@@ -2,8 +2,12 @@ if ARCH_DOVE
menu "Marvell Dove Implementations"
+config DOVE_LEGACY
+ bool
+
config MACH_DOVE_DB
bool "Marvell DB-MV88AP510 Development Board"
+ select DOVE_LEGACY
select I2C_BOARDINFO
help
Say 'Y' here if you want your kernel to support the
@@ -11,6 +15,7 @@ config MACH_DOVE_DB
config MACH_CM_A510
bool "CompuLab CM-A510 Board"
+ select DOVE_LEGACY
help
Say 'Y' here if you want your kernel to support the
CompuLab CM-A510 Board.
@@ -1,4 +1,6 @@
-obj-y += common.o addr-map.o irq.o mpp.o
+obj-y += common.o addr-map.o irq.o
+obj-$(CONFIG_DOVE_LEGACY) += mpp.o
obj-$(CONFIG_PCI) += pcie.o
obj-$(CONFIG_MACH_DOVE_DB) += dove-db-setup.o
+obj-$(CONFIG_MACH_DOVE_DT) += board-dt.o
obj-$(CONFIG_MACH_CM_A510) += cm-a510.o
new file mode 100644
@@ -0,0 +1,103 @@
+/*
+ * arch/arm/mach-dove/board-dt.c
+ *
+ * Marvell Dove 88AP510 System On Chip FDT Board
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/clk-provider.h>
+#include <linux/clk/mvebu.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_data/usb-ehci-orion.h>
+#include <asm/hardware/cache-tauros2.h>
+#include <asm/mach/arch.h>
+#include <mach/pm.h>
+#include <plat/common.h>
+#include <plat/irq.h>
+#include "common.h"
+
+/*
+ * There are still devices that doesn't even know about DT,
+ * get clock gates here and add a clock lookup.
+ */
+static void __init dove_legacy_clk_init(void)
+{
+ struct device_node *np = of_find_compatible_node(NULL, NULL,
+ "marvell,dove-gating-clock");
+ struct of_phandle_args clkspec;
+
+ clkspec.np = np;
+ clkspec.args_count = 1;
+
+ clkspec.args[0] = CLOCK_GATING_BIT_USB0;
+ orion_clkdev_add(NULL, "orion-ehci.0",
+ of_clk_get_from_provider(&clkspec));
+
+ clkspec.args[0] = CLOCK_GATING_BIT_USB1;
+ orion_clkdev_add(NULL, "orion-ehci.1",
+ of_clk_get_from_provider(&clkspec));
+
+ clkspec.args[0] = CLOCK_GATING_BIT_GBE;
+ orion_clkdev_add(NULL, "mv643xx_eth_port.0",
+ of_clk_get_from_provider(&clkspec));
+
+ clkspec.args[0] = CLOCK_GATING_BIT_PCIE0;
+ orion_clkdev_add("0", "pcie",
+ of_clk_get_from_provider(&clkspec));
+
+ clkspec.args[0] = CLOCK_GATING_BIT_PCIE1;
+ orion_clkdev_add("1", "pcie",
+ of_clk_get_from_provider(&clkspec));
+}
+
+static void __init dove_of_clk_init(void)
+{
+ mvebu_clocks_init();
+ dove_legacy_clk_init();
+}
+
+static struct mv643xx_eth_platform_data dove_dt_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT,
+};
+
+static void __init dove_dt_init(void)
+{
+ pr_info("Dove 88AP510 SoC\n");
+
+#ifdef CONFIG_CACHE_TAUROS2
+ tauros2_init(0);
+#endif
+ dove_setup_cpu_mbus();
+
+ /* Setup root of clk tree */
+ dove_of_clk_init();
+
+ /* Internal devices not ported to DT yet */
+ dove_rtc_init();
+ dove_ge00_init(&dove_dt_ge00_data);
+ dove_ehci0_init();
+ dove_ehci1_init();
+ dove_pcie_init(1, 1);
+
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char * const dove_dt_board_compat[] = {
+ "marvell,dove",
+ NULL
+};
+
+DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)")
+ .map_io = dove_map_io,
+ .init_early = dove_init_early,
+ .init_irq = orion_dt_init_irq,
+ .timer = &dove_timer,
+ .init_machine = dove_dt_init,
+ .restart = dove_restart,
+ .dt_compat = dove_dt_board_compat,
+MACHINE_END
@@ -9,22 +9,17 @@
*/
#include <linux/clk-provider.h>
-#include <linux/clk/mvebu.h>
#include <linux/dma-mapping.h>
#include <linux/init.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
#include <linux/platform_data/dma-mv_xor.h>
#include <linux/platform_data/usb-ehci-orion.h>
#include <linux/platform_device.h>
#include <asm/hardware/cache-tauros2.h>
-#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <mach/bridge-regs.h>
#include <mach/pm.h>
#include <plat/common.h>
-#include <plat/irq.h>
#include <plat/time.h>
#include "common.h"
@@ -364,88 +359,3 @@ void dove_restart(char mode, const char *cmd)
while (1)
;
}
-
-#if defined(CONFIG_MACH_DOVE_DT)
-/*
- * There are still devices that doesn't even know about DT,
- * get clock gates here and add a clock lookup.
- */
-static void __init dove_legacy_clk_init(void)
-{
- struct device_node *np = of_find_compatible_node(NULL, NULL,
- "marvell,dove-gating-clock");
- struct of_phandle_args clkspec;
-
- clkspec.np = np;
- clkspec.args_count = 1;
-
- clkspec.args[0] = CLOCK_GATING_BIT_USB0;
- orion_clkdev_add(NULL, "orion-ehci.0",
- of_clk_get_from_provider(&clkspec));
-
- clkspec.args[0] = CLOCK_GATING_BIT_USB1;
- orion_clkdev_add(NULL, "orion-ehci.1",
- of_clk_get_from_provider(&clkspec));
-
- clkspec.args[0] = CLOCK_GATING_BIT_GBE;
- orion_clkdev_add(NULL, "mv643xx_eth_port.0",
- of_clk_get_from_provider(&clkspec));
-
- clkspec.args[0] = CLOCK_GATING_BIT_PCIE0;
- orion_clkdev_add("0", "pcie",
- of_clk_get_from_provider(&clkspec));
-
- clkspec.args[0] = CLOCK_GATING_BIT_PCIE1;
- orion_clkdev_add("1", "pcie",
- of_clk_get_from_provider(&clkspec));
-}
-
-static void __init dove_of_clk_init(void)
-{
- mvebu_clocks_init();
- dove_legacy_clk_init();
-}
-
-static struct mv643xx_eth_platform_data dove_dt_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT,
-};
-
-static void __init dove_dt_init(void)
-{
- pr_info("Dove 88AP510 SoC, TCLK = %d MHz.\n",
- (dove_tclk + 499999) / 1000000);
-
-#ifdef CONFIG_CACHE_TAUROS2
- tauros2_init(0);
-#endif
- dove_setup_cpu_mbus();
-
- /* Setup root of clk tree */
- dove_of_clk_init();
-
- /* Internal devices not ported to DT yet */
- dove_rtc_init();
-
- dove_ge00_init(&dove_dt_ge00_data);
- dove_ehci0_init();
- dove_ehci1_init();
- dove_pcie_init(1, 1);
-
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char * const dove_dt_board_compat[] = {
- "marvell,dove",
- NULL
-};
-
-DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)")
- .map_io = dove_map_io,
- .init_early = dove_init_early,
- .init_irq = orion_dt_init_irq,
- .timer = &dove_timer,
- .init_machine = dove_dt_init,
- .restart = dove_restart,
- .dt_compat = dove_dt_board_compat,
-MACHINE_END
-#endif
@@ -25,6 +25,7 @@ void dove_init_early(void);
void dove_init_irq(void);
void dove_setup_cpu_mbus(void);
void dove_ge00_init(struct mv643xx_eth_platform_data *eth_data);
+void dove_rtc_init(void);
void dove_sata_init(struct mv_sata_platform_data *sata_data);
#ifdef CONFIG_PCI
void dove_pcie_init(int init_port0, int init_port1);
In the beginning of DT for Dove it was reasonable to have it close to non-DT code. With improved DT support, it became more and more difficult to not break non-DT while changing DT code. This patch splits up DT board setup and introduces a DOVE_LEGACY config to allow to remove legacy code for DT-only kernels. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> --- Changelog: [v3] - also include new board-dt.c file that was missing in v2 of patch [2/2] (patch [1/2] has not changed and is not resent) Cc: Russell King <linux@arm.linux.org.uk> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org --- arch/arm/mach-dove/Kconfig | 5 ++ arch/arm/mach-dove/Makefile | 4 +- arch/arm/mach-dove/board-dt.c | 103 +++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-dove/common.c | 90 ----------------------------------- arch/arm/mach-dove/common.h | 1 + 5 files changed, 112 insertions(+), 91 deletions(-) create mode 100644 arch/arm/mach-dove/board-dt.c