| Message ID | 1362516795-6346-7-git-send-email-mporter@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi, On Wed, Mar 06, 2013 at 02:23:12, Porter, Matt wrote: > Adds AM33XX EDMA support to the am33xx.dtsi as documented in > Documentation/devicetree/bindings/dma/ti-edma.txt > > Signed-off-by: Matt Porter <mporter@ti.com> > --- > arch/arm/boot/dts/am33xx.dtsi | 20 ++++++++++++++++++++ > 1 file changed, 20 insertions(+) > > diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi > index 0957645..aaf44122 100644 > --- a/arch/arm/boot/dts/am33xx.dtsi > +++ b/arch/arm/boot/dts/am33xx.dtsi > @@ -87,6 +87,26 @@ > reg = <0x48200000 0x1000>; > }; > > + edma: edma@49000000 { > + compatible = "ti,edma3"; > + ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2"; > + reg = <0x49000000 0x10000>, > + <0x44e10f90 0x10>; > + interrupt-parent = <&intc>; Is it really need of "interrupt-parent = <&intc>" here ? as this property is already with root node. I am taking reference of 3.9-rc1 Thanks, Anil > + interrupts = <12 13 14>; > + #dma-cells = <1>; > + dma-channels = <64>; > + ti,edma-regions = <4>; > + ti,edma-slots = <256>; > + ti,edma-queue-tc-map = <0 0 > + 1 1 > + 2 2>; > + ti,edma-queue-priority-map = <0 0 > + 1 1 > + 2 2>; > + ti,edma-default-queue = <0>; > + }; > + > gpio1: gpio@44e07000 { > compatible = "ti,omap4-gpio"; > ti,hwmods = "gpio1"; > -- > 1.7.9.5 > > _______________________________________________ > Davinci-linux-open-source mailing list > Davinci-linux-open-source@linux.davincidsp.com > http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source >
On Wed, Mar 06, 2013 at 04:19:58AM +0000, Kumar, Anil wrote: > Hi, > > On Wed, Mar 06, 2013 at 02:23:12, Porter, Matt wrote: > > Adds AM33XX EDMA support to the am33xx.dtsi as documented in > > Documentation/devicetree/bindings/dma/ti-edma.txt > > > > Signed-off-by: Matt Porter <mporter@ti.com> > > --- > > arch/arm/boot/dts/am33xx.dtsi | 20 ++++++++++++++++++++ > > 1 file changed, 20 insertions(+) > > > > diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi > > index 0957645..aaf44122 100644 > > --- a/arch/arm/boot/dts/am33xx.dtsi > > +++ b/arch/arm/boot/dts/am33xx.dtsi > > @@ -87,6 +87,26 @@ > > reg = <0x48200000 0x1000>; > > }; > > > > + edma: edma@49000000 { > > + compatible = "ti,edma3"; > > + ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2"; > > + reg = <0x49000000 0x10000>, > > + <0x44e10f90 0x10>; > > + interrupt-parent = <&intc>; > > Is it really need of "interrupt-parent = <&intc>" here ? > as this property is already with root node. > I am taking reference of 3.9-rc1 You're correct. It's inherited from the parent node so I'll drop it out. I also noted that the cpsw node has this wrong so I'll send a patch to address that separately. -Matt
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 0957645..aaf44122 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -87,6 +87,26 @@ reg = <0x48200000 0x1000>; }; + edma: edma@49000000 { + compatible = "ti,edma3"; + ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2"; + reg = <0x49000000 0x10000>, + <0x44e10f90 0x10>; + interrupt-parent = <&intc>; + interrupts = <12 13 14>; + #dma-cells = <1>; + dma-channels = <64>; + ti,edma-regions = <4>; + ti,edma-slots = <256>; + ti,edma-queue-tc-map = <0 0 + 1 1 + 2 2>; + ti,edma-queue-priority-map = <0 0 + 1 1 + 2 2>; + ti,edma-default-queue = <0>; + }; + gpio1: gpio@44e07000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio1";
Adds AM33XX EDMA support to the am33xx.dtsi as documented in Documentation/devicetree/bindings/dma/ti-edma.txt Signed-off-by: Matt Porter <mporter@ti.com> --- arch/arm/boot/dts/am33xx.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)