new file mode 100644
@@ -0,0 +1,44 @@
+Device Tree Clock bindings for arch-sunxi
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+ "allwinner,sunxi-osc-clk" - for a gatable oscillator
+ "allwinner,sunxi-pll1-clk" - for the main PLL clock
+ "allwinner,sunxi-cpu-clk" - for the CPU multiplexer clock
+ "allwinner,sunxi-axi-clk" - for the sunxi AXI clock
+ "allwinner,sunxi-ahb-clk" - for the sunxi AHB clock
+ "allwinner,sunxi-apb0-clk" - for the sunxi APB0 clock
+ "allwinner,sunxi-apb1-clk" - for the sunxi APB1 clock
+ "allwinner,sunxi-apb1-mux-clk" - for the sunxi APB1 clock muxing
+
+Required properties for all clocks:
+- reg : shall be the control register address for the clock.
+- clocks : shall be the input parent clock(s) phandle for the clock
+- #clock-cells : from common clock binding; shall be set to 0.
+
+For example:
+
+osc24M: osc24M@01c20050 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sunxi-osc-clk";
+ reg = <0x01c20050 0x4>;
+ clocks = <&osc24M_fixed>;
+};
+
+pll1: pll1@01c20000 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sunxi-pll1-clk";
+ reg = <0x01c20000 0x4>;
+ clocks = <&osc24M>;
+};
+
+cpu: cpu@01c20054 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sunxi-cpu-clk";
+ reg = <0x01c20054 0x4>;
+ clocks = <&osc32k>, <&osc24M>, <&pll1>;
+};
@@ -23,6 +23,7 @@ ifeq ($(CONFIG_COMMON_CLK), y)
obj-$(CONFIG_ARCH_MMP) += mmp/
endif
obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1x.o
+obj-$(CONFIG_ARCH_SUNXI) += sunxi/
obj-$(CONFIG_ARCH_U8500) += ux500/
obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o
obj-$(CONFIG_ARCH_ZYNQ) += clk-zynq.o
new file mode 100644
@@ -0,0 +1,5 @@
+#
+# Makefile for sunxi specific clk
+#
+
+obj-y += clk-sunxi.o clk-factors.o
new file mode 100644
@@ -0,0 +1,180 @@
+/*
+ * Copyright (C) 2013 Emilio López <emilio@elopez.com.ar>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Adjustable factor-based clock implementation
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/string.h>
+
+#include <linux/delay.h>
+
+#include "clk-factors.h"
+
+/*
+ * DOC: basic adjustable factor-based clock that cannot gate
+ *
+ * Traits of this clock:
+ * prepare - clk_prepare only ensures that parents are prepared
+ * enable - clk_enable only ensures that parents are enabled
+ * rate - rate is adjustable.
+ * clk->rate = (parent->rate * N * (K + 1) >> P) / (M + 1)
+ * parent - fixed parent. No clk_set_parent support
+ */
+
+struct clk_factors {
+ struct clk_hw hw;
+ void __iomem *reg;
+ struct clk_factors_config *config;
+ void (*get_factors) (u32 *rate, u32 parent, u8 *n, u8 *k, u8 *m, u8 *p);
+ spinlock_t *lock;
+};
+
+#define to_clk_factors(_hw) container_of(_hw, struct clk_factors, hw)
+
+#define SETMASK(len, pos) (((-1U) >> (31-len)) << (pos))
+#define CLRMASK(len, pos) (~(SETMASK(len, pos)))
+#define FACTOR_GET(bit, len, reg) (((reg) & SETMASK(len, bit)) >> (bit))
+
+#define FACTOR_SET(bit, len, reg, val) \
+ (((reg) & CLRMASK(len, bit)) | (val << (bit)))
+
+static unsigned long clk_factors_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ u8 n = 1, k = 0, p = 0, m = 0;
+ u32 reg;
+ unsigned long rate;
+ struct clk_factors *factors = to_clk_factors(hw);
+ struct clk_factors_config *config = factors->config;
+
+ /* Fetch the register value */
+ reg = readl(factors->reg);
+
+ /* Get each individual factor if applicable */
+ if (config->nwidth != SUNXI_FACTORS_NOT_APPLICABLE)
+ n = FACTOR_GET(config->nshift, config->nwidth, reg);
+ if (config->kwidth != SUNXI_FACTORS_NOT_APPLICABLE)
+ k = FACTOR_GET(config->kshift, config->kwidth, reg);
+ if (config->mwidth != SUNXI_FACTORS_NOT_APPLICABLE)
+ m = FACTOR_GET(config->mshift, config->mwidth, reg);
+ if (config->pwidth != SUNXI_FACTORS_NOT_APPLICABLE)
+ p = FACTOR_GET(config->pshift, config->pwidth, reg);
+
+ /* Calculate the rate */
+ rate = (parent_rate * n * (k + 1) >> p) / (m + 1);
+
+ return rate;
+}
+
+static long clk_factors_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ struct clk_factors *factors = to_clk_factors(hw);
+ factors->get_factors((u32 *)&rate, (u32)*parent_rate,
+ NULL, NULL, NULL, NULL);
+
+ return rate;
+}
+
+static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ u8 n, k, m, p;
+ u32 reg;
+ struct clk_factors *factors = to_clk_factors(hw);
+ struct clk_factors_config *config = factors->config;
+ unsigned long flags = 0;
+
+ factors->get_factors((u32 *)&rate, (u32)parent_rate, &n, &k, &m, &p);
+
+ if (factors->lock)
+ spin_lock_irqsave(factors->lock, flags);
+
+ /* Fetch the register value */
+ reg = readl(factors->reg);
+
+ /* Set up the new factors - macros do not do anything if width is 0 */
+ reg = FACTOR_SET(config->nshift, config->nwidth, reg, n);
+ reg = FACTOR_SET(config->kshift, config->kwidth, reg, k);
+ reg = FACTOR_SET(config->mshift, config->mwidth, reg, m);
+ reg = FACTOR_SET(config->pshift, config->pwidth, reg, p);
+
+ /* Apply them now */
+ writel(reg, factors->reg);
+
+ /* delay 500us so pll stabilizes */
+ __delay((rate >> 20) * 500 / 2);
+
+ if (factors->lock)
+ spin_unlock_irqrestore(factors->lock, flags);
+
+ return 0;
+}
+
+static const struct clk_ops clk_factors_ops = {
+ .recalc_rate = clk_factors_recalc_rate,
+ .round_rate = clk_factors_round_rate,
+ .set_rate = clk_factors_set_rate,
+};
+
+/**
+ * clk_register_factors - register a factors clock with
+ * the clock framework
+ * @dev: device registering this clock
+ * @name: name of this clock
+ * @parent_name: name of clock's parent
+ * @flags: framework-specific flags
+ * @reg: register address to adjust factors
+ * @config: shift and width of factors n, k, m and p
+ * @get_factors: function to calculate the factors for a given frequency
+ * @lock: shared register lock for this clock
+ */
+struct clk *clk_register_factors(struct device *dev, const char *name,
+ const char *parent_name,
+ unsigned long flags, void __iomem *reg,
+ struct clk_factors_config *config,
+ void (*get_factors)(u32 *rate, u32 parent,
+ u8 *n, u8 *k, u8 *m, u8 *p),
+ spinlock_t *lock)
+{
+ struct clk_factors *factors;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ /* allocate the factors */
+ factors = kzalloc(sizeof(struct clk_factors), GFP_KERNEL);
+ if (!factors) {
+ pr_err("%s: could not allocate factors clk\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ init.name = name;
+ init.ops = &clk_factors_ops;
+ init.flags = flags;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+
+ /* struct clk_factors assignments */
+ factors->reg = reg;
+ factors->config = config;
+ factors->lock = lock;
+ factors->hw.init = &init;
+ factors->get_factors = get_factors;
+
+ /* register the clock */
+ clk = clk_register(dev, &factors->hw);
+
+ if (IS_ERR(clk))
+ kfree(factors);
+
+ return clk;
+}
new file mode 100644
@@ -0,0 +1,27 @@
+#ifndef __MACH_SUNXI_CLK_FACTORS_H
+#define __MACH_SUNXI_CLK_FACTORS_H
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+
+#define SUNXI_FACTORS_NOT_APPLICABLE (0)
+
+struct clk_factors_config {
+ u8 nshift;
+ u8 nwidth;
+ u8 kshift;
+ u8 kwidth;
+ u8 mshift;
+ u8 mwidth;
+ u8 pshift;
+ u8 pwidth;
+};
+
+struct clk *clk_register_factors(struct device *dev, const char *name,
+ const char *parent_name,
+ unsigned long flags, void __iomem *reg,
+ struct clk_factors_config *config,
+ void (*get_factors) (u32 *rate, u32 parent_rate,
+ u8 *n, u8 *k, u8 *m, u8 *p),
+ spinlock_t *lock);
+#endif
new file mode 100644
@@ -0,0 +1,362 @@
+/*
+ * Copyright 2013 Emilio López
+ *
+ * Emilio López <emilio@elopez.com.ar>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/sunxi.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include "clk-factors.h"
+
+static DEFINE_SPINLOCK(clk_lock);
+
+/**
+ * sunxi_osc_clk_setup() - Setup function for gatable oscillator
+ */
+
+#define SUNXI_OSC24M_GATE 0
+
+static void __init sunxi_osc_clk_setup(struct device_node *node)
+{
+ struct clk *clk;
+ const char *clk_name = node->name;
+ const char *parent;
+ void *reg;
+
+ reg = of_iomap(node, 0);
+
+ parent = of_clk_get_parent_name(node, 0);
+
+ clk = clk_register_gate(NULL, clk_name, parent, CLK_IGNORE_UNUSED,
+ reg, SUNXI_OSC24M_GATE, 0, &clk_lock);
+
+ if (clk) {
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+ clk_register_clkdev(clk, clk_name, NULL);
+ }
+}
+
+
+
+/**
+ * sunxi_get_pll1_factors() - calculates n, k, m, p factors for PLL1
+ * PLL1 rate is calculated as follows
+ * rate = (parent_rate * n * (k + 1) >> p) / (m + 1);
+ * parent_rate is always 24Mhz
+ */
+
+static void sunxi_get_pll1_factors(u32 *freq, u32 parent_rate,
+ u8 *n, u8 *k, u8 *m, u8 *p)
+{
+ u8 div;
+
+ /* Normalize value to a 6M multiple */
+ div = *freq / 6000000;
+ *freq = 6000000 * div;
+
+ /* we were called to round the frequency, we can now return */
+ if (n == NULL)
+ return;
+
+ /* m is always zero for pll1 */
+ *m = 0;
+
+ /* k is 1 only on these cases */
+ if (*freq >= 768000000 || *freq == 42000000 || *freq == 54000000)
+ *k = 1;
+ else
+ *k = 0;
+
+ /* p will be 3 for divs under 10 */
+ if (div < 10)
+ *p = 3;
+
+ /* p will be 2 for divs between 10 - 20 and odd divs under 32 */
+ else if (div < 20 || (div < 32 && (div & 1)))
+ *p = 2;
+
+ /* p will be 1 for even divs under 32, divs under 40 and odd pairs
+ * of divs between 40-62 */
+ else if (div < 40 || (div < 64 && (div & 2)))
+ *p = 1;
+
+ /* any other entries have p = 0 */
+ else
+ *p = 0;
+
+ /* calculate a suitable n based on k and p */
+ div <<= *p;
+ div /= (*k + 1);
+ *n = div / 4;
+}
+
+
+
+/**
+ * sunxi_get_apb1_factors() - calculates m, p factors for APB1
+ * APB1 rate is calculated as follows
+ * rate = (parent_rate >> p) / (m + 1);
+ */
+
+static void sunxi_get_apb1_factors(u32 *freq, u32 parent_rate,
+ u8 *n, u8 *k, u8 *m, u8 *p)
+{
+ u8 calcm, calcp;
+
+ if (parent_rate < *freq)
+ *freq = parent_rate;
+
+ parent_rate = (parent_rate + (*freq - 1)) / *freq;
+
+ /* Invalid rate! */
+ if (parent_rate > 32)
+ return;
+
+ if (parent_rate <= 4)
+ calcp = 0;
+ else if (parent_rate <= 8)
+ calcp = 1;
+ else if (parent_rate <= 16)
+ calcp = 2;
+ else
+ calcp = 3;
+
+ calcm = (parent_rate >> calcp) - 1;
+
+ *freq = (parent_rate >> calcp) / (calcm + 1);
+
+ /* we were called to round the frequency, we can now return */
+ if (n == NULL)
+ return;
+
+ *m = calcm;
+ *p = calcp;
+}
+
+
+
+/**
+ * sunxi_factors_clk_setup() - Setup function for factor clocks
+ */
+
+struct factors_data {
+ struct clk_factors_config *table;
+ void (*getter) (u32 *rate, u32 parent_rate, u8 *n, u8 *k, u8 *m, u8 *p);
+};
+
+static struct clk_factors_config pll1_config = {
+ .nshift = 8,
+ .nwidth = 5,
+ .kshift = 4,
+ .kwidth = 2,
+ .mshift = 0,
+ .mwidth = 2,
+ .pshift = 16,
+ .pwidth = 2,
+};
+
+static struct clk_factors_config apb1_config = {
+ .mshift = 0,
+ .mwidth = 5,
+ .pshift = 16,
+ .pwidth = 2,
+};
+
+static const __initconst struct factors_data pll1_data = {
+ .table = &pll1_config,
+ .getter = sunxi_get_pll1_factors,
+};
+
+static const __initconst struct factors_data apb1_data = {
+ .table = &apb1_config,
+ .getter = sunxi_get_apb1_factors,
+};
+
+static void __init sunxi_factors_clk_setup(struct device_node *node,
+ struct factors_data *data)
+{
+ struct clk *clk;
+ const char *clk_name = node->name;
+ const char *parent;
+ void *reg;
+
+ reg = of_iomap(node, 0);
+
+ parent = of_clk_get_parent_name(node, 0);
+
+ clk = clk_register_factors(NULL, clk_name, parent, CLK_IGNORE_UNUSED,
+ reg, data->table, data->getter, &clk_lock);
+
+ if (clk) {
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+ clk_register_clkdev(clk, clk_name, NULL);
+ }
+}
+
+
+
+/**
+ * sunxi_mux_clk_setup() - Setup function for muxes
+ */
+
+#define SUNXI_MUX_GATE_WIDTH 2
+
+struct mux_data {
+ u8 shift;
+};
+
+static const __initconst struct mux_data cpu_data = {
+ .shift = 16,
+};
+
+static const __initconst struct mux_data apb1_mux_data = {
+ .shift = 24,
+};
+
+static void __init sunxi_mux_clk_setup(struct device_node *node,
+ struct mux_data *data)
+{
+ struct clk *clk;
+ const char *clk_name = node->name;
+ const char **parents = kmalloc(sizeof(char *) * 5, GFP_KERNEL);
+ void *reg;
+ int i = 0;
+
+ reg = of_iomap(node, 0);
+
+ while (i < 5 && (parents[i] = of_clk_get_parent_name(node, i)) != NULL)
+ i++;
+
+ clk = clk_register_mux(NULL, clk_name, parents, i, 0, reg,
+ data->shift, SUNXI_MUX_GATE_WIDTH,
+ 0, &clk_lock);
+
+ if (clk) {
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+ clk_register_clkdev(clk, clk_name, NULL);
+ }
+}
+
+
+
+/**
+ * sunxi_divider_clk_setup() - Setup function for simple divider clocks
+ */
+
+#define SUNXI_DIVISOR_WIDTH 2
+
+struct div_data {
+ u8 shift;
+ u8 pow;
+};
+
+static const __initconst struct div_data axi_data = {
+ .shift = 0,
+ .pow = 0,
+};
+
+static const __initconst struct div_data ahb_data = {
+ .shift = 4,
+ .pow = 1,
+};
+
+static const __initconst struct div_data apb0_data = {
+ .shift = 8,
+ .pow = 1,
+};
+
+static void __init sunxi_divider_clk_setup(struct device_node *node,
+ struct div_data *data)
+{
+ struct clk *clk;
+ const char *clk_name = node->name;
+ const char *clk_parent;
+ void *reg;
+
+ reg = of_iomap(node, 0);
+
+ clk_parent = of_clk_get_parent_name(node, 0);
+
+ clk = clk_register_divider(NULL, clk_name, clk_parent, 0,
+ reg, data->shift, SUNXI_DIVISOR_WIDTH,
+ data->pow ? CLK_DIVIDER_POWER_OF_TWO : 0,
+ &clk_lock);
+ if (clk) {
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+ clk_register_clkdev(clk, clk_name, NULL);
+ }
+}
+
+
+/* Matches for of_clk_init */
+static const __initconst struct of_device_id clk_match[] = {
+ {.compatible = "fixed-clock", .data = of_fixed_clk_setup,},
+ {.compatible = "allwinner,sunxi-osc-clk", .data = sunxi_osc_clk_setup,},
+ {}
+};
+
+/* Matches for factors clocks */
+static const __initconst struct of_device_id clk_factors_match[] = {
+ {.compatible = "allwinner,sunxi-pll1-clk", .data = &pll1_data,},
+ {.compatible = "allwinner,sunxi-apb1-clk", .data = &apb1_data,},
+ {}
+};
+
+/* Matches for divider clocks */
+static const __initconst struct of_device_id clk_div_match[] = {
+ {.compatible = "allwinner,sunxi-axi-clk", .data = &axi_data,},
+ {.compatible = "allwinner,sunxi-ahb-clk", .data = &ahb_data,},
+ {.compatible = "allwinner,sunxi-apb0-clk", .data = &apb0_data,},
+ {}
+};
+
+/* Matches for mux clocks */
+static const __initconst struct of_device_id clk_mux_match[] = {
+ {.compatible = "allwinner,sunxi-cpu-clk", .data = &cpu_data,},
+ {.compatible = "allwinner,sunxi-apb1-mux-clk", .data = &apb1_mux_data,},
+ {}
+};
+
+static void __init of_sunxi_table_clock_setup(const struct of_device_id *clk_match,
+ void *function)
+{
+ struct device_node *np;
+ const struct div_data *data;
+ const struct of_device_id *match;
+ void (*setup_function)(struct device_node *, const void *) = function;
+
+ for_each_matching_node(np, clk_match) {
+ match = of_match_node(clk_match, np);
+ data = match->data;
+ setup_function(np, data);
+ }
+}
+
+void __init sunxi_init_clocks(void)
+{
+ /* Register all the simple sunxi clocks on DT */
+ of_clk_init(clk_match);
+
+ /* Register factor clocks */
+ of_sunxi_table_clock_setup(clk_factors_match, sunxi_factors_clk_setup);
+
+ /* Register divider clocks */
+ of_sunxi_table_clock_setup(clk_div_match, sunxi_divider_clk_setup);
+
+ /* Register mux clocks */
+ of_sunxi_table_clock_setup(clk_mux_match, sunxi_mux_clk_setup);
+}
@@ -23,7 +23,7 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/sunxi_timer.h>
-#include <linux/clk-provider.h>
+#include <linux/clk/sunxi.h>
#define TIMER_CTL_REG 0x00
#define TIMER_CTL_ENABLE (1 << 0)
@@ -123,7 +123,7 @@ void __init sunxi_timer_init(void)
if (irq <= 0)
panic("Can't parse IRQ");
- of_clk_init(NULL);
+ sunxi_init_clocks();
clk = of_clk_get(node, 0);
if (IS_ERR(clk))
new file mode 100644
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_CLK_SUNXI_H_
+#define __LINUX_CLK_SUNXI_H_
+
+void __init sunxi_init_clocks(void);
+
+#endif
This commit implements the base CPU clocks for sunxi devices. It has been tested using a slightly modified cpufreq driver from the linux-sunxi 3.0 tree. Additionally, document the new bindings introduced by this patch. Idling: / # cat /sys/kernel/debug/clk/clk_summary clock enable_cnt prepare_cnt rate --------------------------------------------------------------------- osc32k 0 0 32768 osc24M_fixed 0 0 24000000 osc24M 0 0 24000000 apb1_mux 0 0 24000000 apb1 0 0 24000000 pll1 0 0 60000000 cpu 0 0 60000000 axi 0 0 60000000 ahb 0 0 60000000 apb0 0 0 30000000 dummy 0 0 0 After "yes >/dev/null &": / # cat /sys/kernel/debug/clk/clk_summary clock enable_cnt prepare_cnt rate --------------------------------------------------------------------- osc32k 0 0 32768 osc24M_fixed 0 0 24000000 osc24M 0 0 24000000 apb1_mux 0 0 24000000 apb1 0 0 24000000 pll1 0 0 1008000000 cpu 0 0 1008000000 axi 0 0 336000000 ahb 0 0 168000000 apb0 0 0 84000000 dummy 0 0 0 Signed-off-by: Emilio López <emilio@elopez.com.ar> --- Documentation/devicetree/bindings/clock/sunxi.txt | 44 +++ drivers/clk/Makefile | 1 + drivers/clk/sunxi/Makefile | 5 + drivers/clk/sunxi/clk-factors.c | 180 +++++++++++ drivers/clk/sunxi/clk-factors.h | 27 ++ drivers/clk/sunxi/clk-sunxi.c | 362 ++++++++++++++++++++++ drivers/clocksource/sunxi_timer.c | 4 +- include/linux/clk/sunxi.h | 22 ++ 8 files changed, 643 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/sunxi.txt create mode 100644 drivers/clk/sunxi/Makefile create mode 100644 drivers/clk/sunxi/clk-factors.c create mode 100644 drivers/clk/sunxi/clk-factors.h create mode 100644 drivers/clk/sunxi/clk-sunxi.c create mode 100644 include/linux/clk/sunxi.h