@@ -30,6 +30,15 @@
rtc0: rtc@1c23000 {
status = "okay";
};
+ mmc0: mmc@1c40000 {
+ max-frequency = <50000000>;
+ mmc-cap-sd-highspeed;
+ mmc-cap-mmc-highspeed;
+ bus-width = <4>;
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ };
};
nand_cs3@62000000 {
status = "okay";
@@ -56,6 +56,15 @@
0x30 0x01100000 0x0ff00000
>;
};
+ mmc0_pins: pinmux_mmc_pins {
+ pinctrl-single,bits = <
+ /* MMCSD0_DAT[3] MMCSD0_DAT[2]
+ * MMCSD0_DAT[1] MMCSD0_DAT[0]
+ * MMCSD0_CMD MMCSD0_CLK
+ */
+ 0x28 0x00222222 0x00ffffff
+ >;
+ };
};
serial0: serial@1c42000 {
compatible = "ns16550a";
@@ -88,6 +97,12 @@
19>;
status = "disabled";
};
+ mmc0: mmc@1c40000 {
+ compatible = "ti,davinci-mmc-da830";
+ reg = <0x40000 0x1000>;
+ interrupts = <16>;
+ status = "disabled";
+ };
};
nand_cs3@62000000 {
compatible = "ti,davinci-nand";
Add DT entry for MMC. Also add entry for pinmux information. Tested on da850-evm without card detect and EDMA support as DT support for GPIO and EDMA are yet come. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Cc: linux-mmc@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: davinci-linux-open-source@linux.davincidsp.com Cc: devicetree-discuss@lists.ozlabs.org Cc: cjb@laptop.org Cc: Sekhar Nori <nsekhar@ti.com> --- Since v1: Removed bitfields for specifying the device capabilty and accomodate controller revision in compatible field. arch/arm/boot/dts/da850-evm.dts | 9 +++++++++ arch/arm/boot/dts/da850.dtsi | 15 +++++++++++++++ 2 files changed, 24 insertions(+), 0 deletions(-)