@@ -51,7 +51,8 @@ dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
integratorcp.dtb
dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
-dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \
+dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
+ kirkwood-dns320.dtb \
kirkwood-dns325.dtb \
kirkwood-dockstar.dtb \
kirkwood-dreamplug.dtb \
new file mode 100644
@@ -0,0 +1,89 @@
+/dts-v1/;
+
+/include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
+
+/ {
+ model = "LaCie CloudBox";
+ compatible = "lacie,cloudbox", "marvell,kirkwood-88f6702", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ ocp@f1000000 {
+ pinctrl: pinctrl@10000 {
+ pinctrl-0 = < &pmx_spi &pmx_uart0
+ &pmx_cloudbox_sata0 >;
+ pinctrl-names = "default";
+
+ pmx_cloudbox_sata0: pmx-cloudbox-sata0 {
+ marvell,pins = "mpp15";
+ marvell,function = "sata0";
+ };
+ };
+
+ serial@12000 {
+ clock-frequency = <166666667>;
+ status = "okay";
+ };
+
+ sata@80000 {
+ status = "okay";
+ nr-ports = <1>;
+ };
+
+ spi@10600 {
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mx25l4005a";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ mode = <0>;
+
+ partition@0 {
+ reg = <0x0 0x80000>;
+ label = "u-boot";
+ };
+ };
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@1 {
+ label = "Power push button";
+ linux,code = <116>;
+ gpios = <&gpio0 16 1>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ red-fail {
+ label = "cloudbox:red:fail";
+ gpios = <&gpio0 14 0>;
+ };
+ blue-sata {
+ label = "cloudbox:blue:sata";
+ gpios = <&gpio0 15 0>;
+ };
+ };
+
+ gpio_poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&gpio0 17 0>;
+ };
+};
@@ -30,6 +30,7 @@ CONFIG_MACH_SHEEVAPLUG=y
CONFIG_MACH_T5325=y
CONFIG_MACH_TS219=y
CONFIG_MACH_TS41X=y
+CONFIG_MACH_CLOUDBOX_DT=y
CONFIG_MACH_DLINK_KIRKWOOD_DT=y
CONFIG_MACH_DOCKSTAR_DT=y
CONFIG_MACH_DREAMPLUG_DT=y
@@ -146,6 +146,13 @@ config ARCH_KIRKWOOD_DT
Say 'Y' here if you want your kernel to support the
Marvell Kirkwood using flattened device tree.
+config MACH_CLOUDBOX_DT
+ bool "LaCie CloudBox NAS (Flattened Device Tree)"
+ select ARCH_KIRKWOOD_DT
+ help
+ Say 'Y' here if you want your kernel to support the LaCie
+ CloudBox NAS, using Flattened Device Tree.
+
config MACH_DLINK_KIRKWOOD_DT
bool "D-Link Kirkwood-based NAS (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
@@ -20,6 +20,7 @@ obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o
obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o
obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o
+obj-$(CONFIG_MACH_CLOUDBOX_DT) += board-ns2.o
obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o
obj-$(CONFIG_MACH_DOCKSTAR_DT) += board-dockstar.o
obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o
@@ -139,11 +139,12 @@ static void __init kirkwood_dt_init(void)
if (of_machine_is_compatible("keymile,km_kirkwood"))
km_kirkwood_init();
- if (of_machine_is_compatible("lacie,inetspace_v2") ||
- of_machine_is_compatible("lacie,netspace_v2") ||
- of_machine_is_compatible("lacie,netspace_max_v2") ||
+ if (of_machine_is_compatible("lacie,cloudbox") ||
+ of_machine_is_compatible("lacie,inetspace_v2") ||
of_machine_is_compatible("lacie,netspace_lite_v2") ||
- of_machine_is_compatible("lacie,netspace_mini_v2"))
+ of_machine_is_compatible("lacie,netspace_max_v2") ||
+ of_machine_is_compatible("lacie,netspace_mini_v2") ||
+ of_machine_is_compatible("lacie,netspace_v2"))
ns2_init();
if (of_machine_is_compatible("mpl,cec4"))
@@ -174,11 +175,12 @@ static const char * const kirkwood_dt_board_compat[] = {
"buffalo,lsxl",
"iom,ix2-200",
"keymile,km_kirkwood",
+ "lacie,cloudbox",
"lacie,inetspace_v2",
- "lacie,netspace_max_v2",
- "lacie,netspace_v2",
"lacie,netspace_lite_v2",
+ "lacie,netspace_max_v2",
"lacie,netspace_mini_v2",
+ "lacie,netspace_v2",
"mpl,cec4",
"netgear,readynas-duo-v2",
"plathome,openblocks-a6",
@@ -27,7 +27,8 @@ void __init ns2_init(void)
/*
* Basic setup. Needs to be called early.
*/
- if (of_machine_is_compatible("lacie,netspace_lite_v2") ||
+ if (of_machine_is_compatible("lacie,cloudbox") ||
+ of_machine_is_compatible("lacie,netspace_lite_v2") ||
of_machine_is_compatible("lacie,netspace_mini_v2"))
ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
kirkwood_ge00_init(&ns2_ge00_data);
@@ -153,6 +153,12 @@ void usi_topkick_init(void);
static inline void usi_topkick_init(void) {};
#endif
+#ifdef CONFIG_MACH_CLOUDBOX_DT
+void cloudbox_init(void);
+#else
+static inline void cloudbox_init(void) {};
+#endif
+
/* early init functions not converted to fdt yet */
char *kirkwood_id(void);
void kirkwood_l2_init(void);
This patch adds DT board setup for the LaCie NAS CloudBox. The CloudBox is a low cost NAS based on the Network Space v2. Chipset list: - CPU MARVELL 88F6702 1Ghz - SDRAM memory: 256MB DDR2-800 (2x128MB x8) 400Mhz - 1 Ethernet Gigabit port (PHY MARVELL 88E1318) - SPI flash, NOR 512KB - 1 push button - 2 LEDs (red and blue) There is no EEPROM and no USB ports embedded. Note that this board must not be confused with the Network Space Mini v2 which is embedded in a previous LaCie product also named CloudBox. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> --- Changes for v2: - Rebase against Jason's branch marvell/mvebu/boards. - Remove i2c pinctrl declaration (not used). - For all modified files, respect alphabetical order while inserting cloudbox entries. - Enhance patch description to avoid confusion between the two LaCie products named CloudBox. arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/kirkwood-cloudbox.dts | 89 +++++++++++++++++++++++++++++++ arch/arm/configs/kirkwood_defconfig | 1 + arch/arm/mach-kirkwood/Kconfig | 7 +++ arch/arm/mach-kirkwood/Makefile | 1 + arch/arm/mach-kirkwood/board-dt.c | 14 ++--- arch/arm/mach-kirkwood/board-ns2.c | 3 +- arch/arm/mach-kirkwood/common.h | 6 +++ 8 files changed, 116 insertions(+), 8 deletions(-) create mode 100644 arch/arm/boot/dts/kirkwood-cloudbox.dts