@@ -72,11 +72,11 @@ in this document, but drivers acting as clients to the GPIO interface must
not care how it's implemented.)
That said, if the convention is supported on their platform, drivers should
-use it when possible. Platforms must declare GENERIC_GPIO support in their
-Kconfig (boolean true), and provide an <asm/gpio.h> file. Drivers that can't
-work without standard GPIO calls should have Kconfig entries which depend
-on GENERIC_GPIO. The GPIO calls are available, either as "real code" or as
-optimized-away stubs, when drivers use the include file:
+use it when possible. Platforms must select ARCH_REQUIRE_GPIOLIB or
+ARCH_WANT_OPTIONAL_GPIOLIB in their Kconfig. Drivers that can't work without
+standard GPIO calls should have Kconfig entries which depend on GPIOLIB. The
+GPIO calls are available, either as "real code" or as optimized-away stubs,
+when drivers use the include file:
#include <linux/gpio.h>
@@ -56,9 +56,6 @@ config GENERIC_CALIBRATE_DELAY
bool
default y
-config GENERIC_GPIO
- bool
-
config ZONE_DMA
bool
default y
@@ -107,9 +107,6 @@ config MIGHT_HAVE_PCI
config SYS_SUPPORTS_APM_EMULATION
bool
-config GENERIC_GPIO
- bool
-
config HAVE_TCM
bool
select GENERIC_ALLOCATOR
@@ -150,7 +150,7 @@ err_out:
}
/*
- * GENERIC_GPIO primitives.
+ * GPIO primitives.
*/
static int orion_gpio_request(struct gpio_chip *chip, unsigned pin)
{
@@ -92,9 +92,6 @@ config SWIOTLB
config IOMMU_HELPER
def_bool SWIOTLB
-config GENERIC_GPIO
- bool
-
source "init/Kconfig"
source "kernel/Kconfig.freezer"
@@ -26,9 +26,6 @@ config AVR32
There is an AVR32 Linux project with a web page at
http://avr32linux.org/.
-config GENERIC_GPIO
- def_bool n
-
config STACKTRACE_SUPPORT
def_bool y
@@ -55,9 +55,6 @@ config GENERIC_BUG
config ZONE_DMA
def_bool y
-config GENERIC_GPIO
- def_bool n
-
config FORCE_MAX_ZONEORDER
int
default "14"
@@ -170,9 +170,6 @@ source "mm/Kconfig"
source "kernel/Kconfig.hz"
-config GENERIC_GPIO
- def_bool n
-
endmenu
source "init/Kconfig"
@@ -101,9 +101,6 @@ config GENERIC_CALIBRATE_DELAY
config HAVE_SETUP_PER_CPU_AREA
def_bool y
-config GENERIC_GPIO
- bool
-
config DMI
bool
default y
@@ -35,9 +35,6 @@ config ARCH_HAS_ILOG2_U32
config ARCH_HAS_ILOG2_U64
bool
-config GENERIC_GPIO
- bool
-
config GENERIC_HWEIGHT
bool
default y
@@ -54,9 +54,6 @@ config GENERIC_HWEIGHT
config GENERIC_CALIBRATE_DELAY
def_bool y
-config GENERIC_GPIO
- def_bool n
-
config NO_IOPORT
def_bool y
@@ -56,9 +56,6 @@ config GENERIC_HWEIGHT
config GENERIC_CALIBRATE_DELAY
def_bool y
-config GENERIC_GPIO
- bool
-
config GENERIC_CSUM
def_bool y
@@ -1004,9 +1004,6 @@ config GENERIC_ISA_DMA_SUPPORT_BROKEN
config ISA_DMA_API
bool
-config GENERIC_GPIO
- bool
-
config HOLES_IN_ZONE
bool
@@ -44,9 +44,6 @@ config GENERIC_HWEIGHT
config NO_IOPORT
def_bool y
-config GENERIC_GPIO
- def_bool n
-
config TRACE_IRQFLAGS_SUPPORT
def_bool y
@@ -82,11 +82,6 @@ config GENERIC_HWEIGHT
bool
default y
-config GENERIC_GPIO
- bool
- help
- Generic GPIO API support
-
config PPC
bool
default y
@@ -92,9 +92,6 @@ config GENERIC_CSUM
config GENERIC_HWEIGHT
def_bool y
-config GENERIC_GPIO
- def_bool n
-
config GENERIC_CALIBRATE_DELAY
bool
@@ -135,11 +135,6 @@ config GENERIC_ISA_DMA
bool
default y if SPARC32
-config GENERIC_GPIO
- bool
- help
- Generic GPIO API support
-
config ARCH_SUPPORTS_DEBUG_PAGEALLOC
def_bool y if SPARC64
@@ -23,9 +23,6 @@ config UNICORE32
designs licensed by PKUnity Ltd.
Please see web page at <http://www.pkunity.com/>.
-config GENERIC_GPIO
- bool
-
config GENERIC_CSUM
def_bool y
@@ -172,9 +172,6 @@ config GENERIC_BUG_RELATIVE_POINTERS
config GENERIC_HWEIGHT
def_bool y
-config GENERIC_GPIO
- bool
-
config ARCH_MAY_HAVE_PC_FDC
def_bool y
depends on ISA_DMA_API
@@ -33,9 +33,6 @@ config RWSEM_XCHGADD_ALGORITHM
config GENERIC_HWEIGHT
def_bool y
-config GENERIC_GPIO
- bool
-
config ARCH_HAS_ILOG2_U32
def_bool n
@@ -38,7 +38,6 @@ config GPIO_DEVRES
menuconfig GPIOLIB
bool "GPIO Support"
depends on ARCH_WANT_OPTIONAL_GPIOLIB || ARCH_REQUIRE_GPIOLIB
- select GENERIC_GPIO
help
This enables GPIO support through the generic GPIO library.
You only need to enable this, if you also want to enable
@@ -255,7 +255,7 @@ static int __get_gpo_state_p3(struct lpc32xx_gpio_chip *group,
}
/*
- * GENERIC_GPIO primitives.
+ * GPIO primitives.
*/
static int lpc32xx_gpio_dir_input_p012(struct gpio_chip *chip,
unsigned pin)
GENERIC_GPIO has been made equivalent to GPIOLIB in architecture code and all driver code has been switch to depend on GPIOLIB. It is thus safe to have GENERIC_GPIO removed. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> --- Documentation/gpio.txt | 10 +++++----- arch/alpha/Kconfig | 3 --- arch/arm/Kconfig | 3 --- arch/arm/plat-orion/gpio.c | 2 +- arch/arm64/Kconfig | 3 --- arch/avr32/Kconfig | 3 --- arch/blackfin/Kconfig | 3 --- arch/hexagon/Kconfig | 3 --- arch/ia64/Kconfig | 3 --- arch/m68k/Kconfig | 3 --- arch/metag/Kconfig | 3 --- arch/microblaze/Kconfig | 3 --- arch/mips/Kconfig | 3 --- arch/openrisc/Kconfig | 3 --- arch/powerpc/Kconfig | 5 ----- arch/sh/Kconfig | 3 --- arch/sparc/Kconfig | 5 ----- arch/unicore32/Kconfig | 3 --- arch/x86/Kconfig | 3 --- arch/xtensa/Kconfig | 3 --- drivers/gpio/Kconfig | 1 - drivers/gpio/gpio-lpc32xx.c | 2 +- 22 files changed, 7 insertions(+), 66 deletions(-)