@@ -18,6 +18,19 @@
model = "KZM-A9-GT";
compatible = "renesas,kzm9g-reference", "renesas,sh73a0";
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vdd_dvfs>;
+ operating-points = <
+ /* kHz uV */
+ 1196000 1315000
+ 598000 1175000
+ 398667 1065000
+ >;
+ voltage-tolerance = <1>; /* 1% */
+ };
+ };
+
chosen {
bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200";
};
@@ -113,10 +126,10 @@
reg = <0x40>;
regulators {
- sd1 {
+ vdd_dvfs: sd1 {
regulator-name = "1.315V CPU";
- regulator-min-microvolt = <1315000>;
- regulator-max-microvolt = <1335000>;
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
};
@@ -134,6 +134,8 @@ config MACH_KZM9G
config MACH_KZM9G_REFERENCE
bool "KZM-A9-GT board - Reference Device Tree Implementation"
depends on ARCH_SH73A0
+ select ARCH_HAS_CPUFREQ
+ select ARCH_HAS_OPP
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SND_SOC_AK4642 if SND_SIMPLE_CARD
This patch enables the use of the generic cpufreq-cpu0 driver on kzm9g. Providing a regulator and a list of OPPs in DT, combined with a clock, attached to the cpu0 device is everything, the cpufreq-cpu0 driver needs. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- v3: no change arch/arm/boot/dts/sh73a0-kzm9g-reference.dts | 19 ++++++++++++++++--- arch/arm/mach-shmobile/Kconfig | 2 ++ 2 files changed, 18 insertions(+), 3 deletions(-)