@@ -94,8 +94,6 @@ void __init u8500_map_io(void)
iotable_init(u9540_io_desc, ARRAY_SIZE(u9540_io_desc));
else
iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
-
- _PRCMU_BASE = __io_address(U8500_PRCMU_BASE);
}
static struct resource db8500_pmu_resources[] = {
@@ -30,8 +30,6 @@
#include "board-mop500.h"
#include "id.h"
-void __iomem *_PRCMU_BASE;
-
/*
* FIXME: Should we set up the GPIO domain here?
*
@@ -39,8 +39,6 @@
#ifndef __ASSEMBLY__
-extern void __iomem *_PRCMU_BASE;
-
#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
#endif /* __ASSEMBLY__ */
@@ -422,9 +422,10 @@ static DEFINE_SPINLOCK(clkout_lock);
/* Global var to runtime determine TCDM base for v2 or v1 */
static __iomem void *tcdm_base;
+static __iomem void *prcmu_base;
struct clk_mgt {
- void __iomem *reg;
+ u32 offset;
u32 pllsw;
int branch;
bool clk38div;
@@ -599,9 +600,9 @@ int db8500_prcmu_set_display_clocks(void)
while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
cpu_relax();
- writel(PRCMU_DSI_CLOCK_SETTING, PRCM_HDMICLK_MGT);
- writel(PRCMU_DSI_LP_CLOCK_SETTING, PRCM_TVCLK_MGT);
- writel(PRCMU_DPI_CLOCK_SETTING, PRCM_LCDCLK_MGT);
+ writel(PRCMU_DSI_CLOCK_SETTING, prcmu_base + PRCM_HDMICLK_MGT);
+ writel(PRCMU_DSI_LP_CLOCK_SETTING, prcmu_base + PRCM_TVCLK_MGT);
+ writel(PRCMU_DPI_CLOCK_SETTING, prcmu_base + PRCM_LCDCLK_MGT);
/* Release the HW semaphore. */
writel(0, PRCM_SEM);
@@ -613,7 +614,7 @@ int db8500_prcmu_set_display_clocks(void)
u32 db8500_prcmu_read(unsigned int reg)
{
- return readl(_PRCMU_BASE + reg);
+ return readl(prcmu_base + reg);
}
void db8500_prcmu_write(unsigned int reg, u32 value)
@@ -621,7 +622,7 @@ void db8500_prcmu_write(unsigned int reg, u32 value)
unsigned long flags;
spin_lock_irqsave(&prcmu_lock, flags);
- writel(value, (_PRCMU_BASE + reg));
+ writel(value, (prcmu_base + reg));
spin_unlock_irqrestore(&prcmu_lock, flags);
}
@@ -631,9 +632,9 @@ void db8500_prcmu_write_masked(unsigned int reg, u32 mask, u32 value)
unsigned long flags;
spin_lock_irqsave(&prcmu_lock, flags);
- val = readl(_PRCMU_BASE + reg);
+ val = readl(prcmu_base + reg);
val = ((val & ~mask) | (value & mask));
- writel(val, (_PRCMU_BASE + reg));
+ writel(val, (prcmu_base + reg));
spin_unlock_irqrestore(&prcmu_lock, flags);
}
@@ -1059,7 +1060,7 @@ int db8500_prcmu_set_ddr_opp(u8 opp)
/* Divide the frequency of certain clocks by 2 for APE_50_PARTLY_25_OPP. */
static void request_even_slower_clocks(bool enable)
{
- void __iomem *clock_reg[] = {
+ u32 clock_reg[] = {
PRCM_ACLK_MGT,
PRCM_DMACLK_MGT
};
@@ -1076,7 +1077,7 @@ static void request_even_slower_clocks(bool enable)
u32 val;
u32 div;
- val = readl(clock_reg[i]);
+ val = readl(prcmu_base + clock_reg[i]);
div = (val & PRCM_CLK_MGT_CLKPLLDIV_MASK);
if (enable) {
if ((div <= 1) || (div > 15)) {
@@ -1092,7 +1093,7 @@ static void request_even_slower_clocks(bool enable)
}
val = ((val & ~PRCM_CLK_MGT_CLKPLLDIV_MASK) |
(div & PRCM_CLK_MGT_CLKPLLDIV_MASK));
- writel(val, clock_reg[i]);
+ writel(val, prcmu_base + clock_reg[i]);
}
unlock_and_return:
@@ -1446,14 +1447,14 @@ static int request_clock(u8 clock, bool enable)
while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
cpu_relax();
- val = readl(clk_mgt[clock].reg);
+ val = readl(prcmu_base + clk_mgt[clock].offset);
if (enable) {
val |= (PRCM_CLK_MGT_CLKEN | clk_mgt[clock].pllsw);
} else {
clk_mgt[clock].pllsw = (val & PRCM_CLK_MGT_CLKPLLSW_MASK);
val &= ~(PRCM_CLK_MGT_CLKEN | PRCM_CLK_MGT_CLKPLLSW_MASK);
}
- writel(val, clk_mgt[clock].reg);
+ writel(val, prcmu_base + clk_mgt[clock].offset);
/* Release the HW semaphore. */
writel(0, PRCM_SEM);
@@ -1629,7 +1630,7 @@ static unsigned long clock_rate(u8 clock)
u32 pllsw;
unsigned long rate = ROOT_CLOCK_RATE;
- val = readl(clk_mgt[clock].reg);
+ val = readl(prcmu_base + clk_mgt[clock].offset);
if (val & PRCM_CLK_MGT_CLK38) {
if (clk_mgt[clock].clk38div && (val & PRCM_CLK_MGT_CLK38DIV))
@@ -1785,7 +1786,7 @@ static long round_clock_rate(u8 clock, unsigned long rate)
unsigned long src_rate;
long rounded_rate;
- val = readl(clk_mgt[clock].reg);
+ val = readl(prcmu_base + clk_mgt[clock].offset);
src_rate = clock_source_rate((val | clk_mgt[clock].pllsw),
clk_mgt[clock].branch);
div = clock_divider(src_rate, rate);
@@ -1933,7 +1934,7 @@ static void set_clock_rate(u8 clock, unsigned long rate)
while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
cpu_relax();
- val = readl(clk_mgt[clock].reg);
+ val = readl(prcmu_base + clk_mgt[clock].offset);
src_rate = clock_source_rate((val | clk_mgt[clock].pllsw),
clk_mgt[clock].branch);
div = clock_divider(src_rate, rate);
@@ -1961,7 +1962,7 @@ static void set_clock_rate(u8 clock, unsigned long rate)
val &= ~PRCM_CLK_MGT_CLKPLLDIV_MASK;
val |= min(div, (u32)31);
}
- writel(val, clk_mgt[clock].reg);
+ writel(val, prcmu_base + clk_mgt[clock].offset);
/* Release the HW semaphore. */
writel(0, PRCM_SEM);
@@ -3163,8 +3164,18 @@ static int db8500_prcmu_probe(struct platform_device *pdev)
int irq = 0, err = 0, i;
struct resource *res;
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "prcmu");
+ if (!res) {
+ dev_err(&pdev->dev, "no prcmu memory region provided\n");
+ return -ENOENT;
+ }
+ prcmu_base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+ if (!prcmu_base) {
+ dev_err(&pdev->dev,
+ "failed to ioremap prcmu register memory\n");
+ return -ENOENT;
+ }
init_prcm_registers();
-
dbx500_fw_version_init(pdev, pdata->version_offset);
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "prcmu-tcdm");
if (!res) {
@@ -13,136 +13,132 @@
#ifndef __DB8500_PRCMU_REGS_H
#define __DB8500_PRCMU_REGS_H
-#include <mach/hardware.h>
-
#define BITS(_start, _end) ((BIT(_end) - BIT(_start)) + BIT(_end))
-#define PRCM_CLK_MGT(_offset) (void __iomem *)(IO_ADDRESS(U8500_PRCMU_BASE) \
- + _offset)
-#define PRCM_ACLK_MGT PRCM_CLK_MGT(0x004)
-#define PRCM_SVACLK_MGT PRCM_CLK_MGT(0x008)
-#define PRCM_SIACLK_MGT PRCM_CLK_MGT(0x00C)
-#define PRCM_SGACLK_MGT PRCM_CLK_MGT(0x014)
-#define PRCM_UARTCLK_MGT PRCM_CLK_MGT(0x018)
-#define PRCM_MSP02CLK_MGT PRCM_CLK_MGT(0x01C)
-#define PRCM_I2CCLK_MGT PRCM_CLK_MGT(0x020)
-#define PRCM_SDMMCCLK_MGT PRCM_CLK_MGT(0x024)
-#define PRCM_SLIMCLK_MGT PRCM_CLK_MGT(0x028)
-#define PRCM_PER1CLK_MGT PRCM_CLK_MGT(0x02C)
-#define PRCM_PER2CLK_MGT PRCM_CLK_MGT(0x030)
-#define PRCM_PER3CLK_MGT PRCM_CLK_MGT(0x034)
-#define PRCM_PER5CLK_MGT PRCM_CLK_MGT(0x038)
-#define PRCM_PER6CLK_MGT PRCM_CLK_MGT(0x03C)
-#define PRCM_PER7CLK_MGT PRCM_CLK_MGT(0x040)
-#define PRCM_LCDCLK_MGT PRCM_CLK_MGT(0x044)
-#define PRCM_BMLCLK_MGT PRCM_CLK_MGT(0x04C)
-#define PRCM_HSITXCLK_MGT PRCM_CLK_MGT(0x050)
-#define PRCM_HSIRXCLK_MGT PRCM_CLK_MGT(0x054)
-#define PRCM_HDMICLK_MGT PRCM_CLK_MGT(0x058)
-#define PRCM_APEATCLK_MGT PRCM_CLK_MGT(0x05C)
-#define PRCM_APETRACECLK_MGT PRCM_CLK_MGT(0x060)
-#define PRCM_MCDECLK_MGT PRCM_CLK_MGT(0x064)
-#define PRCM_IPI2CCLK_MGT PRCM_CLK_MGT(0x068)
-#define PRCM_DSIALTCLK_MGT PRCM_CLK_MGT(0x06C)
-#define PRCM_DMACLK_MGT PRCM_CLK_MGT(0x074)
-#define PRCM_B2R2CLK_MGT PRCM_CLK_MGT(0x078)
-#define PRCM_TVCLK_MGT PRCM_CLK_MGT(0x07C)
-#define PRCM_UNIPROCLK_MGT PRCM_CLK_MGT(0x278)
-#define PRCM_SSPCLK_MGT PRCM_CLK_MGT(0x280)
-#define PRCM_RNGCLK_MGT PRCM_CLK_MGT(0x284)
-#define PRCM_UICCCLK_MGT PRCM_CLK_MGT(0x27C)
-#define PRCM_MSP1CLK_MGT PRCM_CLK_MGT(0x288)
-
-#define PRCM_ARM_PLLDIVPS (_PRCMU_BASE + 0x118)
+#define PRCM_ACLK_MGT (0x004)
+#define PRCM_SVACLK_MGT (0x008)
+#define PRCM_SIACLK_MGT (0x00C)
+#define PRCM_SGACLK_MGT (0x014)
+#define PRCM_UARTCLK_MGT (0x018)
+#define PRCM_MSP02CLK_MGT (0x01C)
+#define PRCM_I2CCLK_MGT (0x020)
+#define PRCM_SDMMCCLK_MGT (0x024)
+#define PRCM_SLIMCLK_MGT (0x028)
+#define PRCM_PER1CLK_MGT (0x02C)
+#define PRCM_PER2CLK_MGT (0x030)
+#define PRCM_PER3CLK_MGT (0x034)
+#define PRCM_PER5CLK_MGT (0x038)
+#define PRCM_PER6CLK_MGT (0x03C)
+#define PRCM_PER7CLK_MGT (0x040)
+#define PRCM_LCDCLK_MGT (0x044)
+#define PRCM_BMLCLK_MGT (0x04C)
+#define PRCM_HSITXCLK_MGT (0x050)
+#define PRCM_HSIRXCLK_MGT (0x054)
+#define PRCM_HDMICLK_MGT (0x058)
+#define PRCM_APEATCLK_MGT (0x05C)
+#define PRCM_APETRACECLK_MGT (0x060)
+#define PRCM_MCDECLK_MGT (0x064)
+#define PRCM_IPI2CCLK_MGT (0x068)
+#define PRCM_DSIALTCLK_MGT (0x06C)
+#define PRCM_DMACLK_MGT (0x074)
+#define PRCM_B2R2CLK_MGT (0x078)
+#define PRCM_TVCLK_MGT (0x07C)
+#define PRCM_UNIPROCLK_MGT (0x278)
+#define PRCM_SSPCLK_MGT (0x280)
+#define PRCM_RNGCLK_MGT (0x284)
+#define PRCM_UICCCLK_MGT (0x27C)
+#define PRCM_MSP1CLK_MGT (0x288)
+
+#define PRCM_ARM_PLLDIVPS (prcmu_base + 0x118)
#define PRCM_ARM_PLLDIVPS_ARM_BRM_RATE 0x3f
#define PRCM_ARM_PLLDIVPS_MAX_MASK 0xf
-#define PRCM_PLLARM_LOCKP (_PRCMU_BASE + 0x0a8)
+#define PRCM_PLLARM_LOCKP (prcmu_base + 0x0a8)
#define PRCM_PLLARM_LOCKP_PRCM_PLLARM_LOCKP3 0x2
-#define PRCM_ARM_CHGCLKREQ (_PRCMU_BASE + 0x114)
+#define PRCM_ARM_CHGCLKREQ (prcmu_base + 0x114)
#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ BIT(0)
#define PRCM_ARM_CHGCLKREQ_PRCM_ARM_DIVSEL BIT(16)
-#define PRCM_PLLARM_ENABLE (_PRCMU_BASE + 0x98)
+#define PRCM_PLLARM_ENABLE (prcmu_base + 0x98)
#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_ENABLE 0x1
#define PRCM_PLLARM_ENABLE_PRCM_PLLARM_COUNTON 0x100
-#define PRCM_ARMCLKFIX_MGT (_PRCMU_BASE + 0x0)
-#define PRCM_A9PL_FORCE_CLKEN (_PRCMU_BASE + 0x19C)
-#define PRCM_A9_RESETN_CLR (_PRCMU_BASE + 0x1f4)
-#define PRCM_A9_RESETN_SET (_PRCMU_BASE + 0x1f0)
-#define PRCM_ARM_LS_CLAMP (_PRCMU_BASE + 0x30c)
-#define PRCM_SRAM_A9 (_PRCMU_BASE + 0x308)
+#define PRCM_ARMCLKFIX_MGT (prcmu_base + 0x0)
+#define PRCM_A9PL_FORCE_CLKEN (prcmu_base + 0x19C)
+#define PRCM_A9_RESETN_CLR (prcmu_base + 0x1f4)
+#define PRCM_A9_RESETN_SET (prcmu_base + 0x1f0)
+#define PRCM_ARM_LS_CLAMP (prcmu_base + 0x30c)
+#define PRCM_SRAM_A9 (prcmu_base + 0x308)
#define PRCM_A9PL_FORCE_CLKEN_PRCM_A9PL_FORCE_CLKEN BIT(0)
#define PRCM_A9PL_FORCE_CLKEN_PRCM_A9AXI_FORCE_CLKEN BIT(1)
/* ARM WFI Standby signal register */
-#define PRCM_ARM_WFI_STANDBY (_PRCMU_BASE + 0x130)
+#define PRCM_ARM_WFI_STANDBY (prcmu_base + 0x130)
#define PRCM_ARM_WFI_STANDBY_WFI0 0x08
#define PRCM_ARM_WFI_STANDBY_WFI1 0x10
-#define PRCM_IOCR (_PRCMU_BASE + 0x310)
+#define PRCM_IOCR (prcmu_base + 0x310)
#define PRCM_IOCR_IOFORCE 0x1
/* CPU mailbox registers */
-#define PRCM_MBOX_CPU_VAL (_PRCMU_BASE + 0x0fc)
-#define PRCM_MBOX_CPU_SET (_PRCMU_BASE + 0x100)
-#define PRCM_MBOX_CPU_CLR (_PRCMU_BASE + 0x104)
+#define PRCM_MBOX_CPU_VAL (prcmu_base + 0x0fc)
+#define PRCM_MBOX_CPU_SET (prcmu_base + 0x100)
+#define PRCM_MBOX_CPU_CLR (prcmu_base + 0x104)
/* Dual A9 core interrupt management unit registers */
-#define PRCM_A9_MASK_REQ (_PRCMU_BASE + 0x328)
+#define PRCM_A9_MASK_REQ (prcmu_base + 0x328)
#define PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ 0x1
-#define PRCM_A9_MASK_ACK (_PRCMU_BASE + 0x32c)
-#define PRCM_ARMITMSK31TO0 (_PRCMU_BASE + 0x11c)
-#define PRCM_ARMITMSK63TO32 (_PRCMU_BASE + 0x120)
-#define PRCM_ARMITMSK95TO64 (_PRCMU_BASE + 0x124)
-#define PRCM_ARMITMSK127TO96 (_PRCMU_BASE + 0x128)
-#define PRCM_POWER_STATE_VAL (_PRCMU_BASE + 0x25C)
-#define PRCM_ARMITVAL31TO0 (_PRCMU_BASE + 0x260)
-#define PRCM_ARMITVAL63TO32 (_PRCMU_BASE + 0x264)
-#define PRCM_ARMITVAL95TO64 (_PRCMU_BASE + 0x268)
-#define PRCM_ARMITVAL127TO96 (_PRCMU_BASE + 0x26C)
-
-#define PRCM_HOSTACCESS_REQ (_PRCMU_BASE + 0x334)
+#define PRCM_A9_MASK_ACK (prcmu_base + 0x32c)
+#define PRCM_ARMITMSK31TO0 (prcmu_base + 0x11c)
+#define PRCM_ARMITMSK63TO32 (prcmu_base + 0x120)
+#define PRCM_ARMITMSK95TO64 (prcmu_base + 0x124)
+#define PRCM_ARMITMSK127TO96 (prcmu_base + 0x128)
+#define PRCM_POWER_STATE_VAL (prcmu_base + 0x25C)
+#define PRCM_ARMITVAL31TO0 (prcmu_base + 0x260)
+#define PRCM_ARMITVAL63TO32 (prcmu_base + 0x264)
+#define PRCM_ARMITVAL95TO64 (prcmu_base + 0x268)
+#define PRCM_ARMITVAL127TO96 (prcmu_base + 0x26C)
+
+#define PRCM_HOSTACCESS_REQ (prcmu_base + 0x334)
#define PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ 0x1
#define PRCM_HOSTACCESS_REQ_WAKE_REQ BIT(16)
#define ARM_WAKEUP_MODEM 0x1
-#define PRCM_ARM_IT1_CLR (_PRCMU_BASE + 0x48C)
-#define PRCM_ARM_IT1_VAL (_PRCMU_BASE + 0x494)
-#define PRCM_HOLD_EVT (_PRCMU_BASE + 0x174)
+#define PRCM_ARM_IT1_CLR (prcmu_base + 0x48C)
+#define PRCM_ARM_IT1_VAL (prcmu_base + 0x494)
+#define PRCM_HOLD_EVT (prcmu_base + 0x174)
-#define PRCM_MOD_AWAKE_STATUS (_PRCMU_BASE + 0x4A0)
+#define PRCM_MOD_AWAKE_STATUS (prcmu_base + 0x4A0)
#define PRCM_MOD_AWAKE_STATUS_PRCM_MOD_COREPD_AWAKE BIT(0)
#define PRCM_MOD_AWAKE_STATUS_PRCM_MOD_AAPD_AWAKE BIT(1)
#define PRCM_MOD_AWAKE_STATUS_PRCM_MOD_VMODEM_OFF_ISO BIT(2)
-#define PRCM_ITSTATUS0 (_PRCMU_BASE + 0x148)
-#define PRCM_ITSTATUS1 (_PRCMU_BASE + 0x150)
-#define PRCM_ITSTATUS2 (_PRCMU_BASE + 0x158)
-#define PRCM_ITSTATUS3 (_PRCMU_BASE + 0x160)
-#define PRCM_ITSTATUS4 (_PRCMU_BASE + 0x168)
-#define PRCM_ITSTATUS5 (_PRCMU_BASE + 0x484)
-#define PRCM_ITCLEAR5 (_PRCMU_BASE + 0x488)
-#define PRCM_ARMIT_MASKXP70_IT (_PRCMU_BASE + 0x1018)
+#define PRCM_ITSTATUS0 (prcmu_base + 0x148)
+#define PRCM_ITSTATUS1 (prcmu_base + 0x150)
+#define PRCM_ITSTATUS2 (prcmu_base + 0x158)
+#define PRCM_ITSTATUS3 (prcmu_base + 0x160)
+#define PRCM_ITSTATUS4 (prcmu_base + 0x168)
+#define PRCM_ITSTATUS5 (prcmu_base + 0x484)
+#define PRCM_ITCLEAR5 (prcmu_base + 0x488)
+#define PRCM_ARMIT_MASKXP70_IT (prcmu_base + 0x1018)
/* System reset register */
-#define PRCM_APE_SOFTRST (_PRCMU_BASE + 0x228)
+#define PRCM_APE_SOFTRST (prcmu_base + 0x228)
/* Level shifter and clamp control registers */
-#define PRCM_MMIP_LS_CLAMP_SET (_PRCMU_BASE + 0x420)
-#define PRCM_MMIP_LS_CLAMP_CLR (_PRCMU_BASE + 0x424)
+#define PRCM_MMIP_LS_CLAMP_SET (prcmu_base + 0x420)
+#define PRCM_MMIP_LS_CLAMP_CLR (prcmu_base + 0x424)
#define PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMP BIT(11)
#define PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMPI BIT(22)
/* PRCMU clock/PLL/reset registers */
-#define PRCM_PLLSOC0_FREQ (_PRCMU_BASE + 0x080)
-#define PRCM_PLLSOC1_FREQ (_PRCMU_BASE + 0x084)
-#define PRCM_PLLARM_FREQ (_PRCMU_BASE + 0x088)
-#define PRCM_PLLDDR_FREQ (_PRCMU_BASE + 0x08C)
+#define PRCM_PLLSOC0_FREQ (prcmu_base + 0x080)
+#define PRCM_PLLSOC1_FREQ (prcmu_base + 0x084)
+#define PRCM_PLLARM_FREQ (prcmu_base + 0x088)
+#define PRCM_PLLDDR_FREQ (prcmu_base + 0x08C)
#define PRCM_PLL_FREQ_D_SHIFT 0
#define PRCM_PLL_FREQ_D_MASK BITS(0, 7)
#define PRCM_PLL_FREQ_N_SHIFT 8
@@ -152,14 +148,14 @@
#define PRCM_PLL_FREQ_SELDIV2 BIT(24)
#define PRCM_PLL_FREQ_DIV2EN BIT(25)
-#define PRCM_PLLDSI_FREQ (_PRCMU_BASE + 0x500)
-#define PRCM_PLLDSI_ENABLE (_PRCMU_BASE + 0x504)
-#define PRCM_PLLDSI_LOCKP (_PRCMU_BASE + 0x508)
-#define PRCM_DSI_PLLOUT_SEL (_PRCMU_BASE + 0x530)
-#define PRCM_DSITVCLK_DIV (_PRCMU_BASE + 0x52C)
-#define PRCM_PLLDSI_LOCKP (_PRCMU_BASE + 0x508)
-#define PRCM_APE_RESETN_SET (_PRCMU_BASE + 0x1E4)
-#define PRCM_APE_RESETN_CLR (_PRCMU_BASE + 0x1E8)
+#define PRCM_PLLDSI_FREQ (prcmu_base + 0x500)
+#define PRCM_PLLDSI_ENABLE (prcmu_base + 0x504)
+#define PRCM_PLLDSI_LOCKP (prcmu_base + 0x508)
+#define PRCM_DSI_PLLOUT_SEL (prcmu_base + 0x530)
+#define PRCM_DSITVCLK_DIV (prcmu_base + 0x52C)
+#define PRCM_PLLDSI_LOCKP (prcmu_base + 0x508)
+#define PRCM_APE_RESETN_SET (prcmu_base + 0x1E4)
+#define PRCM_APE_RESETN_CLR (prcmu_base + 0x1E8)
#define PRCM_PLLDSI_ENABLE_PRCM_PLLDSI_ENABLE BIT(0)
@@ -188,30 +184,30 @@
#define PRCM_APE_RESETN_DSIPLL_RESETN BIT(14)
-#define PRCM_CLKOCR (_PRCMU_BASE + 0x1CC)
+#define PRCM_CLKOCR (prcmu_base + 0x1CC)
#define PRCM_CLKOCR_CLKOUT0_REF_CLK (1 << 0)
#define PRCM_CLKOCR_CLKOUT0_MASK BITS(0, 13)
#define PRCM_CLKOCR_CLKOUT1_REF_CLK (1 << 16)
#define PRCM_CLKOCR_CLKOUT1_MASK BITS(16, 29)
/* ePOD and memory power signal control registers */
-#define PRCM_EPOD_C_SET (_PRCMU_BASE + 0x410)
-#define PRCM_SRAM_LS_SLEEP (_PRCMU_BASE + 0x304)
+#define PRCM_EPOD_C_SET (prcmu_base + 0x410)
+#define PRCM_SRAM_LS_SLEEP (prcmu_base + 0x304)
/* Debug power control unit registers */
-#define PRCM_POWER_STATE_SET (_PRCMU_BASE + 0x254)
+#define PRCM_POWER_STATE_SET (prcmu_base + 0x254)
/* Miscellaneous unit registers */
-#define PRCM_DSI_SW_RESET (_PRCMU_BASE + 0x324)
-#define PRCM_GPIOCR (_PRCMU_BASE + 0x138)
+#define PRCM_DSI_SW_RESET (prcmu_base + 0x324)
+#define PRCM_GPIOCR (prcmu_base + 0x138)
#define PRCM_GPIOCR_DBG_STM_MOD_CMD1 0x800
#define PRCM_GPIOCR_DBG_UARTMOD_CMD0 0x1
/* PRCMU HW semaphore */
-#define PRCM_SEM (_PRCMU_BASE + 0x400)
+#define PRCM_SEM (prcmu_base + 0x400)
#define PRCM_SEM_PRCM_SEM BIT(0)
-#define PRCM_TCR (_PRCMU_BASE + 0x1C8)
+#define PRCM_TCR (prcmu_base + 0x1C8)
#define PRCM_TCR_TENSEL_MASK BITS(0, 7)
#define PRCM_TCR_STOP_TIMERS BIT(16)
#define PRCM_TCR_DOZE_MODE BIT(17)
@@ -239,15 +235,15 @@
/* GPIOCR register */
#define PRCM_GPIOCR_SPI2_SELECT BIT(23)
-#define PRCM_DDR_SUBSYS_APE_MINBW (_PRCMU_BASE + 0x438)
-#define PRCM_CGATING_BYPASS (_PRCMU_BASE + 0x134)
+#define PRCM_DDR_SUBSYS_APE_MINBW (prcmu_base + 0x438)
+#define PRCM_CGATING_BYPASS (prcmu_base + 0x134)
#define PRCM_CGATING_BYPASS_ICN2 BIT(6)
/* Miscellaneous unit registers */
-#define PRCM_RESOUTN_SET (_PRCMU_BASE + 0x214)
-#define PRCM_RESOUTN_CLR (_PRCMU_BASE + 0x218)
+#define PRCM_RESOUTN_SET (prcmu_base + 0x214)
+#define PRCM_RESOUTN_CLR (prcmu_base + 0x218)
/* System reset register */
-#define PRCM_APE_SOFTRST (_PRCMU_BASE + 0x228)
+#define PRCM_APE_SOFTRST (prcmu_base + 0x228)
#endif /* __DB8500_PRCMU_REGS_H */