+ .name = #fname, \
+ .groups = fname##_groups, \
+ .ngroups = ARRAY_SIZE(fname##_groups), \
+ }
+
+static const struct abx500_function ab8505_functions[] = {
+ FUNCTION(sysclkreq),
+ FUNCTION(gpio),
+ FUNCTION(pwmout),
+ FUNCTION(adi2),
+ FUNCTION(extcpena),
+ FUNCTION(modsclsda),
+ FUNCTION(resethw),
+ FUNCTION(service),
+ FUNCTION(hiqclkena),
+ FUNCTION(pdm),
+ FUNCTION(uartdata),
+ FUNCTION(extvibra),
+ FUNCTION(extvibra),
+ FUNCTION(usbvdat),
+};
+
+/*
+ * this table translates what's is in the AB8505 specification regarding the
+ * balls alternate functions (as for DB, default, ALT_A, ALT_B and ALT_C).
+ * ALTERNATE_FUNCTIONS(GPIO_NUMBER, GPIOSEL bit, ALTERNATFUNC bit1,
+ * ALTERNATEFUNC bit2, ALTA val, ALTB val, ALTC val),
+ *
+ * example :
+ *
+ * ALTERNATE_FUNCTIONS(13, 4, 3, 4, 1, 0, 2),
+ * means that pin AB8505_PIN_D18 (pin 13) supports 4 mux (default/ALT_A,
+ * ALT_B and ALT_C), so GPIOSEL and ALTERNATFUNC registers are used to
+ * select the mux. ALTA, ALTB and ALTC val indicates values to write in
+ * ALTERNATFUNC register. We need to specifies these values as SOC
+ * designers didn't apply the same logic on how to select mux in the
+ * ABx500 family.
+ *
+ * As this pins supports at least ALT_B mux, default mux is
+ * selected by writing 1 in GPIOSEL bit :
+ *
+ * | GPIOSEL bit=4 | alternatfunc bit2=4 | alternatfunc bit1=3
+ * default | 1 | 0 | 0
+ * alt_A | 0 | 0 | 1
+ * alt_B | 0 | 0 | 0
+ * alt_C | 0 | 1 | 0
+ *
+ * ALTERNATE_FUNCTIONS(1, 0, UNUSED, UNUSED),
+ * means that pin AB9540_PIN_R4 (pin 1) supports 2 mux, so only GPIOSEL
+ * register is used to select the mux. As this pins doesn't support at
+ * least ALT_B mux, default mux is by writing 0 in GPIOSEL bit :
+ *
+ * | GPIOSEL bit=0 | alternatfunc bit2= | alternatfunc bit1=
+ * default | 0 | 0 | 0
+ * alt_A | 1 | 0 | 0
+ */
+
+struct alternate_functions ab8505_alternate_functions[AB8505_GPIO_MAX_NUMBER + 1] = {
+ ALTERNATE_FUNCTIONS(0, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO0 */
+ ALTERNATE_FUNCTIONS(1, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO1, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(2, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO2, altA controlled by bit 1 */
+ ALTERNATE_FUNCTIONS(3, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO3, altA controlled by bit 2*/
+ ALTERNATE_FUNCTIONS(4, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO4, bit 3 reserved */
+ ALTERNATE_FUNCTIONS(5, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO5, bit 4 reserved */
+ ALTERNATE_FUNCTIONS(6, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO6, bit 5 reserved */
+ ALTERNATE_FUNCTIONS(7, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO7, bit 6 reserved */
+ ALTERNATE_FUNCTIONS(8, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO8, bit 7 reserved */
+
+ ALTERNATE_FUNCTIONS(9, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO9, bit 0 reserved */
+ ALTERNATE_FUNCTIONS(10, 1, 0, UNUSED, 1, 0, 0), /* GPIO10, altA and altB controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(11, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO11, altA controlled by bit 2 */
+ ALTERNATE_FUNCTIONS(12, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO12, bit3 reseved */
+ ALTERNATE_FUNCTIONS(13, 4, 3, 4, 1, 0, 2), /* GPIO13, altA altB and altC controlled by bit 3 and 4 */
+ ALTERNATE_FUNCTIONS(14, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO14, altA controlled by bit 5 */
+ ALTERNATE_FUNCTIONS(15, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO15, bit 6 reserved */
+ ALTERNATE_FUNCTIONS(16, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO15, bit 7 reserved */
+ /*
+ * pins 17 to 20 are special case, only bit 0 is used to select
+ * alternate function for these 4 pins.
+ * bits 1 to 3 are reserved
+ */
+ ALTERNATE_FUNCTIONS(17, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO17, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(18, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO18, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(19, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO19, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(20, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO20, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(21, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO21, bit 4 reserved */
+ ALTERNATE_FUNCTIONS(22, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO22, bit 5 reserved */
+ ALTERNATE_FUNCTIONS(23, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO23, bit 6 reserved */
+ ALTERNATE_FUNCTIONS(24, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO24, bit 7 reserved */
+
+ ALTERNATE_FUNCTIONS(25, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO25, bit 0 reserved */
+ ALTERNATE_FUNCTIONS(26, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO26, bit 1 reserved */
+ ALTERNATE_FUNCTIONS(27, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO27, bit 2 reserved */
+ ALTERNATE_FUNCTIONS(28, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO28, bit 3 reserved */
+ ALTERNATE_FUNCTIONS(29, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO29, bit 4 reserved */
+ ALTERNATE_FUNCTIONS(30, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO30, bit 5 reserved */
+ ALTERNATE_FUNCTIONS(31, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO31, bit 6 reserved */
+ ALTERNATE_FUNCTIONS(32, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO32, bit 7 reserved */
+
+ ALTERNATE_FUNCTIONS(33, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO33, bit 0 reserved */
+ ALTERNATE_FUNCTIONS(34, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO34, altA controlled by bit 1 */
+ ALTERNATE_FUNCTIONS(35, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO35, bit 2 reserved */
+ ALTERNATE_FUNCTIONS(36, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO36, bit 2 reserved */
+ ALTERNATE_FUNCTIONS(37, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO37, bit 2 reserved */
+ ALTERNATE_FUNCTIONS(38, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO38, bit 2 reserved */
+ ALTERNATE_FUNCTIONS(39, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO39, bit 2 reserved */
+ ALTERNATE_FUNCTIONS(40, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO40, altA controlled by bit 7*/
+
+ ALTERNATE_FUNCTIONS(41, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO41, altA controlled by bit 0 */
+ ALTERNATE_FUNCTIONS(42, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO42, bit 1 reserved */
+ ALTERNATE_FUNCTIONS(43, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO43, bit 2 reserved */
+ ALTERNATE_FUNCTIONS(44, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO44, bit 3 reserved */
+ ALTERNATE_FUNCTIONS(45, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO45, bit 4 reserved */
+ ALTERNATE_FUNCTIONS(46, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO46, bit 5 reserved */
+ ALTERNATE_FUNCTIONS(47, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO47, bit 6 reserved */
+ ALTERNATE_FUNCTIONS(48, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO48, bit 7 reserved */
+
+ ALTERNATE_FUNCTIONS(49, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO49, bit 0 reserved */
+ ALTERNATE_FUNCTIONS(50, 1, 2, UNUSED, 1, 0, 0), /* GPIO50, altA controlled by bit 1 */
+ ALTERNATE_FUNCTIONS(51, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO49, bit 0 reserved */
+ ALTERNATE_FUNCTIONS(52, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO52, altA controlled by bit 3 */
+ ALTERNATE_FUNCTIONS(53, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO53, altA controlled by bit 4 */
+};
+
+/*
+ * For AB8505 Only some GPIOs are interrupt capable, and they are
+ * organized in discontiguous clusters:
+ *
+ * GPIO10 to GPIO11
+ * GPIO13
+ * GPIO40 and GPIO41
+ * GPIO50
+ * GPIO52 to GPIO53
+ */
+struct abx500_gpio_irq_cluster ab8505_gpio_irq_cluster[] = {
+ GPIO_IRQ_CLUSTER(9, 10, 0), /* GPIO numbers start from 1 */
+ GPIO_IRQ_CLUSTER(12, 12, 0),
+ GPIO_IRQ_CLUSTER(39, 40, 0),
+ GPIO_IRQ_CLUSTER(49, 49, 0),
+ GPIO_IRQ_CLUSTER(51, 52, 0),
+};
+
+static struct abx500_pinctrl_soc_data ab8505_soc = {
+ .gpio_ranges = ab8505_pinranges,
+ .gpio_num_ranges = ARRAY_SIZE(ab8505_pinranges),
+ .pins = ab8505_pins,
+ .npins = ARRAY_SIZE(ab8505_pins),
+ .functions = ab8505_functions,
+ .nfunctions = ARRAY_SIZE(ab8505_functions),
+ .groups = ab8505_groups,
+ .ngroups = ARRAY_SIZE(ab8505_groups),
+ .alternate_functions = ab8505_alternate_functions,
+ .gpio_irq_cluster = ab8505_gpio_irq_cluster,
+ .ngpio_irq_cluster = ARRAY_SIZE(ab8505_gpio_irq_cluster),
+ .irq_gpio_rising_offset = AB8500_INT_GPIO6R,
+ .irq_gpio_falling_offset = AB8500_INT_GPIO6F,
+ .irq_gpio_factor = 1,
+};
+
+void __devinit
+abx500_pinctrl_ab8505_init(struct abx500_pinctrl_soc_data **soc)
+{
+ *soc = &ab8505_soc;
+}
@@ -1119,6 +1119,9 @@ static int abx500_gpio_probe(struct platform_device *pdev)
case PINCTRL_AB8500:
abx500_pinctrl_ab8500_init(&pct->soc);
break;
+ case PINCTRL_AB8505:
+ abx500_pinctrl_ab8505_init(&pct->soc);
+ break;
default:
dev_err(&pdev->dev, "Unsupported pinctrl sub driver (%d)\n",
(int) platid->driver_data);
@@ -190,4 +190,17 @@ abx500_pinctrl_ab8500_init(struct abx500_pinctrl_soc_data **soc)
#endif
+#ifdef CONFIG_PINCTRL_AB8505
+
+void abx500_pinctrl_ab8505_init(struct abx500_pinctrl_soc_data **soc);
+
+#else
+
+static inline void
+abx500_pinctrl_ab8505_init(struct abx500_pinctrl_soc_data **soc)
+{
+}
+
+#endif
+
#endif /* PINCTRL_PINCTRL_ABx500_H */