@@ -11,7 +11,7 @@
#include <linux/platform_data/dma-ste-dma40.h>
#include <mach/devices.h>
-#include <mach/irqs.h>
+#include "irqs.h"
#include <linux/platform_data/asoc-ux500-msp.h>
#include "ste-dma40-db8500.h"
@@ -12,7 +12,7 @@
#include <linux/mfd/tc3589x.h>
#include <linux/input/matrix_keypad.h>
-#include <mach/irqs.h>
+#include "irqs.h"
#include "board-mop500.h"
@@ -43,7 +43,7 @@
#include <mach/setup.h>
#include <mach/devices.h>
-#include <mach/irqs.h>
+#include "irqs.h"
#include <linux/platform_data/crypto-ux500.h>
#include "ste-dma40-db8500.h"
@@ -8,7 +8,7 @@
#define __BOARD_MOP500_H
/* For NOMADIK_NR_GPIO */
-#include <mach/irqs.h>
+#include "irqs.h"
#include <linux/platform_data/asoc-ux500-msp.h>
#include <linux/amba/mmci.h>
@@ -30,7 +30,7 @@
#include <mach/setup.h>
#include <mach/devices.h>
-#include <mach/irqs.h>
+#include "irqs.h"
#include "devices-db8500.h"
#include "ste-dma40-db8500.h"
@@ -13,7 +13,7 @@
#include <linux/platform_device.h>
#include <linux/platform_data/pinctrl-nomadik.h>
-#include <mach/irqs.h>
+#include "irqs.h"
#include "devices-common.h"
@@ -16,7 +16,7 @@
#include <linux/mfd/dbx500-prcmu.h>
#include <mach/setup.h>
-#include <mach/irqs.h>
+#include "irqs.h"
#include "db8500-regs.h"
#include "devices-db8500.h"
@@ -9,7 +9,7 @@
#define __DEVICES_DB8500_H
#include <linux/platform_data/usb-musb-ux500.h>
-#include <mach/irqs.h>
+#include "irqs.h"
#include "db8500-regs.h"
#include "devices-common.h"
similarity index 100%
rename from arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
rename to arch/arm/mach-ux500/irqs-board-mop500.h
similarity index 100%
rename from arch/arm/mach-ux500/include/mach/irqs-db8500.h
rename to arch/arm/mach-ux500/irqs-db8500.h
similarity index 95%
rename from arch/arm/mach-ux500/include/mach/irqs.h
rename to arch/arm/mach-ux500/irqs.h
@@ -34,14 +34,14 @@
/* This will be overridden by SoC-specific irq headers */
#define IRQ_SOC_END IRQ_SOC_START
-#include <mach/irqs-db8500.h>
+#include "irqs-db8500.h"
#define IRQ_BOARD_START IRQ_SOC_END
/* This will be overridden by board-specific irq headers */
#define IRQ_BOARD_END IRQ_BOARD_START
#ifdef CONFIG_MACH_MOP500
-#include <mach/irqs-board-mop500.h>
+#include "irqs-board-mop500.h"
#endif
#define UX500_NR_IRQS IRQ_BOARD_END
@@ -14,7 +14,7 @@
#include <asm/smp_twd.h>
#include <mach/setup.h>
-#include <mach/irqs.h>
+#include "irqs.h"
#include "db8500-regs.h"
#include "id.h"