@@ -1494,7 +1494,7 @@ static int s3c2410_udc_vbus_session(struct usb_gadget *gadget, int is_active)
dprintk(DEBUG_NORMAL, "%s()\n", __func__);
- udc->vbus = (is_active != 0);
+ gadget->vbus_active = (is_active != 0);
s3c2410_udc_set_pullup(udc, is_active);
return 0;
}
@@ -1520,7 +1520,7 @@ static irqreturn_t s3c2410_udc_vbus_irq(int irq, void *_dev)
if (udc_info->vbus_pin_inverted)
value = !value;
- if (value != dev->vbus)
+ if (value != &dev->gadget.vbus)
s3c2410_udc_vbus_session(&dev->gadget, value);
return IRQ_HANDLED;
@@ -1887,7 +1887,7 @@ static int s3c2410_udc_probe(struct platform_device *pdev)
dev_dbg(dev, "got irq %i\n", irq);
} else {
- udc->vbus = 1;
+ udc->gadget.vbus = 1;
}
if (udc_info && !udc_info->udc_command &&
@@ -92,7 +92,6 @@ struct s3c2410_udc {
unsigned req_std : 1;
unsigned req_config : 1;
unsigned req_pending : 1;
- u8 vbus;
struct dentry *regs_info;
};
#define to_s3c2410(g) (container_of((g), struct s3c2410_udc, gadget))
Using common vbus_active to indicate vbus status CC: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Peter Chen <peter.chen@freescale.com> --- drivers/usb/gadget/s3c2410_udc.c | 6 +++--- drivers/usb/gadget/s3c2410_udc.h | 1 - 2 files changed, 3 insertions(+), 4 deletions(-)