diff mbox

pinctrl/abx500: fix ab8505 alternate function

Message ID 1364981014-423-1-git-send-email-linus.walleij@stericsson.com (mailing list archive)
State New, archived
Headers show

Commit Message

Linus Walleij April 3, 2013, 9:23 a.m. UTC 
From: Patrice Chotard <patrice.chotard@st.com>

This fix allows to correctly select default and
alternate pin mode.

By default for all ABx500 family chip, pin default
mode is selected by clearing corresponding bit in
GPIOSELx register except for pins which support
alternate function, in this case, corresponding bit
must be set.

But, due to an unlogical hardware implementation,
for one particular pin (GPIO11) reverse setting
must be done. For that, update the alternate function
array by declaring that this pin supports alternate
function.

Reported-by: Ramesh Chandrasekaran <ramesh.chandrasekaran@stericsson.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/pinctrl/pinctrl-ab8505.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox

Patch

diff --git a/drivers/pinctrl/pinctrl-ab8505.c b/drivers/pinctrl/pinctrl-ab8505.c
index 3a4238e..8ae076a 100644
--- a/drivers/pinctrl/pinctrl-ab8505.c
+++ b/drivers/pinctrl/pinctrl-ab8505.c
@@ -284,7 +284,7 @@  struct alternate_functions ab8505_alternate_functions[AB8505_GPIO_MAX_NUMBER + 1
 
 	ALTERNATE_FUNCTIONS(9, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO9, bit 0 reserved */
 	ALTERNATE_FUNCTIONS(10,      1,      0, UNUSED, 1, 0, 0), /* GPIO10, altA and altB controlled by bit 0 */
-	ALTERNATE_FUNCTIONS(11,      2, UNUSED, UNUSED, 0, 0, 0), /* GPIO11, altA controlled by bit 2 */
+	ALTERNATE_FUNCTIONS(11,      2,      1, UNUSED, 0, 0, 0), /* GPIO11, altA controlled by bit 2 */
 	ALTERNATE_FUNCTIONS(12, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO12, bit3 reseved */
 	ALTERNATE_FUNCTIONS(13,      4,      3,      4, 1, 0, 2), /* GPIO13, altA altB and altC controlled by bit 3 and 4 */
 	ALTERNATE_FUNCTIONS(14,      5, UNUSED, UNUSED, 0, 0, 0), /* GPIO14, altA controlled by bit 5 */