@@ -464,6 +464,17 @@
};
};
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "Power";
+ gpios = <&gpio 170 1>; /* gpio PV2, active low */
+ linux,code = <116>; /* KEY_POWER */
+ gpio-key,wakeup;
+ };
+ };
+
kbc {
status = "okay";
nvidia,debounce-delay-ms = <2>;
@@ -343,6 +343,17 @@
};
};
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "Power";
+ gpios = <&gpio 190 1>; /* gpio PX6, active low */
+ linux,code = <116>; /* KEY_POWER */
+ gpio-key,wakeup;
+ };
+ };
+
poweroff {
compatible = "gpio-poweroff";
gpios = <&gpio 191 1>; /* gpio PX7, active low */
@@ -544,6 +544,17 @@
};
};
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ power {
+ label = "Power";
+ gpios = <&gpio 170 1>; /* gpio PV2, active low */
+ linux,code = <116>; /* KEY_POWER */
+ gpio-key,wakeup;
+ };
+ };
+
regulators {
compatible = "simple-bus";
#address-cells = <1>;
This adds the power gpio key to DT and enable the wakeup of the gpio key for the device. The Seaboard and paz00 already had the power gpio key binding and the power key of Whistler was on KBC. So these boards' device tree didn't include in this patch. Signed-off-by: Joseph Lo <josephl@nvidia.com> --- V6: * no change V5: * no change V4: * no change V3: * no change V2: * no change --- arch/arm/boot/dts/tegra20-harmony.dts | 11 +++++++++++ arch/arm/boot/dts/tegra20-trimslice.dts | 11 +++++++++++ arch/arm/boot/dts/tegra20-ventana.dts | 11 +++++++++++ 3 files changed, 33 insertions(+)