@@ -169,7 +169,8 @@ static struct clk *periph_clocks[] __initdata = {
};
static struct clk_lookup periph_clocks_lookups[] = {
- CLKDEV_CON_DEV_ID("hclk", "atmel_lcdfb.0", &hck1),
+ CLKDEV_CON_DEV_ID("hclk", "at91sam9261-lcdfb.0", &hck1),
+ CLKDEV_CON_DEV_ID("hclk", "at91sam9g10-lcdfb.0", &hck1),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
@@ -488,7 +488,6 @@ static struct resource lcdc_resources[] = {
};
static struct platform_device at91_lcdc_device = {
- .name = "atmel_lcdfb",
.id = 0,
.dev = {
.dma_mask = &lcdc_dmamask,
@@ -505,6 +504,11 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
return;
}
+ if (cpu_is_at91sam9g10())
+ at91_lcdc_device.name = "at91sam9g10-lcdfb";
+ else
+ at91_lcdc_device.name = "at91sam9261-lcdfb";
+
#if defined(CONFIG_FB_ATMEL_STN)
at91_set_A_periph(AT91_PIN_PB0, 0); /* LCDVSYNC */
at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */
@@ -190,7 +190,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.1", &ssc1_clk),
CLKDEV_CON_DEV_ID("pclk", "fff98000.ssc", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "fff9c000.ssc", &ssc1_clk),
- CLKDEV_CON_DEV_ID("hclk", "atmel_lcdfb.0", &lcdc_clk),
+ CLKDEV_CON_DEV_ID("hclk", "at91sam9263-lcdfb.0", &lcdc_clk),
CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk),
CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
@@ -848,7 +848,7 @@ static struct resource lcdc_resources[] = {
};
static struct platform_device at91_lcdc_device = {
- .name = "atmel_lcdfb",
+ .name = "at91sam9263-lcdfb",
.id = 0,
.dev = {
.dma_mask = &lcdc_dmamask,
@@ -228,7 +228,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_ID("hclk", &macb_clk),
/* One additional fake clock for ohci */
CLKDEV_CON_ID("ohci_clk", &uhphs_clk),
- CLKDEV_CON_DEV_ID("hclk", "atmel_lcdfb.0", &lcdc_clk),
+ CLKDEV_CON_DEV_ID("hclk", "at91sam9g45-lcdfb.0", &lcdc_clk),
+ CLKDEV_CON_DEV_ID("hclk", "at91sam9g45es-lcdfb.0", &lcdc_clk),
CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci", &uhphs_clk),
CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
@@ -981,7 +981,6 @@ static struct resource lcdc_resources[] = {
};
static struct platform_device at91_lcdc_device = {
- .name = "atmel_lcdfb",
.id = 0,
.dev = {
.dma_mask = &lcdc_dmamask,
@@ -997,6 +996,11 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
if (!data)
return;
+ if (cpu_is_at91sam9g45es())
+ at91_lcdc_device.name = "at91sam9g45es-lcdfb";
+ else
+ at91_lcdc_device.name = "at91sam9g45-lcdfb";
+
at91_set_A_periph(AT91_PIN_PE0, 0); /* LCDDPWR */
at91_set_A_periph(AT91_PIN_PE2, 0); /* LCDCC */
@@ -179,7 +179,7 @@ static struct clk *periph_clocks[] __initdata = {
};
static struct clk_lookup periph_clocks_lookups[] = {
- CLKDEV_CON_DEV_ID("hclk", "atmel_lcdfb.0", &lcdc_clk),
+ CLKDEV_CON_DEV_ID("hclk", "at91sam9rl-lcdfb.0", &lcdc_clk),
CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
@@ -514,7 +514,7 @@ static struct resource lcdc_resources[] = {
};
static struct platform_device at91_lcdc_device = {
- .name = "atmel_lcdfb",
+ .name = "at91sam9rl-lcdfb",
.id = 0,
.dev = {
.dma_mask = &lcdc_dmamask,
@@ -1530,6 +1530,8 @@ at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
memcpy(info, data, sizeof(struct atmel_lcdfb_info));
info->default_monspecs = monspecs;
+ pdev->name = "at32ap-lcdfb";
+
platform_device_register(pdev);
return pdev;
@@ -34,6 +34,77 @@
#define ATMEL_LCDC_DMA_BURST_LEN 8 /* words */
#define ATMEL_LCDC_FIFO_SIZE 512 /* words */
+struct atmel_lcdfb_config {
+ bool have_alt_pixclock;
+ bool have_hozval;
+ bool have_intensity_bit;
+};
+
+static struct atmel_lcdfb_config at91sam9261_config = {
+ .have_hozval = true,
+ .have_intensity_bit = true,
+};
+
+static struct atmel_lcdfb_config at91sam9263_config = {
+ .have_intensity_bit = true,
+};
+
+static struct atmel_lcdfb_config at91sam9g10_config = {
+ .have_hozval = true,
+};
+
+static struct atmel_lcdfb_config at91sam9g45_config = {
+ .have_alt_pixclock = true,
+};
+
+static struct atmel_lcdfb_config at91sam9g45es_config = {
+};
+
+static struct atmel_lcdfb_config at91sam9rl_config = {
+ .have_intensity_bit = true,
+};
+
+static struct atmel_lcdfb_config at32ap_config = {
+ .have_hozval = true,
+};
+
+static const struct platform_device_id atmel_lcdfb_devtypes[] = {
+ {
+ .name = "at91sam9261-lcdfb",
+ .driver_data = (unsigned long)&at91sam9261_config,
+ }, {
+ .name = "at91sam9263-lcdfb",
+ .driver_data = (unsigned long)&at91sam9263_config,
+ }, {
+ .name = "at91sam9g10-lcdfb",
+ .driver_data = (unsigned long)&at91sam9g10_config,
+ }, {
+ .name = "at91sam9g45-lcdfb",
+ .driver_data = (unsigned long)&at91sam9g45_config,
+ }, {
+ .name = "at91sam9g45es-lcdfb",
+ .driver_data = (unsigned long)&at91sam9g45es_config,
+ }, {
+ .name = "at91sam9rl-lcdfb",
+ .driver_data = (unsigned long)&at91sam9rl_config,
+ }, {
+ .name = "at32ap-lcdfb",
+ .driver_data = (unsigned long)&at32ap_config,
+ }, {
+ /* terminator */
+ }
+};
+
+static struct atmel_lcdfb_config *
+atmel_lcdfb_get_config(struct platform_device *pdev)
+{
+ unsigned long data;
+
+ data = platform_get_device_id(pdev)->driver_data;
+
+ return (struct atmel_lcdfb_config *)data;
+}
+
#if defined(CONFIG_ARCH_AT91)
#define ATMEL_LCDFB_FBINFO_DEFAULT (FBINFO_DEFAULT \
| FBINFO_PARTIAL_PAN_OK \
@@ -199,8 +270,7 @@ static unsigned long compute_hozval(struct atmel_lcdfb_info *sinfo,
unsigned long lcdcon2;
unsigned long value;
- if (!(cpu_is_at91sam9261() || cpu_is_at91sam9g10()
- || cpu_is_at32ap7000()))
+ if (!sinfo->config->have_hozval)
return xres;
lcdcon2 = lcdc_readl(sinfo, ATMEL_LCDC_LCDCON2);
@@ -426,7 +496,7 @@ static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
break;
case 16:
/* Older SOCs use IBGR:555 rather than BGR:565. */
- if (sinfo->have_intensity_bit)
+ if (sinfo->config->have_intensity_bit)
var->green.length = 5;
else
var->green.length = 6;
@@ -534,7 +604,7 @@ static int atmel_lcdfb_set_par(struct fb_info *info)
/* Now, the LCDC core... */
/* Set pixel clock */
- if (cpu_is_at91sam9g45() && !cpu_is_at91sam9g45es())
+ if (sinfo->config->have_alt_pixclock)
pix_factor = 1;
clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
@@ -685,7 +755,7 @@ static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red,
case FB_VISUAL_PSEUDOCOLOR:
if (regno < 256) {
- if (sinfo->have_intensity_bit) {
+ if (sinfo->config->have_intensity_bit) {
/* old style I+BGR:555 */
val = ((red >> 11) & 0x001f);
val |= ((green >> 6) & 0x03e0);
@@ -873,10 +943,9 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
}
sinfo->info = info;
sinfo->pdev = pdev;
- if (cpu_is_at91sam9261() || cpu_is_at91sam9263() ||
- cpu_is_at91sam9rl()) {
- sinfo->have_intensity_bit = true;
- }
+ sinfo->config = atmel_lcdfb_get_config(pdev);
+ if (!sinfo->config)
+ goto free_info;
strcpy(info->fix.id, sinfo->pdev->name);
info->flags = ATMEL_LCDFB_FBINFO_DEFAULT;
@@ -1145,7 +1214,7 @@ static struct platform_driver atmel_lcdfb_driver = {
.remove = __exit_p(atmel_lcdfb_remove),
.suspend = atmel_lcdfb_suspend,
.resume = atmel_lcdfb_resume,
-
+ .id_table = atmel_lcdfb_devtypes,
.driver = {
.name = "atmel_lcdfb",
.owner = THIS_MODULE,
@@ -31,6 +31,7 @@
#define ATMEL_LCDC_WIRING_BGR 0
#define ATMEL_LCDC_WIRING_RGB 1
+struct atmel_lcdfb_config;
/* LCD Controller info data structure, stored in device platform_data */
struct atmel_lcdfb_info {
@@ -61,7 +62,8 @@ struct atmel_lcdfb_info {
void (*atmel_lcdfb_power_control)(int on);
struct fb_monspecs *default_monspecs;
u32 pseudo_palette[16];
- bool have_intensity_bit;
+
+ struct atmel_lcdfb_config *config;
};
#define ATMEL_LCDC_DMABADDR1 0x00
Add platform device-id table in order to identify the controller and determine its configuration. The currently used configuration parameters are: have_alt_pixclock - SOC uses an alternate pixel-clock calculation formula (at91sam9g45 non-ES) have_hozval - SOC has a HOZVAL field in LCDFRMCFG which is used to determine the linesize for STN displays (at91sam9261, at921sam9g10 and at32ap) have_intensity_bit - SOC uses IBGR:555 rather than BGR:565 16-bit pixel layout (at91sam9261, at91sam9263 and at91sam9rl) This allows us to remove all the remaining uses of cpu_is macros from the driver. Tested on at91sam9263 and at91sam9g45, compile-tested for other AT91-SOCs, and untested for AVR32. Signed-off-by: Johan Hovold <jhovold@gmail.com> --- arch/arm/mach-at91/at91sam9261.c | 3 +- arch/arm/mach-at91/at91sam9261_devices.c | 6 ++- arch/arm/mach-at91/at91sam9263.c | 2 +- arch/arm/mach-at91/at91sam9263_devices.c | 2 +- arch/arm/mach-at91/at91sam9g45.c | 3 +- arch/arm/mach-at91/at91sam9g45_devices.c | 6 ++- arch/arm/mach-at91/at91sam9rl.c | 2 +- arch/arm/mach-at91/at91sam9rl_devices.c | 2 +- arch/avr32/mach-at32ap/at32ap700x.c | 2 + drivers/video/atmel_lcdfb.c | 89 ++++++++++++++++++++++++++++---- include/video/atmel_lcdc.h | 4 +- 11 files changed, 102 insertions(+), 19 deletions(-)