@@ -8,6 +8,7 @@
* published by the Free Software Foundation.
*/
+#include <linux/err.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/errno.h>
@@ -27,12 +28,21 @@ static u8 async_cs, sync_cs;
static unsigned refclk_psec;
static struct gpmc_settings tusb_async = {
+ .wait_on_read = true,
+ .wait_on_write = true,
+ .device_width = GPMC_DEVWIDTH_16BIT,
.mux_add_data = GPMC_MUX_AD,
};
static struct gpmc_settings tusb_sync = {
+ .burst_read = true,
+ .burst_write = true,
.sync_read = true,
.sync_write = true,
+ .wait_on_read = true,
+ .wait_on_write = true,
+ .burst_len = GPMC_BURST_16,
+ .device_width = GPMC_DEVWIDTH_16BIT,
.mux_add_data = GPMC_MUX_AD,
};
@@ -168,18 +178,12 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
return status;
}
tusb_resources[0].end = tusb_resources[0].start + 0x9ff;
+ tusb_async.wait_pin = waitpin;
async_cs = async;
- gpmc_cs_write_reg(async, GPMC_CS_CONFIG1,
- GPMC_CONFIG1_PAGE_LEN(2)
- | GPMC_CONFIG1_WAIT_READ_MON
- | GPMC_CONFIG1_WAIT_WRITE_MON
- | GPMC_CONFIG1_WAIT_PIN_SEL(waitpin)
- | GPMC_CONFIG1_READTYPE_ASYNC
- | GPMC_CONFIG1_WRITETYPE_ASYNC
- | GPMC_CONFIG1_DEVICESIZE_16
- | GPMC_CONFIG1_DEVICETYPE_NOR
- | GPMC_CONFIG1_MUXADDDATA);
+ status = gpmc_cs_program_settings(async_cs, &tusb_async);
+ if (status < 0)
+ return status;
/* SYNC region, primarily for DMA */
status = gpmc_cs_request(sync, SZ_16M, (unsigned long *)
@@ -189,21 +193,12 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
return status;
}
tusb_resources[1].end = tusb_resources[1].start + 0x9ff;
+ tusb_sync.wait_pin = waitpin;
sync_cs = sync;
- gpmc_cs_write_reg(sync, GPMC_CS_CONFIG1,
- GPMC_CONFIG1_READMULTIPLE_SUPP
- | GPMC_CONFIG1_READTYPE_SYNC
- | GPMC_CONFIG1_WRITEMULTIPLE_SUPP
- | GPMC_CONFIG1_WRITETYPE_SYNC
- | GPMC_CONFIG1_PAGE_LEN(2)
- | GPMC_CONFIG1_WAIT_READ_MON
- | GPMC_CONFIG1_WAIT_WRITE_MON
- | GPMC_CONFIG1_WAIT_PIN_SEL(waitpin)
- | GPMC_CONFIG1_DEVICESIZE_16
- | GPMC_CONFIG1_DEVICETYPE_NOR
- | GPMC_CONFIG1_MUXADDDATA
- /* fclk divider gets set later */
- );
+
+ status = gpmc_cs_program_settings(sync_cs, &tusb_sync);
+ if (status < 0)
+ return status;
/* IRQ */
status = gpio_request_one(irq, GPIOF_IN, "TUSB6010 irq");
Convert the OMAP2+ TUSB code to use the gpmc_cs_program_settings() function for configuring the various GPMC options instead of directly programming the CONFIG1 register. Signed-off-by: Jon Hunter <jon-hunter@ti.com> --- arch/arm/mach-omap2/usb-tusb6010.c | 43 ++++++++++++++++-------------------- 1 file changed, 19 insertions(+), 24 deletions(-)