| Message ID | 1365679443-25456-1-git-send-email-hechtb+renesas@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, Apr 11, 2013 at 01:23:57PM +0200, Bastian Hecht wrote: > The SH mobile series currently features 3 timer devices in the kernel: > Compare Match Timer (CMT), Timer Unit (TMU) and MTU2. These devices > share register layout characteristics amongst each that enable us to > define common DT bindings for them. > > Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com> > --- > v4: same. only patch 2 and 3 changed As per my recent email regarding "ARM: shmobile: sh73a0: Add timer DT names to clock list", I have dropped this patch which was previously queued-up for v3.11. > > .../devicetree/bindings/timer/renesas,timer.txt | 45 ++++++++++++++++++++ > 1 file changed, 45 insertions(+) > create mode 100644 Documentation/devicetree/bindings/timer/renesas,timer.txt > > diff --git a/Documentation/devicetree/bindings/timer/renesas,timer.txt b/Documentation/devicetree/bindings/timer/renesas,timer.txt > new file mode 100644 > index 0000000..2c001bf > --- /dev/null > +++ b/Documentation/devicetree/bindings/timer/renesas,timer.txt > @@ -0,0 +1,45 @@ > +* Renesas SH Mobile Timer > + > +Bindings for several timer devices from Renesas including CMT, TMU and MTU2. > + > +Required properties: > +- compatible : Should be "renesas,{device}-timer", > + whereas device is "cmt", "tmu" or "mtu2". > +- reg : Address and length of the register set for the device > +- interrupts : Timer interrupt > +- renesas,device-id : The ID of the timer device > +- renesas,channel-id : The channel ID of the timer device > +- renesas,source-quality : The viability to use this device as a free > + running clock. From 0 (do not use) to 10 (best possible clock). > +- renesas,event-quality : The viability to use this device as an event > + generator. From 0 (do not use) to 10 (best possible clock). > + > +The properties renesas,{source,event}-quality reflect the situation that the > +usability of the timer devices depend on the location within their SoCs. E.g. > +the power domain affinty affects power management, some mux-ed lines might be > +preferred to be assigned to other functions and other constraints. > + > +Example for CMT1 channel 0 on the R8A7740 SoC: > + > + timer@e6138010 { > + compatible = "renesas,cmt-timer"; > + interrupt-parent = <&intca>; > + reg = <0xe6138010 0xc>; > + interrupts = <0x0b00>; > + renesas,device-id = <1>; > + renesas,channel-id = <0>; > + renesas,source-quality = <3>; > + renesas,event-quality = <3>; > + }; > + > +Example for TMU0 channel 1 on the SH7372 SoC: > + timer@fff60014 { > + compatible = "renesas,tmu-timer"; > + interrupt-parent = <&intcs>; > + reg = <0xfff60014 0xc>; > + interrupts = <0xea0>; > + renesas,device-id = <0>; > + renesas,channel-id = <1>; > + renesas,source-quality = <4>; > + renesas,event-quality = <0>; > + }; > -- > 1.7.9.5 >
diff --git a/Documentation/devicetree/bindings/timer/renesas,timer.txt b/Documentation/devicetree/bindings/timer/renesas,timer.txt new file mode 100644 index 0000000..2c001bf --- /dev/null +++ b/Documentation/devicetree/bindings/timer/renesas,timer.txt @@ -0,0 +1,45 @@ +* Renesas SH Mobile Timer + +Bindings for several timer devices from Renesas including CMT, TMU and MTU2. + +Required properties: +- compatible : Should be "renesas,{device}-timer", + whereas device is "cmt", "tmu" or "mtu2". +- reg : Address and length of the register set for the device +- interrupts : Timer interrupt +- renesas,device-id : The ID of the timer device +- renesas,channel-id : The channel ID of the timer device +- renesas,source-quality : The viability to use this device as a free + running clock. From 0 (do not use) to 10 (best possible clock). +- renesas,event-quality : The viability to use this device as an event + generator. From 0 (do not use) to 10 (best possible clock). + +The properties renesas,{source,event}-quality reflect the situation that the +usability of the timer devices depend on the location within their SoCs. E.g. +the power domain affinty affects power management, some mux-ed lines might be +preferred to be assigned to other functions and other constraints. + +Example for CMT1 channel 0 on the R8A7740 SoC: + + timer@e6138010 { + compatible = "renesas,cmt-timer"; + interrupt-parent = <&intca>; + reg = <0xe6138010 0xc>; + interrupts = <0x0b00>; + renesas,device-id = <1>; + renesas,channel-id = <0>; + renesas,source-quality = <3>; + renesas,event-quality = <3>; + }; + +Example for TMU0 channel 1 on the SH7372 SoC: + timer@fff60014 { + compatible = "renesas,tmu-timer"; + interrupt-parent = <&intcs>; + reg = <0xfff60014 0xc>; + interrupts = <0xea0>; + renesas,device-id = <0>; + renesas,channel-id = <1>; + renesas,source-quality = <4>; + renesas,event-quality = <0>; + };
The SH mobile series currently features 3 timer devices in the kernel: Compare Match Timer (CMT), Timer Unit (TMU) and MTU2. These devices share register layout characteristics amongst each that enable us to define common DT bindings for them. Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com> --- v4: same. only patch 2 and 3 changed .../devicetree/bindings/timer/renesas,timer.txt | 45 ++++++++++++++++++++ 1 file changed, 45 insertions(+) create mode 100644 Documentation/devicetree/bindings/timer/renesas,timer.txt